• Journal of the Korea Concrete Institute
• /
• v.29 no.1
• /
• pp.65-75
• /
• 2017

C-S-H phase is the most abundant reaction product, occupying about 50~60% of cement paste volume. The phase is also responsible for most of engineering properties of cement paste. This is not because it is intrinsically strong or stable, but because it forms a continuous layer that binds together the original cement particles into a cohesive whole. The binding ability of C-S-H phase arises from its nanometer-level structure. In terms of chloride penetration in concrete, C-S-H phase is known to adsorb chloride ions, however, its mechanism is very complicated and still not clear. The purpose of this study is to examine the interaction between chloride ions and C-S-H phase with various Ca/Si ratios and identify the adsorption mechanism. C-S-H phase can absorb chloride ions with 3 steps. In the C-S-H phase with low Ca/Si ratios, momentary physical adsorption could not be expected. Physical adsorption is strongly dependent on electro-kinetic interaction between surface area of C-S-H phase and chloride ions. For C-S-H phase with high Ca/Si ratio, electrical kinetic interaction was strongly activated and the amount of surface complexation increased. However, chemical adsorption could not be activated for C-S-H phase with high Ca/Si ratio. The reason can be explained in such a speculation that chloride ions cannot be penetrated and adsorbed chemically. Thus, the maximum chloride adsorption capacity was obtained from the C-S-H phase with a 1.50 Ca/Si ratio.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.1
• /
• pp.29-36
• /
• 2019

This study investigated the self-healing properties of blast furnace slag cement paste sample with $Na_2SO_4$ as a blast furnace slag activator after conducting the permeability test. Self-healing properties were examined by crack filling ratio and quantification of self-healing products. The degree of self-healing was evaluated by the crack filling ratio, and the crack filling ratio was analyzed by panoramic analysis using BSE-DIP for objectivity. The average crack filling ratio showed a tendency of decreasing from the upper part of the specimen to the lower part as the average of the top part was 18%, the middle part was 7% and the bottom part was 5% on average. The maximum crack filling ratio was 44% and the minimum crack filling ratio was 3%. The residual self-healing product after the permeability test contained a large amount of Ca element and Al element derived from the blast furnace slag, and the Si element was mainly present near the crack surface. The most abundant minerals in self-healing products were about 68% C-A-H. $CaCO_3$ was about 13% and C-A-S-H was about 8%. Three minerals accounted for 90% of self-healing products. C-A-H was mainly present at a part slightly distant from the crack surface and showed an angular or acicular shape. The C-A-S-H was generated on the surface naturally connected to the existing specimen, and the $CaCO_3$ was generally observed on the surface of the specimen or the inside of the crack.

• Journal of environmental and Sanitary engineering
• /
• v.24 no.3
• /
• pp.55-61
• /
• 2009

Fe-V is used as raw material of vanadium in the steel making process. The purpose of this study, Fe-V is to replace the $VO_{4}$. So the distribution behavior of vanadium in $VO_{4}$ of the steel investigated. The distribution ratio of the vanadium where potential of the free oxygen ion will increase in slag decreased. When CaO and MgO content which is a basic oxide from CaO-$SiO_2$-FetO-MgOsatd. slag increases, S distribution ratio increases. CaO-$SiO_2$-FetO-MgOsatd. slag better than CaO-$SiO_2$-$Al_2O_3$-MgO slag is the recovery of vanadum and desulfurization.

• Bulletin of the Korean Chemical Society
• /
• v.18 no.11
• /
• pp.1172-1175
• /
• 1997

Calcium isotopic ratios are precisely measured by removing isobaric interferences originated from water in the plasma. Liquid Ar cryogenic trap combined with membrane desolvator could eliminate backgrounds at m/z 42 and 44. Slow drift of ICP-MS is corrected by the frequent running of the standards. It is found necessary to separate Ca from the sample matrix using Ca oxalate precipitation technique. Currently, the RSD is 0.5-1.0% for 2 minutes of measurement but is expected to be improved if the measurement time is increased. The technique was applied to 42Ca enriched baby fecal samples and successfully determined 42Ca/44Ca ratio changes.

