• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.959-965
• /
• 2009

To meet the demand increasing passengers in railway vehicles, railway transportation service companies are increasing the numbers of cars per train-set. Two solutions, Variable train-set formations and Multiple train-set operation, are common way to increase the transportation capability. These kind of long distance train-set can effect train-set command and control system, and sometimes the digital signals using train line from master cabin can not reach to the systems located the other extremity slave car. This is so called Voltage Drop. This phenomenon is originated from the electrical power consumption and electrical cable resistance, and cause to the equipments or cars located end of the electrical cable way, malfunction or abnormal operations. This voltage drop happens not only in train lines but also Battery Power Lines. The purpose of this investigation is to design high reliability railway vehicles by clarifying the possibility of happening these events case by case, by analyzing the reasons, and finally by finding the best solutions.

• 한국자동차공학회논문집
• /
• 제9권3호
• /
• pp.201-209
• /
• 2001

Some passenger cars with sunroofs open at tilted positions experience reverse flows into cabin rooms and wind noises much louder compared to other cars. In this study, flows around open sunroofs are numerically studied with the variations of body leakage. The effects of body leakage on ventilation and wind noise of a sun roof are examined, in particular. Furthermore, flow visualization, pressure, and noise measured from wind tunnel and road tests are presented. The results show that too small body leakage results in poor performance of ventilation and generates high wind noise around a sunroof. It is therefore very important to secure an adequate body leakage from the early design stage to achieve better performance of a sunroof as well as passengers' comfort related to HVAC(Heating, Ventilation, and Airconditioning).

• International Journal of Ocean Engineering and Technology Speciallssue:Selected Papers
• /
• 제3권1호
• /
• pp.56-62
• /
• 2000

The trends of recent passenger ships are becoming speedy and luxury style to enhance comfortableness in cabin. In order to meet these trend, ship designer has to improve the sound quality as well as to reduce the sound pressure level in cabins. In this paper, the trend of noise and sound quality of real high-speed coastal passenger ships are measured and analyzed, while running on their regular courses. The sound quality parameters such as loudness, roughness, fluctuation strength, and sharpness are evaluated by Zwicker loudness calculation. In addition, we try to find sensitive critical frequency band for the improving sound quality by using signal editing. Finally, the expected effective design methods are proposed to designer for the improving sound quality of passenger ships.

• 한국연소학회지
• /
• 제16권2호
• /
• pp.40-46
• /
• 2011

The diesel pre-heater has being used in cabin heating and coolant heating of engine to reduce the engine warm up time for commercial vehicle. The pre-heaters are classified as diesel spray combustor and it forms diffusion flame. By using swirler, a recirculation flow of hot product gases is established near the fuel nozzle and it helps the maintaining of diffusion flame. The design difference of swirler can affect on reaction characteristics and temperature distribution inside pre-heater. The purpose of this study is the investigation of the effect of swirler configuration on combustion characteristics. To solve spray combustion problem, the Euler-Lagrange approach discrete model is used to track droplet trajectory and evaporation history. The PDF equilibrium model is used for chemical reaction model. These models are implemented into the FLUENT code.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 II
• /
• pp.1093-1098
• /
• 2001

The interior sound pressure level of the Korean high speed train is predicted using ray acoustic method. The motor car, motorized car and passenger cabin are investigated under the environment of passing open countryside and inside tunnel Calculated sound levels of KHST are compared with the those of KTX prototype which vehicle shows similar acoustic behavior with KHST for the purpose of assuring the calculated data. In order to reduce the calculated SPL in systematic way, contribution analysis of sound sources and sensitivity analysis of concerning wall's transmission loss on the SPL of the designated receiving points are carried out. Finally, practical design suggestions are proposed.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2015년도 추계학술발표대회
• /
• pp.1842-1843
• /
• 2015

심해 유인 잠수정과 같은 제한된 공간 내에서 다수의 작업자가 장시간 거주하며 작업을 수행하기 위해서는 거주구 관측창 위치 및 기타 운영설비 배치에 있어 인체공학적 설계가 고려되어야 한다. 본 논문에서는 구조안전성 평가와 최적설계로 도출된 심해 유인 잠수정의 내압구조 셀 설계안을 대상으로 거주구 관측창 배치를 위한 인체공학적 설계 검토에 대하여 소개한다. 관측창 배치는 작업자 선내 위치, 관측 시야 확보, 편안하고 안전한 작업 여부 등의 다양한 요인과 함께 구조 안전성과 제작성 등이 동시에 고려되어야 한다. 국외 심해 잠수정 개발에서 적용된 인체공학적 설계 관련연구를 소개하고 디지털 휴먼 모델링 S/W인 Santos Engine을 활용한 인체공학적 설계 검토에 대하여 소개한다.

