• 제목/요약/키워드: CVD growth

검색결과 374건 처리시간 0.024초

탄소나노튜브 성장 실험실에서 CVD 밀폐 여부에 따른 공기 중 나노입자 농도 비교 (Comparison of Airborne Nanoparticle Concentrations between Carbon Nanotubes Growth Laboratories based on Containment of CVD)

  • 하주현;신용철
    • 한국산업보건학회지
    • /
    • 제20권3호
    • /
    • pp.184-191
    • /
    • 2010
  • Although the usage of nanomaterials including carbon nanotubes (CNTs) has increased in various fields, scientific researches on workers' exposures and controls of these materials are very limited. The purpose of this study was to compare the airborne nanoparticles concentrations from two university laboratories conducting experiments of CNTs growth based on containment of thermal chemical vapor deposition (CVD). Airborne nanoparticle concentrations in three metrics (surface area concentration, particle number concentration, and mass concentrations) were measured by task using three direct reading instruments. In a laboratory where CVD was not contained, the surface area concentration, number concentration and mass(PM$_1$) concentration of airborne nanoparticles were 1.5 to 3.5 times higher than those in the other laboratory where CVD was confined. The ratio of PM$_1$ concentration to total suspended particles(TSP) in the laboratory where CVD was not confined was about 4 times higher than that in the other laboratory. This indicates that CVD is a major source of airbone nanoparticles in the CNTs growth laboratories. In conclusion, researchers performing CNTs growth experiments in these laboratories were exposed to airborne nanoparticles levels higher than background levels, and their exposures in a laboratory with the unconfined CVD were higher than those in the other laboratory with the confined CVD. It is recommended that in the CNTs growth laboratories adequate controls including containment of CVD be implemented for minimizing researchers' exposures to airborne nanoparticles.

가속기 백색광 X-Ray Topography를 이용한 CVD 단결정 다이아몬드 내부 전위 분석 (Dislocation Analysis of CVD Single Crystal Diamond Using Synchrotron White Beam X-Ray Topography)

  • 유영재;정성민;배시영
    • 한국전기전자재료학회논문지
    • /
    • 제32권3호
    • /
    • pp.192-195
    • /
    • 2019
  • Single-crystal diamond obtained by chemical vapor deposition (CVD) exhibits great potential for use in next-generation power devices. Low defect density is required for the use of such power devices in high-power operations; however, plastic deformation and lattice strain increase the dislocation density during diamond growth by CVD. Therefore, characterization of the dislocations in CVD diamond is essential to ensure the growth of high-quality diamond. In this work, we analyze the characteristics of the dislocations in CVD diamond through synchrotron white beam X-ray topography. In estimate, many threading edge dislocations and five mixed dislocations were identified over the whole surface.

Theory of Charged Clusters Linking Nano Science and Technology to Thin Films

  • Hwang, Nong-Moon
    • 한국결정학회:학술대회논문집
    • /
    • 한국결정학회 2002년도 정기총회 및 추계학술연구발표회
    • /
    • pp.20-20
    • /
    • 2002
  • Based on experimental and theoretical analyses, we suggested a new possibility that the CVD diamond films grow not by the atomic unit but by the charged clusters containing a few hundreds of carbon atoms, which form spontaneously in the gas phase [J. Crysta] Growth 62 (1996) 55]. These hypothetical negatively-charged clusters were experimentally confirmed under a typical hot-filament diamond CVD process. Thin film growth by charged clusters or gas phase colloids of a few nanometers was also confirmed in Si and ZrO₂ CVD and appears to be general in many other CVD processes. Many puzzling phenomena in the CVD process such as selective deposition and nanowire growth could be explained by the deposition behavior of charged clusters. Charged clusters were shown to generate and contribute at least partially to the film deposition by thermal evaporation. Origin of charging at the relatively low temperature was explained by the surface ionization described by Saha-Langmuir equation. The hot surface with a high work function favors positive charging of clusters while that of a low work function favors negative charging.

  • PDF

Application of thermodynamics to chemical vapor deposition

  • Latifa Gueroudji;Hwang, Nong-Moon
    • 한국결정성장학회:학술대회논문집
    • /
    • 한국결정성장학회 1998년도 PROCEEDINGS OF THE 15TH KACG TECHNICAL MEETING-PACIFIC RIM 3 SATELLITE SYMPOSIUM SESSION 4, HOTEL HYUNDAI, KYONGJU, SEPTEMBER 20-23, 1998
    • /
    • pp.1-20
    • /
    • 1998
  • Processing of thin films by chemical vapor deposition (CVD) is accompanied by chemical reactions, in which the rigorous kinetic analysis is difficult to achieve. In these conditions, thermodynamic calculation leads to better understanding of the CVD process and helps to optimise the experimental parameters to obtain a desired product. A CVD phase diagram has been used as guide lines for the process. By determining the effect of each process variable on the driving force for deposition, the thermodynamic limit for the substrate temperature that diamond can deposit is calculated in the C-H system by assuming that the limit is defined by the CVD diamond phase diagram. The addition of iso-supersaturation ratio lines to the CVD phase diagram in the Si-Cl-H system provides additional information about the effects of CVD process variables.

