• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.26 no.7
• /
• pp.77-83
• /
• 2012

Since power system is switching to smart grid, on-line monitoring technology has become necessary for underground distribution power cable. Therefore, the application of DTS(Distributed Temperature Sensing) technology using OFCPC(Optical Fiber Composite Power Cable) capable of monitoring underground distribution power cables has been developed. These can bring about reductions in faults and increases in operating capacity of underground distribution system. To date, the test-bed of optical fiber composite power cable on-line monitoring system has been constructed. Then, matters to be improved have been drawn through verification experiments. This paper presents the improvement and experiment results of the optical fiber composite power cable on-line monitoring system to apply to underground distribution lines in the field.

• Journal of Korea Technology Innovation Society
• /
• v.4 no.2
• /
• pp.157-171
• /
• 2001

This paper discusses the economics of local loop architecture focusing on existing technologies, ADSL, HFC, and new one, PLC, and suggests a new modeling approach of access network system and the numerical equations. To modelize access network system and drive the numerical equations, we consider the double star and the tree & branch architecture and made block diagram of each access system. In addition, we introduce the density of subscriber as a variable and the equation of seeking the optimal number of cell in a service area. The economics of local loop architecture is analyzed in two ways, i.e. with and without consideration of the cost of cable and infrastructure. From the numerical analysis, we find that in case of not including the cost of cable and infrastructure, there is no much difference in the cost per one subscriber, while, in case of including it, there is remarkable difference among technologies. Therefore we conclude that the economics of local loop architecture is depend on the density of subscriber and existing network infrastructures.

• Proceedings of the KIEE Conference
• /
• 1998.07g
• /
• pp.2464-2466
• /
• 1998

A switch is a component with two or more ports that selectively transmits, redirects, or blocks optical power in a fiber transmission line. Our switch uses rotation mechanism using stepping motor, hence the common optical fiber can scan and allign to one of the arrayed N optical fibers to provide optical path by electronic precise control. The developed switch is consisted of switching module and its control module. The performance parameters of a switching loss and a repeatability are considered very important. We performed the study to reduce the switching loss and improve the repeatability of switch. The switch can be widely used as a test instrument of optical device and of optical cable in factory, also of optical cable monitoring systems.

• Journal of Korea Multimedia Society
• /
• v.7 no.2
• /
• pp.283-291
• /
• 2004

Internet Service Subscribers Network has a new role of providing the various multimedia services to the home. However, there exist several types of distributed subscribers network using Asymmetric Digital Subscriber Line (ADSL), Very high-bit rate Digital Subscriber Line (VDSL), and Data Over Cable Service Interface Specifications (DOCSIS). The efficient and concentrated network management of those several distributed subscribers networks with resources require the general information model of network, which has abstract and conceptional managed objects independent of type of network and its equipment to manage the integrated subscriber network. This paper presents the general Internet subscribers network model of the managed object to manage that network in the form of integrated hierarchy This paper adopts the object-oriented development methodology with UML and designs and implements the integrated subscribers NMS of cable data network and VDSL network as examples of the subscriber networks.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.1
• /
• pp.27-32
• /
• 2008

In the signals-shadowed areas, In order to providing the suitable signals reception level repeaters are used for relay the signals. Repeater receives the weak signals and amplifies it up to required power level, The amplified signals get radiated by the various methods. Both antenna distribution and LCX(Leakage Coaxial Cable) are typical methods in the repeater and BTS signals radiation. Their applications are depended on the environment condition and frequency band. Generally the antenna distribution are used for the mobile telecommunication networks which use the higher frequency band than 500MHz. On the other side, LCX distribution is suitable to the frequency band under 500MHz. The network plan of repeater in FM, T-DMB, Fire Radio and Internal subway communication network are the typical LCX application fields. Cell planning with repeaters are based on the free space loss, LCX connection loss and actual field data. The actual field data can be the most important factor to design the network planning.

