• 한국CDE학회논문집
• /
• 제10권4호
• /
• pp.262-273
• /
• 2005

For CAD data users, few things are as frustrating as receiving CAD data that is unusable due to poor data quality. Users waste time trying to get better data, fixing the data, or even rebuilding the data from scratch from paper drawings or other sources. Most related works and commercial tools handle the boundary representation (B-Rep) shape of CAD models. However, we propose a design history?based approach for healing CAD model errors. Because the design history, which covers the features, the history tree, the parameterization data and constraints, reflects the design intent, CAD model errors can be healed by an interdependency analysis of the feature commands or of the parametric data of each feature command, and by the reconstruction of these feature commands through the rule-based reasoning of an expert system. Unlike other B Rep correction methods, our method automatically heals parametric feature models without translating them to a B-Rep shape, and it also preserves engineering information.

• 한국정밀공학회지
• /
• 제13권6호
• /
• pp.27-33
• /
• 1996

In this study, a CAD/CAM system for axisymmetric deep drawing processes has been developed. An approach to the system is based on the knowledge based system. Under the environment of CAD/CAM software of Personal Designer, the system has been written in UPL. The geometries of intermediate and final object in deep drawing process, including processes parameters are input for the CAD/CAM system. The input data can be obtained from the results of Pro_Deep. The parts drawing of die sets for each process is generated in tool design module of the CAD/CAM system. Also. the die assembly drawings can be obtained. NC commands for machining of the part can be generated in the developed CAD/CAM system.

• 한국정보과학회논문지:시스템및이론
• /
• 제33권4호
• /
• pp.205-215
• /
• 2006

LCB 타블렛과 타블렛 PC 등과 같은 펜-입력 디스플레이는 CAD에서, 특히, 컨셉트 디자인 단계에서 유용하게 사용될 수 있다. 본 논문에서는, 이런 장치들을 대상으로 하는 CAD 시스템에서 사용될 수 있는 직관적인 B-Spline 수정 방법을 제안한다. 컨트롤 포인트를 기반으로 하는 B-Spline 수정 방법과는 달리, 본 논문에서 제안한 방법은 곡선이나 곡면의 최종적인 모양을 결정하는데 사용자의 펜 입력을 이용한다. 이전에 방법에서 컨트롤 포인트나 조작자(manipulator)를 이용했던 것에 비해 원하는 모양을 만들어 가는 데 소요되는 시간을 줄여준다. 이런 과정은 디자인을 하는데 있어서 지금까지는 피할 수 없는 것처럼 여겨져 왔다. 본 논문에서 제시된 방법의 용이성을 검증하기 위하여 여러 명의 디자이너들과 함께 실험을 수행한 결과를 보여준다.

• KSBB Journal
• /
• 제13권4호
• /
• pp.383-390
• /
• 1998

Bacillus subtilis DT134 was resistant to 50-fold higher concentration of cadmium ions (Cd2+) than cadmium-sensitive B. subtilis BD224 in Luria Broth (LB) medium. Minimal inhibition concentration test in LB agar plates also showed similar results. The elevated cadmium resistance of B. subtilis DT134 strongly suggested a possible existence of cadmium resistance gene in it. Southern blot with Staphylococcus aureus cadA gene fragment (757 bp NlaIV-XmnI cadA DNA fragment) as probe was carried out to test the existence and similarity of the gene. In high stringency condition, there was no detectable signal, but in low stringency, a strong signal specific to the cadA probe could be detected. These results strongly suggested that there was some similarity between total DNA of B. subtilis DT134 and S. aureus pl258 in terms of cadmium resistance gene and the resistance mechanism might be an efflux mechanism. The subsequent efflux experiment showed that the cadmium resistance mechanism of B. subtilis DT134 was also due to the efflux of cadmium.

• International Journal of CAD/CAM
• /
• 제7권1호
• /
• pp.1-10
• /
• 2007

The compression of CAD models is a key technology for realizing Internet-based collaborative product development because big model sizes often prohibit us to achieve a rapid product information transmission. Although there exist some algorithms for compressing discrete CAD models, original precise CAD models are focused on in this paper. Here, the characteristics of hierarchical structures in CAD models and the distribution of their redundant data are exploited for developing a novel data encoding method. In the method, different encoding rules are applied to different types of data. Geometric data is a major concern for reducing model sizes. For geometric data, the control points of B-spline curves and surfaces are compressed with the second-order predictions in a local coordinate system. Based on analysis to the distortion induced by quantization, an efficient method for computation of the distortion is provided. The results indicate that the data size of CAD models can be decreased efficiently after compressed with the proposed method.