• The Korean Journal of Physiology and Pharmacology
• /
• v.9 no.1
• /
• pp.29-35
• /
• 2005

To prove the buffering contribution of mitochondria to the increase of intracellular $Ca^{2+}$ level ($[Ca^{2+}]_i$) via background nonselective cation channel (background NSCC), we examined whether inhibition of mitochondria by protonophore carbonylcyanide m-chlorophenylhydrazone (CCCP) affects endothelial $Ca^{2+}$ entry and $Ca^{2+}$ buffering in freshly isolated rabbit aortic endothelial cells (RAECs). The ratio of fluorescence by fura-2 AM ($R_{340/380}$) was measured in RAECs. Biological state was checked by application of acetylcholine (ACh) and ACh ($10{\mu}M$) increased $R_{340/380}$ by $1.1{\pm}0.15$ ($mean{\pm}S.E.$, n=6). When the external $Na^+$ was totally replaced by $NMDG^+$, $R_{340/380}$ was increased by $1.19{\pm}0.17$ in a reversible manner (n=27). $NMDG^+$-induced $[Ca^{2+}]_i$ increase was followed by oscillatory decay after $[Ca^{2+}]_i$ reached the peak level. The increase of $[Ca^{2+}]_i$ by $NMDG^+$ was completely suppressed by replacement with $Cs^+$. When $1{\mu}M$ CCCP was applied to bath solution, the ratio of $[Ca^{2+}]_i$ was increased by $0.4{\pm}0.06$ (n=31). When $1{\mu}M$ CCCP was used for pretreatment before application of $NMDG^+$, oscillatory decay of $[Ca^{2+}]_i$ by $NMDG^+$ was significantly inhibited compared to the control (p＜0.05). In addition, $NMDG^+-induced$ increase of $[Ca^{2+}]_i$ was highly enhanced by pretreatment with $2{\mu}M$ CCCP by $320{\pm}93.7$%, compared to the control ($mean{\pm}S.E.$, n=12). From these results, it is concluded that mitochondria might have buffering contribution to the $[Ca^{2+}]_i$ increase through regulation of the background NSCC in RAECs.

• Journal of Korean Society for Atmospheric Environment
• /
• v.20 no.4
• /
• pp.429-436
• /
• 2004

Circulating fluidized bed combustion (hereafter CFBC) technology enables an efficient combustion for the materials with low heating values such as high ash coal and sludges. It also has desulfation function by adding limestone directly to combustor. The CFBC has been considered as one of the best processes for low grade coal containing with large contents of ash and sulfur. In this paper, in order to various tests were performed to find the optimum desulfation condition for CFBC using Korean Anthracite. We surveyed possible parameters and conducted desulfation efficiency test in D Thermal Power Plant. In addition, the result of some fundamental theoretical consideration was discussed with CFBC. Optimum limestone size could be considered to be 0.1-0.3mm irrespective of combustion temperature and Ca/S molar ratio variation. Desulfation efficiency increased as the molar ratio increased. Because desulfation process occurs at the surface at higher temperature, inner side of limestone can＇t be utilized. When surface area is not appropriate, some SO$_2$ emit without reaction. Optimum molar ratio should be decided after considering chemical and physical properties of limestone and coal thoroughly such as particle size, pore size and HGI. Commercial CFBC is operated at Ca/S 1.6. Combustor temperature 840-87$0^{\circ}C$ shows good desulfation efficiency.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.16
• /
• pp.6881-6885
• /
• 2014