• Proceedings of the IEEK Conference
• /
• 2007.07a
• /
• pp.53-54
• /
• 2007

As Cable Network is developing for 2-way high speed data service, it should be developed to transfer high speed data using limited bandwidth. If QAM is using for this, synchronization algorithms become important system parameters. In this paper, we present two methods of coarse timing recovery using CAZAC sequence for cable modem uplink.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.3 no.1
• /
• pp.1-7
• /
• 2008

Submarine cable is the most important IT infrastructure for international communication across oceans. However, a cable fault rarely happens by ship's anchor, fishing gears, submarine earthquake, and so on, and we need to improve on repair time for the reducing expenses of cable repair ship as well as the stability of high-capacity submarine optical network. There are several kinds of cable faults such as Shunt fault, Cable cut, Open fault and Fiber break. When a fault is occurred, cable landing stations(CLS) have to analysis failure quickly and accurately to find the type and the location of a cable fault. During the repair period, CLS should swiftly perform the tests requested by cable repair ship. In order to make rapid progress on cable repair, CLS test technique is very important. So, in order to reduce the repair time, this paper is studying the CLS test techniques of locating a submarine cable fault and of checking the splicing point performed by cable repair ship.

• Proceedings of the KIEE Conference
• /
• 2008.05a
• /
• pp.145-146
• /
• 2008

초고압 케이블에서 발생하는 부분방전을 측정하기 위해 다양한 방법들이 연구 개발되어왔다. 최근에는 초고압 케이블의 설치 후 시행하는 준공시험에 있어 부분방전 측정을 필수적으로 할 만큼 부분방전 진단기술의 중요성이 부각되고 있는 실정이며, 디지털 측정기술을 통한 부분방전자동측정 기술이 많이 제안되고 있다. 특히, 비전문가들만으로도 진단 및 감시가 가능하도록 하는 자동 패턴 분류에 대한 다양한 연구에 활발히 보고되고 있다. 본 논문에서는 초고압 케이블에서 발생되는 결함을 내부, 외부, 노이즈의 세 가지로 분류하고 PRPD(Phase Resolved Partial Discharge) 형태로 모의된 실험데이터와 현장에서 축적된 데이터를 선별하여 다양한 통계치를 추출하였고, 결함별 구분이 용이하지 않은 통계치를 제외한 값들을 Neural Network 방법으로 학습시켰다. 학습된 가중치 값을 LabView로 작성된 프로그램에 사용하여 변전소 내 EBG에서 검출한 부분방전 측정 결과에 적용하였다.

• Journal of Power System Engineering
• /
• v.11 no.1
• /
• pp.28-32
• /
• 2007

This research proposed that development of wireless condition monitoring system using WLAN network. It offers the prospect of improved performance that removed a current a coaxial cable and reduced overall cost of condition monitoring. Recently, there is an interesting concern for wireless system as an infrastructure technology construct ubiquitous computing environment in the future. High performance computing board makes minimization with integrate of a various functions which support wireless LAN network. Instead of wired coaxial cable using measurement system in industry, wireless LAN network assists industry automation and engineer's convenience. Developed system adapted wireless LAN network on shipboard with engine room and deck house, it also executes wireless measurement test on 8500TEU containership.

• 한국정보통신설비학회:학술대회논문집
• /
• 2007.08a
• /
• pp.331-335
• /
• 2007

방송과 초고속인터넷 서비스를 동시에 제공할 수 있는 HFC(Hybrid Fiber Coaxial) 망은 상/하향이 비대칭 구조이며, 하향속도에 비해 상향속도가 1/10 수준이어서 상향 트래픽이 과다하게 생성될 경우 인터넷속도 지연이 발생한다. 지연에 민감한 VoIP 서비스의 품질보장 방안으로는, DOCSIS(Data Over Cable System Interface Specification) 1.1 기반의 상향 스케쥴링 기능을 이 용한 VoCM(Voice Over Cable Modem)이 있다. 그러나 별도의 VoCM을 사용해야 하며 아날로그 전화기를 사용해 IP 기반의 VoIP 단말을 사용할 수 없다는 단점이 있다. 일반 CM(Cable Modem)에 DOCSIS 1.1 Config File을 이용하여 VoIP 품질을 보장할 경우 별도의 트래픽 대역을 항상 점유해야 하는 단점이 있다. 이에, 본 논문에서는 효율적 대역폭 이용과 단말장비에 종속적이지 않은 방안을 제안하고 일반 CM을 통한 유무선 환경하에서 Dynamic QoS(Quality Of Service)를 제공할 수 있는 PCMM(Packet Cable MultiMedia) 적용 방안 및 시험결과에 대해 고찰하고자 한다.