• Korean Journal of Computational Design and Engineering
• /
• v.10 no.4
• /
• pp.262-273
• /
• 2005

For CAD data users, few things are as frustrating as receiving CAD data that is unusable due to poor data quality. Users waste time trying to get better data, fixing the data, or even rebuilding the data from scratch from paper drawings or other sources. Most related works and commercial tools handle the boundary representation (B-Rep) shape of CAD models. However, we propose a design history?based approach for healing CAD model errors. Because the design history, which covers the features, the history tree, the parameterization data and constraints, reflects the design intent, CAD model errors can be healed by an interdependency analysis of the feature commands or of the parametric data of each feature command, and by the reconstruction of these feature commands through the rule-based reasoning of an expert system. Unlike other B Rep correction methods, our method automatically heals parametric feature models without translating them to a B-Rep shape, and it also preserves engineering information.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.6
• /
• pp.27-33
• /
• 1996

In this study, a CAD/CAM system for axisymmetric deep drawing processes has been developed. An approach to the system is based on the knowledge based system. Under the environment of CAD/CAM software of Personal Designer, the system has been written in UPL. The geometries of intermediate and final object in deep drawing process, including processes parameters are input for the CAD/CAM system. The input data can be obtained from the results of Pro_Deep. The parts drawing of die sets for each process is generated in tool design module of the CAD/CAM system. Also. the die assembly drawings can be obtained. NC commands for machining of the part can be generated in the developed CAD/CAM system.

• Journal of KIISE:Computer Systems and Theory
• /
• v.33 no.4
• /
• pp.205-215
• /
• 2006

Pen-input displays, such as LCD tablets and tablet PCs, are already popular for its usability in CAD design, in particular. in concept design phase. We propose an intuitive B-Spline modification scheme that can be used for the CAD systems targeting for such devices. Differently from the control point based modification schemes for the B-splines, our scheme relates user pen marking to determining the final shape of the target curve and surface. This, eventually, reduces time for interacting with the shape parameters (i.e., by control points or direct manipulators), which has been regarded as an unavoidable routine tasks for design. To prove its usability, we made an experiments with selected subjects who have been working for industrial design.

• KSBB Journal
• /
• v.13 no.4
• /
• pp.383-390
• /
• 1998

Bacillus subtilis DT134 was resistant to 50-fold higher concentration of cadmium ions (Cd2+) than cadmium-sensitive B. subtilis BD224 in Luria Broth (LB) medium. Minimal inhibition concentration test in LB agar plates also showed similar results. The elevated cadmium resistance of B. subtilis DT134 strongly suggested a possible existence of cadmium resistance gene in it. Southern blot with Staphylococcus aureus cadA gene fragment (757 bp NlaIV-XmnI cadA DNA fragment) as probe was carried out to test the existence and similarity of the gene. In high stringency condition, there was no detectable signal, but in low stringency, a strong signal specific to the cadA probe could be detected. These results strongly suggested that there was some similarity between total DNA of B. subtilis DT134 and S. aureus pl258 in terms of cadmium resistance gene and the resistance mechanism might be an efflux mechanism. The subsequent efflux experiment showed that the cadmium resistance mechanism of B. subtilis DT134 was also due to the efflux of cadmium.

• International Journal of CAD/CAM
• /
• v.7 no.1
• /
• pp.1-10
• /
• 2007

The compression of CAD models is a key technology for realizing Internet-based collaborative product development because big model sizes often prohibit us to achieve a rapid product information transmission. Although there exist some algorithms for compressing discrete CAD models, original precise CAD models are focused on in this paper. Here, the characteristics of hierarchical structures in CAD models and the distribution of their redundant data are exploited for developing a novel data encoding method. In the method, different encoding rules are applied to different types of data. Geometric data is a major concern for reducing model sizes. For geometric data, the control points of B-spline curves and surfaces are compressed with the second-order predictions in a local coordinate system. Based on analysis to the distortion induced by quantization, an efficient method for computation of the distortion is provided. The results indicate that the data size of CAD models can be decreased efficiently after compressed with the proposed method.