• Journal of Microbiology and Biotechnology
• /
• 제19권10호
• /
• pp.1122-1126
• /
• 2009

The exogenously added cadaverine is effective in protecting Vibrio vulnificus from methyl viologen (MV)-induced superoxide stress at pH 8.5. Such a protective effect by cadaverine was not observed at pH 7.5. Consistently, the accumulated level of intracellular cadaverine at pH 8.5 is approximately four times as much as that of the control cell at pH 7.5. Cadaverine accumulation is not affected by MV. The protection of V. vulnificus by cadaverine from superoxide stress was abolished when cadB coding for the lysine-cadaverine antiporter was interrupted. However, the cadaverine-mediated protection was complemented with cadB DNA. Therefore, CadB of V. vulnificus not only acts as a lysine-cadaverine antiporter at acid pH to neutralize the external medium, but also mediates cadaverine uptake at alkaline pH to result in cell protection from superoxide stress.

• The Journal of Advanced Prosthodontics
• /
• 제11권2호
• /
• pp.95-104
• /
• 2019

PURPOSE. To evaluate the effect of surface treatments and repair materials on the shear bond strength and to measure the fracture toughness of CAD/CAM provisional restoration materials. MATERIALS AND METHODS. Four CAD/CAM (3D printing: Nextdent C&B and ZMD-1000B Temporary, CAD/CAM resin block: Yamahachi PMMA disk and Huge PMMA block) and four conventional (monometacrylate: Jet and Alike, dimetacrylate: Luxatemp and Protemp 4) materials were selected to fabricate disk-shaped specimens and divided into six groups according to surface treatment (n=10). CAD/CAM materials were repaired with Jet or Luxatemp, while conventional materials were repaired with their own materials. The shear bond strength was measured by using universal testing machine. Ten rectangular column-shaped specimens for each material were fabricated to measure the fracture toughness by single edge v notched beam technique. Statistical analysis was performed by one-way ANOVA. RESULTS. The highest shear bond strength of CAD/CAM materials was achieved by SiC paper + sandblasting. It was also accomplished when repairing 3D printing materials with Luxatemp, and repairing CAD/CAM resin blocks with Jet. Yamahachi PMMA disk showed the highest fracture toughness. Nextdent C&B showed the lowest fracture toughness value but no statistically significant difference from Alike and Luxatemp (P>.05). CONCLUSION. In order to successfully repair the CAD/CAM provisional restoration, mechanical surface treatment and appropriate repair material according to the CAD/CAM material type should be selected. The CAD/CAM provisional materials have proper mechanical properties for clinical use as compared to conventional materials.

• 한국생산제조학회지
• /
• 제22권6호
• /
• pp.1025-1031
• /
• 2013

A library of parametric CAD models should be provided for the reuse of design data in configuration design. Mechanical products have many options and parameters, which in turn, require a large number of CAD models for configuration designs. Existing methods for library construction are limited in their ability to decrease the number of CAD models and ensure independency between the configuration design system and the library. To solve these problems, we propose a method that controls a CAD library based on part-shape information model, and also present its technical details. To verify the proposed method, a CAD library for bicycles was constructed and design modification experiments using a prototype part-shape controller were performed. From the experiments, we found that the proposed method can effectively decrease the required number of CAD models by reusing models for configuration designs.

• 대한기계학회논문집A
• /
• 제30권5호
• /
• pp.488-495
• /
• 2006

The demand for the use of 3D CAD data over the Internet environment has been increased. However, transmission of 3D CAD data has delayed the communication effectiveness because of the CAD data size. Lightweight CAD file design methodology is required for rapid transmission in the distributed environment. In this paper, to derive lightweight CAD files from commercial CAD systems, a file translation system producing a native file is constructed first by using the InterOp and API of the ACIS kernel. Using the B-rep model and mesh data extracted from the native file, the lightweight CAD file with topological information is constructed as a binary file. Since the lightweight CAD file retains topological information, it is applied to the dimensional verification, digital mock-ups and visualization of CAD files. Effectiveness of the proposed lightweight CAD file is confirmed through various case studies.

• International Journal of CAD/CAM
• /
• 제3권1_2호
• /
• pp.13-17
• /
• 2003

Hybrid method of representing geometric entities as combination of boundary (B-rep) and functional (F-rep) representations is presented which can be used as a basis of solid modeling kernel. It contains whole functionality of classic B-rep kernel, and also supports enveloping (sweep of solid body). Principles and keysolutions are considered. Example of a real task that comes from gearing is provided.