• 한국유체기계학회 논문집
• /
• 제17권5호
• /
• pp.54-59
• /
• 2014

The new high speed combi train prototype project was developed which named HSB. It runs over the speed of 330km/h. As the speed of the train exceeds over 300km/h, due to pressure change in tunnel, aerodynamic problems such as sudden drag increase, severe acoustic noise, passenger discomfort and tunnel pressure sonic boom were occurred. This aerodynamic characteristics in tunnel should be reviewed in early design state to enhance the performance and driving quality of new high speed train. In this paper, the aerodynamic characteristics in tunnel for HSB such as pressure waves in tunnel, a rate of pressure change in cabin and micro pressure wave that cause sonic boom outside tunnel are analyzed by 2D axisymmetric CFD simulations. The results are also compared with the value for ordinary high speed train like the KTX-Sancheon. It is helpful how to design the configuration of HSB train. Finally it shows that the HSB train was well designed in tunnel condition because all values fulfill the criterions on UIC code and Korean national regulations.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.1227-1232
• /
• 2008

High-speed train of push-pull type called as G7 train has been developed and chosen as the model of KTX-II which will be operated on Honam Line nexr year. However, the EMU-type high-speed train appeared to be the recent trend that foreign markets have shown. Also, in the near future, a great number of new train sets are needed to accommodate the increased passengers in our country. Thus, development of the high-speed EMU was decided, planned, and started. In the development, included were almost all fundamental key technologies such as noise and vibration reduction in a passenger cabin, running characteristics, aerodynamic analysis, crashworthiness evaluation, EMI/EMC analysis, design of the cooling system for the propulsion control system, enhanced performance of transformer and switching converters, synchronous traction motor with permanent magnets, new design of front nose and ergonomic interiors, application of advanced information technology(IT) and smart sensors and the cost reduction of construction of railway bridges, etc. Each key technologies are carried out as sub-project independently but under the supervision of a project. The project will develop the high advanced level of technologies and provide necessary know-why's and support the team in charge of the development of the high-speed EMU, Hyundai Rotem Co. Ltd. The high-speed EMU will be successfully developed with the support of the project.

• 한국기계가공학회지
• /
• 제18권7호
• /
• pp.14-21
• /
• 2019

Large-diameter hydraulic devices such as the hydraulic reservoir in aircraft that serves to balance the hydraulic pressure in the various hydraulic devices in the cabin and to store hydraulic oil are operated by the internal piston systems. However, since this operates in an environment with high temperature and humidity, it may cause the inner surface to flake during its operation. Therefore, an anodizing surface treatment is applied to improve the corrosion resistance, abrasion resistance, and smooth operation. However, anodizing increases the surface roughness. Accordingly, the polishing process that improves the surface roughness after anodizing is important. However, the existing polishing process is performed manually, which results in an inefficient process. Therefore, in this study, we selected the optimum polishing conditions for effective polishing using the experimental design to improve the polishing process for the $Al_2O_3$ film that forms after anodization. Through experiments, we confirmed that the surface uniformity after polishing was superior as the feed rate was slower when the same polishing time had been applied.

• 디자인학연구
• /
• 제15권4호
• /
• pp.409-416
• /
• 2002

자동차에서 실내공간 비중의 점진적 증대는 오늘에 이르러 자동차 차체 디자인의 조형개념에서 새로운 전환점을 제공하고 있으며, 이것은 차량의 차체 크기나 엔진의 배기량에 관계없이 차체에서 승객을 위한 실내 공간을 형성하는 캐빈(cabin)의 크기가 가장 높은 비중을 가지게 되는 것을 전제로 한다. 이에 따라 차체에서 실내공간을 이루는 캐빈의 비례는 차체의 다른 부분의 비례와 함께 변화되고 있다. 캐빈 이외의 공간은 차량을 구성하는 기구적 요소들을 위한 공간과 화물 수송 목적의 공간이다. 캐빈의 비례가 변화된다는 것은 종합적으로 탑승자의 공간 비중과 기구적 요소의 비례 관계가 변화됨을 의미하는 것이며, 이것은 결과적으로 차체에서의 공간개념의 변화를 초래하게 되었다. 이러한 변화로 인하여 현재의 차량은 과거의 차량에서 단순한 외형적 스타일만이 변화되는 것이 아니라, 공간 확보를 위한 차체의 구조와 형태가 차량의 운전공간과 탑승공간의 확보를 위해 변화되고 있으며, 이것은 향후의 차체 스타일에서 새로운 변화로써 나타나게될 것으로 보인다.