Background: The present study aimed to investigate the utility and importance of the various parameters of complete blood count panel for benign-malignant differentiation of adnexal masses. Materials and Methods: This retrospective study involved 316 patients with documented benign and 253 patients with malignant adnexal masses who underwent primary surgical treatment at a tertiary referral center. Prior to the study, all benign and malignant cases were compared within their own groups and then the benign and malignant cases were compared to each other. For all cases, cut-off, sensitivity, specificity, positive predictive value (PPV) and negative predictive value (NPV) were calculated for the neutrophil lymphocyte ratio (NLR), platelet lymphocyte ratio (PLR), neutrophil, lymphocyte, platelet and CA-125 parameters, and the results were compared in regards to the groups. Results: NLR, PLR, neutrophil, CA-125, and platelet values were higher in the malignant compared to the benign cases (p<0.01). The lymphocyte value was lower in the malignant cases (p<0.01). No significant differences were found for basophils and eosinophils (p > 0.05). For CA-125, the sensitivity, specificity, PPV and NPV for all cases were 78%, 62%, 62% and 78%, respectively. For NLR, they were 65.6%, 72.1%, 65.3%, and 72.3%, and for PLR, 48%, 81%, 67%, and 66%. Additionally, the sensitivity and specificity were 55% and 77% for CA-125, 66% and 58% for NLR, and 61% and 58% for PLR in early malignant cases. Conclusions: NLR and PLR appear to be useful methods that can be applied together with CA-125 due to the relatively high sensitivity values for the malign-benign differentiation of ovarian masses. Although the specificity of these parameters is lower than CA-125, especially in cases with early malignant ovarian pathology, their sensitivity being higher is promising for the early diagnosis of ovarian cancer. It can be used to detect ovarian malignancies in the early stages, and it will increase the treatment options and improve survival rates.

• Journal of Bio-Environment Control
• /
• v.12 no.4
• /
• pp.240-244
• /
• 2003

The purpose of this study was to investigate a proper $Ca^{2+}\;:\;K^+$ ratio in nutrient solution to produce marjoram and oregano by hydroponics. Two herbs were grown for 40 days with the $Ca^{2+}\;:\;K^+$ ratio of 3.5;13, 4.5:11(standard herb's nutrient solution), 5.5:9 and 6.5:7mM${\cdot}L^{-1}$ of herb's nutrient solution developed by European Vegetable R &D Center, Belgium. The ratio of 5.5:9, and 6.5:7 mM${\cdot}L^{-1}$ showed better results in growth of marjoram than other treatments. Vitamin C contents and amounts of esential oil were the highest in the ratio of 5.5:9 and 6.5:7, respectively. Inoregano, the growth and vitamin C contents were the highest in the ratio of 5.5:9 and 6.5:7 mM${\cdot}L^{-1}$, respectively. The content (%) and amount (mg/plant) of essential oil were the highest in the ratio of 6.5:7mM${\cdot}L^{-1}$. These results indicated that 5.5:9 and 6.5:7 mM${\cdot}L^{-1}$were proper $Ca^{2+}\;:\;K^+$ ratio of nutrient solution of marjoram and oregano, respectively, by hydropoinics.

• 한국연소학회:학술대회논문집
• /
• 2012.11a
• /
• pp.43-45
• /
• 2012

The effect of limestone characteristics on in-furnace desulfurization was experimentally investigated at hot gas combustion condition in a drop tube furnace (DTF). Flue gas was measured by Gas analyzer in order to figure out $SO_2$ content. The experiments were performed under excess sulfur 3000ppm condition to examine the effect of operating variables such as reaction temperatures, Ca/S ratios on the $SO_2$ removal efficiencies. The results show that the $SO_2$ removal efficiency increased with reaction temperature and Ca/S ratio increase. When considering the economics, $1200^{\circ}C$ and Ca/S ratio 2 condition is optimized to reduce $SO_2$ emission.

• The Journal of Natural Sciences
• /
• v.8 no.1
• /
• pp.47-51
• /
• 1995

Several intermediate glasses are investigated to bond the alumina and the hydroxyapatite (HAp). The chemical compositions of the intermediate glasses are chosen as $CaO-Al_2O_3$. The mole ratio of CaO/$Al_2O_3$ is changed from 0.5 to 3.0. The lowest melting is observed at $1355^{\circ}C$ in the specimen of CaO/$Al_2O_3$ at the mole ratio of 2. With increasing contents of $Al_2O_3$, the melting temperatures gradually increase and a number of pores are observed. The sectional microstructure shows that the good wetability is observed in higher contents of CaO specimens. This implies that the good wetability is obtained in the mole ratio range of CaO/$Al_2O_3geq2$. The phase transformations are observed after treatment but the major peaks of HAp still exist.