  • PDF

Recent Progresses in the Growth of Two-dimensional Transition Metal Dichalcogenides

  • Jung, Yeonjoon;Ji, Eunji;Capasso, Andrea;Lee, Gwan-Hyoung
    • 한국세라믹학회지
    • /
    • 제56권1호
    • /
    • pp.24-36
    • /
    • 2019
  • Recently, considerable progress and many breakthroughs have been achieved in the growth of two-dimensional materials, especially transition metal dichalcogenides (TMDCs), which attract significant attention owing to their unique properties originating from their atomically thin layered structure. Chemical vapor deposition (CVD) has shown great promise to fabricate large-scale and high-quality TMDC films with exceptional electronic and optical properties. However, the scalable growth of high-quality TMDCs by CVD is yet to meet industrial criteria. Therefore, growth mechanisms should be unveiled for a deeper understanding and further improvement of growth methods are required. This review summarizes the recent progress in the growth methods of TMDCs through CVD and other modified approaches to gain insights into the growth of large-scale and high-quality TMDCs.

화학증착법에 의한 티타늄 피복된 고속도강에의 다이아몬드 박막 형성 (The formation of diamond films on high speed steel with a titanium inter- layer by electron-assisted CVD process)

  • 정연진;이건영;이호진;최진일
    • 한국결정성장학회지
    • /
    • 제14권1호
    • /
    • pp.6-11
    • /
    • 2004
  • Bias 인가된 hot filament CVD 방법을 이용해 티타늄을 RF sputtering 법으로 고속도강에 피복하여 중간 층으로 한 후 다이아몬드 박막을 피복할 때 bias 전압의 영향과 계면 층의 특성을 조사하였다. 다이아몬드 증착 시 bias가 인가될 경우 필라멘트에서 전자 방출이 촉진되어 다이아몬드 핵생성과 성장을 촉진시켰으며 본 실험에서의 최적 증착 조건은 증착 압력 20 torr, bias 인가전압 200V, 기판온도 $700^{\circ}C$로 나타났다. 강에의 다이아몬드 박막 형성 시 중간 층으로서의 티타늄은 Fe 및 C에 대한 확산도가 높고 탄화물 형성 원소이므로 다이아몬드 핵생성 및 성장에 적합한 원소로 나타났다.

반응성열CVD를 이용한 고효율 박막태양전지용 게르마늄박막의 저온에피성장 (Low-temperature growth of epi-Ge thin films by Reactive thermal CVD)

  • 임철현;송승헌;이석호;한나쥰이치
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2010년도 춘계학술대회 초록집
    • /
    • pp.102.1-102.1
    • /
    • 2010
  • 고효율 멀티정션박막태양전지의 바텀셀 적용을 목적으로, 반응성CVD(Reactive thermal CVD)기술을 이용, $Si_2H_6+GeF_4$를 원료가스로, 이들이 가진 산화환원반응을 이용하여 400도 이하의 저온에서 Ge 및 Si 기판에 Ge을 에피성장 시켰다. Ge 기판위의 호모에피막의 경우, $2.5{\AA}/sec$의 성장속도와 99%의 Ge조성을 보였고, RHEED 및 HR-XRD를 통한 결정성 평가 결과, 고품질의 Ge 에피막의 성장이 확인되었다. 동일한 성장조건을 Si기판에 헤테로에피성장 시켰을 경우, 4% 격자불일치에 의해 막품질이 저하되는 것을 확인하였다. 이를 개선하기 위하여 저온에서 제작한 버퍼층에 대한 논의를 하고자 한다.

  • PDF

ICP-CVD 방법으로 성장된 탄소 나노튜브의 구조적 특성 및 전계방출 특성: 기판전압 인가 효과 (Structural and Field-emissive Properties of Carbon Nanotubes Produced by ICP-CVD: Effects of Substrate-Biasing)

  • 박창균;김종필;윤성준;박진석
    • 전기학회논문지
    • /
    • 제56권1호
    • /
    • pp.132-138
    • /
    • 2007
  • Carbon nanotubes (CNTs) arc grown on Ni catalysts employing an inductively-coupled plasma chemical vapor deposition (ICP-CVD) method. The structural and field-emissive properties of the CNTs grown are characterized in terms of the substrate-bias applied. Characterization using the various techniques, such as field-omission scanning electron microscopy (FESEM), high-resolution transmission electron microscopy (HRTEM), Auger spectroscopy (AES), and Raman spectroscopy, shows that the structural properties of the CNTs, including their physical dimensions and crystal qualities, as well as the nature of vertical growth, are strongly dependent upon the application of substrate bias during CNT growth. It is for the first time observed that the provailing growth mechanism of CNTs, which is either due to tip-driven growth or based-on-catalyst growth, may be influenced by substrate biasing. It is also seen that negatively substrate-biasing would promote the vertical-alignment of the CNTs grown, compared to positively substrate-biasing. However, the CNTs grown under the positively-biased condition display a higher electron-emission capability than those grown under the negatively-biased condition or without any bias applied.

화학기상증착법(CVD)을 이용한 진공 박막 공정기술 (Thin Film Vacuum Process Technology via Chemical Vapor Deposition Methods)

  • 홍완식
    • 진공이야기
    • /
    • 제1권3호
    • /
    • pp.9-13
    • /
    • 2014
  • Vacuum growth of thin films via chemical vapor deposition (CVD) methods has been extensively used in modern semiconductor and flat panel display industries. The CVD processes have a wide range of variation and are categorized according to their working conditions, power sources, precursor materials, and so forth. Basic components and process steps common to all CVD branches are discussed. In addition, characteristics and applications of two major CVD techniques - LPCVD and PECVD - are reviewed briefly.