• Journal of Microbiology and Biotechnology
• /
• v.19 no.10
• /
• pp.1122-1126
• /
• 2009

The exogenously added cadaverine is effective in protecting Vibrio vulnificus from methyl viologen (MV)-induced superoxide stress at pH 8.5. Such a protective effect by cadaverine was not observed at pH 7.5. Consistently, the accumulated level of intracellular cadaverine at pH 8.5 is approximately four times as much as that of the control cell at pH 7.5. Cadaverine accumulation is not affected by MV. The protection of V. vulnificus by cadaverine from superoxide stress was abolished when cadB coding for the lysine-cadaverine antiporter was interrupted. However, the cadaverine-mediated protection was complemented with cadB DNA. Therefore, CadB of V. vulnificus not only acts as a lysine-cadaverine antiporter at acid pH to neutralize the external medium, but also mediates cadaverine uptake at alkaline pH to result in cell protection from superoxide stress.

• The Journal of Advanced Prosthodontics
• /
• v.11 no.2
• /
• pp.95-104
• /
• 2019

PURPOSE. To evaluate the effect of surface treatments and repair materials on the shear bond strength and to measure the fracture toughness of CAD/CAM provisional restoration materials. MATERIALS AND METHODS. Four CAD/CAM (3D printing: Nextdent C&B and ZMD-1000B Temporary, CAD/CAM resin block: Yamahachi PMMA disk and Huge PMMA block) and four conventional (monometacrylate: Jet and Alike, dimetacrylate: Luxatemp and Protemp 4) materials were selected to fabricate disk-shaped specimens and divided into six groups according to surface treatment (n=10). CAD/CAM materials were repaired with Jet or Luxatemp, while conventional materials were repaired with their own materials. The shear bond strength was measured by using universal testing machine. Ten rectangular column-shaped specimens for each material were fabricated to measure the fracture toughness by single edge v notched beam technique. Statistical analysis was performed by one-way ANOVA. RESULTS. The highest shear bond strength of CAD/CAM materials was achieved by SiC paper + sandblasting. It was also accomplished when repairing 3D printing materials with Luxatemp, and repairing CAD/CAM resin blocks with Jet. Yamahachi PMMA disk showed the highest fracture toughness. Nextdent C&B showed the lowest fracture toughness value but no statistically significant difference from Alike and Luxatemp (P>.05). CONCLUSION. In order to successfully repair the CAD/CAM provisional restoration, mechanical surface treatment and appropriate repair material according to the CAD/CAM material type should be selected. The CAD/CAM provisional materials have proper mechanical properties for clinical use as compared to conventional materials.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.22 no.6
• /
• pp.1025-1031
• /
• 2013

A library of parametric CAD models should be provided for the reuse of design data in configuration design. Mechanical products have many options and parameters, which in turn, require a large number of CAD models for configuration designs. Existing methods for library construction are limited in their ability to decrease the number of CAD models and ensure independency between the configuration design system and the library. To solve these problems, we propose a method that controls a CAD library based on part-shape information model, and also present its technical details. To verify the proposed method, a CAD library for bicycles was constructed and design modification experiments using a prototype part-shape controller were performed. From the experiments, we found that the proposed method can effectively decrease the required number of CAD models by reusing models for configuration designs.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.5 s.248
• /
• pp.488-495
• /
• 2006

The demand for the use of 3D CAD data over the Internet environment has been increased. However, transmission of 3D CAD data has delayed the communication effectiveness because of the CAD data size. Lightweight CAD file design methodology is required for rapid transmission in the distributed environment. In this paper, to derive lightweight CAD files from commercial CAD systems, a file translation system producing a native file is constructed first by using the InterOp and API of the ACIS kernel. Using the B-rep model and mesh data extracted from the native file, the lightweight CAD file with topological information is constructed as a binary file. Since the lightweight CAD file retains topological information, it is applied to the dimensional verification, digital mock-ups and visualization of CAD files. Effectiveness of the proposed lightweight CAD file is confirmed through various case studies.

• International Journal of CAD/CAM
• /
• v.3 no.1_2
• /
• pp.13-17
• /
• 2003

Hybrid method of representing geometric entities as combination of boundary (B-rep) and functional (F-rep) representations is presented which can be used as a basis of solid modeling kernel. It contains whole functionality of classic B-rep kernel, and also supports enveloping (sweep of solid body). Principles and keysolutions are considered. Example of a real task that comes from gearing is provided.