• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.5 no.1
• /
• pp.49-54
• /
• 2004

This paper is purpose to manufacture of inhibitor switch using CAM systems. CAM systems are consist of CAD(AutoCAD), CAM(Omega) software and CNC milling machine. CAM software is purpose to G-code generation for CNC programming. Then CAM software and CNC milling machine are connect to RS-232-C cable for data network.

• Progress in Superconductivity and Cryogenics
• /
• v.7 no.2
• /
• pp.27-30
• /
• 2005

Research and development on superconducting magnetic energy storage (SMES) system have been done to realize efficient electric power management for several decades. Korea Electrotechnology Research Institute (KERI) has developed a 3MJ/750kV A SMES system to improve power quality in sensitive electric loads. It consists of an IGBT based power converter, NbTi mixed matrix Rutherford cable superconducting magnet, and a cryostat with HTS current leads. A computer code was developed to find the parameters of the SMES magnet which has minimum amount of superconductors for the same stored energy, and the 3MJ SMES magnet was designed based upon that. This paper describes the fabrication and experimental results of a 3MJ/750kV A SMES system.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.30A no.11
• /
• pp.29-39
• /
• 1993

For an economical or timely reason, the types of subscriber loops for ISDN basic rate access service will, at least initially, be that of the pre-existing telephone network, that is, 2-wire twisted-pair metallic cable. Therefore, it is important to assess the high-speed digital transmission capability of the 2-wire subscriber loops. In this paper, the impairments such as intersymbol interference, crosstalk, and impulse niose are modeled. And then, symbol error probabilities in terms of SNR in DSL system using ECH and 2B1Q line code are analytically derived and numerically calculated. Also, the relationship between the quality of service required in ISDN subscriber section and the loop parameters is investigated.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1999.05a
• /
• pp.69-74
• /
• 1999

This paper aims to DNC application of car seat cushion die. DNC systems are consist of CAD(CATIA1, CAM(Z-MASTER, OMEGA) software and CNC milling machine. CAM software is purpose to G-code generation for CNC programming. Then CAM software and CNC milling machine are connect to RS-232-C cable for networking.

• Fire Science and Engineering
• /
• v.18 no.4
• /
• pp.64-71
• /
• 2004

This paper describes the result of the pump room fire analysis of the nuclear power plant using CFAST fire modeling code developed by NIST. The sensitivity studies are performed over the input parameters of CFAST: the constrained or unconstrained fire, Lower Oxygen Limit (LOL), Radiative Fraction (RF), and the opening ratio of the fire doors. According to the results, a pump room fire is the ventilation-controlled fire, so it is adequate that the value of LOL is 10% which is also the default value. It is anlayzed that the Radiative Fraction does not affect the temperature of the upper gas layer. It is appeared that the integrity of the cable located at the upper layer is maintained except for the safety pump at the fire area and the Conditional Core Damage Probability (CCDP) is 9.25E-07. It seems that CCDP result is more realistic and less uncertain than that of Fire Hazard Analysis (FHA).

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.281-284
• /
• 2008

This paper describes ASIC design of multimedia SoC Platform. The implemented Platform consists of 32-bit OpenRISC1200 Microprocessor, WISHBONE on-chip bus, VGA Controller, Debug Interface, SRAM Interface and UART. The 32-bit OpenRISC1200 processor has 5 stage pipeline and Harvard architecture with separated instruction/data bus. The VGA Controller can display RCB data on a CRT or LCD monitor. The Debug Interface supports a debugging function for the Platform. The SRAM Interface supports 18-bit address bus and 32-bit data bus. The UART provides RS232 protocol, which supports serial communication function. The Platform is design and verified on a Xilinx VERTEX-4 XC4VLX80 FPGA board. Test code is generated by a cross compiler' and JTAG utility software and gdb are used to download the test code to the FPGA board through parallel cable. Finally, the Platform is implemented into a single ASIC chip using Chatered 0.18um process and it can operate at 100MHz clock frequency.

• Journal of the Korea Computer Industry Society
• /
• v.5 no.8
• /
• pp.801-810
• /
• 2004

It is only 2 ~ 3 years in the interior to be introduced as a Ubiquitous era after going through mainframe, PC and internet era on account of the advent of computer. This thesis intends to present a model device of an epoch-making cash management system using the RFID(Radio Frequency Identification) Tag and EPC (Electronic Product Code) Platform which are core technologies of the Ubiquitous Computing on the assumption that cable and wireless internet is constructed in university. Also this sets up a purpose to minimize the administrative procedure as well as the waste of time, people and cost which are problems of the cash management system operating now. Therefore as a research project hereafter, it will be able to present an imporvement device about the problems which cannot solve these days through the model of the proposing cash management system when the standardization, normalization and commercialization of advanced IT department are accomplished.

• Structural Engineering and Mechanics
• /
• v.61 no.6
• /
• pp.785-794
• /
• 2017

This paper is concerned with the comparative numerical and experimental study on the natural behavior and the motion responses of a 1/75 moored scale model of a 2.5 MW spar-type floating offshore wind turbine subject to 1-D regular wave. Heave, pitch and surge motions and the mooring tensions are investigated and compared by numerical and experimental methods. The upper part of wind turbine which is composed of three rotor blades, hub and nacelle is modeled as a lumped mass and three mooring lines are pre-tensioned by means of linear springs. The numerical simulations are carried out by a coupled FEM-cable dynamics code, while the experiments are performed in a wave tank equipped with the specially-designed vision and data acquisition system. Using the both methods, the natural behavior and the motion responses in RAOs are compared and parametrically investigated to the fairlead position, the spring constant and the location of mass center of platform. It is confirmed, from the comparison, that both methods show a good agreement for all the test cases. And, it is observed that the mooring tension is influenced by all three parameters but the platform motion is dominated by the location of mass center. In addition, from the sensitivity analysis of RAOs, the coupling characteristic of platform motions and the sensitivities to the mooring parameters are investigated.

• Journal of KSNVE
• /
• v.9 no.3
• /
• pp.535-543
• /
• 1999

The seismic qualification of the structures has been great concern in our engineering society with an effort to reduce the severe damages from an earthquake. However, on the contrary to the importance of the seismic qualification, the whole procedures are used to rely on the advanced countries who require various expenses for the qualification, which leads to the heavy loss of the foreign currency. In this study, the nuclear air conditioning system produced by LG Cable are adopted for the seismic qualification based on the guideline of NUREG, IEEE and ASME code. In order to confirm the validity of the present study, the results from the Ellis & Watts are compared with the present results and, also, the seismic qualification procedures and results mentioned herein are approved by KOPEC, which is a naitonal surveillance institute for the construction of nuclear power plant. From these results, the author confirmed the validity of the present seismic qualification procedures and results, which might be usefully applied to the other kind of seismic qualification of equipments.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.41-44
• /
• 2013

As appearance of high-quality service such as UDTV application, high-speed and high-capacity communication services are required. For this, communication systems increase the data processing speed and use various error correction techniques. In this paper, we implement the Viterbi decoder applied in 1000BASE-T with 4 pairs UTP cable. The minimum operating speed of the Viterbi decoer should be more than 125 MHz because 125 MHz PAM-5 signal is transmitted on each pair of cables in 1000BASE-T. To do this, we implement the decoder by using the pipeline and parallel processing and verify the operation with 125 MHz by using a logic analyzer. Finally, we will show that the decoder recovers the original data for the added random error data.