1 |
Kim, J. S., "The Effect of Temperature and Humidity on the Pressure of the Bootstrap Reservoir in the Aircraft," MS Thesis, Gyeongsang National University, Republic of Korea, 2012.
|
2 |
Aaltonen, J., Koskinen, K. T., Vilenius, M., Vaaraniemi, K., "Pump Supply Pressure Fluctuations in the Semi-closed Hydraulic Circuit with Bootstrap Type Reservoir," Proceeding of Scandinavian International Conference on Fluid Power, pp. 117-133, 2007.
|
3 |
Tao, L., "Study on bootstrap reservoir type pressurized system for civil aircraft hydraulic supply system," Proceeding of 2016 IEEE International Conference on Aircraft Utility Systems, pp. 1117-1121, 2016.
|
4 |
Kim, W. B., "A Study on Improvement of Manufacturing Process for Airplane Reservoir of Al7075," MS Thesis, Changwon National University, Republic of Korea, 2016.
|
5 |
Seong, C. H., “Characteristics of Surface Roughness in the High Speed Micro Turning of Aluminum Alloy,” Journal of the Korean Society of Precision Engineering, Vol. 16, No. 7, pp. 94-100, 1999.
|
6 |
Jun, J. U., Jung, J. S., Ha, M. K., “Influence of Surface Roughness by Feed-rate and Side-rake Angle at Turning of Non-ferrous Metals,” Journal of the Korean Society of Manufacturing Technology Engineering, Vol. 10, No. 4, pp. 1-6, 2001.
|
7 |
Nalbant, M., Gokkaya, H., Sur, G., "Application of Taguchi method in the optimization of Cutting Parameters for Surface Roughness in Turning," Materials & Design, Vol. 28, 1379-1385, 2007.
DOI
|
8 |
Asilturk, I., Akkus, H., "Determining the Effect of Cutting Parameters on Surface Roughness in Hard Turning using the Taguchi Method," Measurement, Vol. 44, 1697-1704, 2011.
DOI
|
9 |
Thamizhmanii, S., Saparudin, S., Hasan, S., "Analysis of Surface Roughness by Turning Process using Taguchi Method," Journal of Achievements in Materials and Manufacturing Engineering, Vol. 20, pp.503-506, 2007.
|
10 |
Nimase, R. N., Khodke, P. M., "Effect of Machining Parameters on Surface Roughness of Al-7075 Alloy in End Milling," International Research Journal of Engineering and Technology, Vol. 2, pp.1505-1508, 2015.
|
11 |
Ferreira, S. L. C., Bruns, R. E., Ferreira, H. S., Matos, G. D., David, J. M., Brandao, G. C., da Silva, E. G. P., Portugal, L. A., dos Reis., P. S., Souza, A. S., dos Santos, W. N. L., "Box-behnken design: An Alternative for the Optimization of Analytical Methods," Analytica Chimica Acta, Vol. 597, 179-186, 2007.
DOI
|
12 |
Li, M., Feng, C., Zhang, Z., Chen, R., Xue, Q., Gao, C., Sugiura, N., "Optimization of Process Parameters for Electrochemical Nitrate Removal using Box-Behnken Design" Electrochimica Acta, Vol. 56, pp.265-270, 2010.
DOI
|
13 |
Manohar, M., Joseph, J., Selvaraj, T., Sivakumar, D., "Application of Box Behnken Design to Optimize the Parameters for Turning Inconel 718 using Coated Carbide Tools," International Journal of Scientific & Engineering Research, Vol. 4, No. 4, pp.620-642, 2013.
|
14 |
Kilickap, E., "Modeling and Optimization of Burr Height in Drilling of Al-7075 using Taguchi Method and Response Surface Methodology," The International Journal of Advanced Manufacturing Technology, Vol. 49, pp.911-923, 2010.
DOI
|