• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.179-180
• /
• 2007

반도체의 최소 회로 선폭이 감소함에 따라 Contact 저항이 크게 증가하게 된다. Contact 저항을 낮추기 위하여 Tungsten Metal Contact을 일반적으로 사용하며, Si 기판과의 Ohmic 접촉 및 WF6의 Fluorine과 Si 반응을 억제하기 위한 Barrier Metal로 Ti/TiN 이중막을 사용한다. 본 논문에서는 90nm급 이하 제품의 CVD Ti/TiN Barrier Metal이 유발하는 불량 현상과 원인 규명에 대하여 연구하였으며, Ohmic Contact형성을 위해 TiSix형성 최적화 방안에 대해 정리하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 춘계학술대회 논문집 반도체재료
• /
• pp.54-56
• /
• 2001

The $SiH_4$ soak step is widely used during the CVD Tungsten(W) plug deposition process on the Ti/TiN barrier metal to prevent the $WF_6$ attack to the underlayer metal. We tried to reduce or skip the time of $SiH_4$ soak process to optimize W-plug deposition process on Via. The electrical characteristics including Via resistance and the structure of W film are affected according to $SiH_4$ soak time. The elimination possibility of $SiH_4$ soak process was confirmed in the case of that the CVD W film grows on the stable Ti/TiN underlayer.

• 전자공학회논문지A
• /
• 제31A권5호
• /
• pp.94-100
• /
• 1994

The junction failure mechanism of W plugs has not been fully understood while the selective W deposition has been widely used for plugging interconnection lines. In this paper, the thermal stability and junction failure mechanism of sub-micron contacts using selective CVD-W plugs were intensively studied with the metal lines of AISiCu, Ti/AISiCu and TiN/AISiCu. The experimental results showed that the contact chain resistance and leakage current in the AISiCu and Ti/AISiCu metallizations were significantly degraded after annealing. From the SEM analysis, it was found that the junction spiking, due to the Al atoms diffusion along the porous interface between selective CVD-W and contactside wall, caused the junction failure. In constast, there was no degradation of the contact resistance and junction leakage current in TiN/AISiCu metal structu-re. It is believed that the TiN barrier layer could prevent AI(Ti) atoms Fromdiffusing. Therefore, TiN barrier between W plug and Al should be used to impro-ve the thermal stability of sub-micron contacts using the selective CVD-W plugs.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제4C권3호
• /
• pp.111-116
• /
• 2004

The Ni/SiC Schottky diode was fabricated with the $\alpha$-SiC thin film grown by the ICP-CVD method on a (111) Si wafer. $\alpha$-SiC film has been grown on a carbonized Si layer in which the Si surface was chemically converted to a very thin SiC layer achieved using an ICP-CVD method at $700^{\circ}C$. To reduce defects between the Si and $\alpha$-SiC, the surface of the Si wafer was slightly carbonized. The film characteristics of $\alpha$-SiC were investigated by employing TEM (Transmission Electron Microscopy) and FT-IR (Fourier Transform Infrared Spectroscopy). Sputterd Ni thin film was used as the anode metal. The boundary status of the Ni/SiC contact was investigated by AES (Auger Electron Spectroscopy) as a function of the annealing temperature. It is shown that the ohmic contact could be acquired beyond a 100$0^{\circ}C$ annealing temperature. The forward voltage drop at 100A/cm was I.0V. The breakdown voltage of the Ni/$\alpha$-SiC Schottky diode was 545 V, which is five times larger than the ideal breakdown voltage of the silicon device. As well, the dependence of barrier height on temperature was observed. The barrier height from C- V characteristics was higher than those from I-V.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1999년도 제16회 학술발표회 논문개요집
• /
• pp.105-105
• /
• 1999

• 한국재료학회지
• /
• 제3권6호
• /
• pp.661-667
• /
• 1993

Conatact barrier metal용 selective W CVD 기술에서 $SiH_4//WF_6$(=R)유량비가 W막의 비저항, contact resistance, 접합주설전류 등의 전기적 특성에 미치는 영향을 $\beta$-W 의 생성에 촛점을 맞추어 조사하였다. R의 증가에 따라 W의 비저항이 증가하는데, 그 주원인은 $\alpha$-W로 부터 $\beta$-W 로의 상변태에 있다. $SiH_{4}$환원에 의한 CVD W에서 생성되는 $\beta$-W 는 산소에 의해서가 아니라 막내에 유입된 Si에 의하여 안정화된다. Si기탄상에 W를 증착할 때에는 R값이 클 경우에 $\beta$-W 가 생성되지만, TiN 기판상에 W를 증착할 때에는 R값이 큰 경우에도 $\beta$-W 가 생성되지 않는 것으로 나타났다. 또한 R이 증가함에 따라 접합누설전류가 증가하는데, 이것은 W-Si계면에 대한 수직방향으로의 Si의 소모뿐만 아니라 수평방향으로의 Si의 소모에도 그 원인이 있는 것으로 보인다.

• 한국전기전자재료학회논문지
• /
• 제16권1호
• /
• pp.1-4
• /
• 2003

The SiH$_4$soak step is widely used to prevent the WF$_{6}$ attack to the underlayer metal using the chemical vapor deposition (CVD) method. Reduction or skipping of the SiH$_4$soak process time if lead to optimizing W-plug deposition process on via. The electrical characteristics including via resistance and the structure of W-film are affected by the time of SiH$_4$soak process. The possibility of elimination of SiH$_4$soak process is confirmed In the case of W- film grown on the stable Ti/TiN underlayer.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1998년도 IUMRS-ICEM ABSTRACT BOOK
• /
• pp.153.1-153
• /
• 1998

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 추계학술대회 논문집 학회본부 C
• /
• pp.440-442
• /
• 2000

We have successfully fabricated SiC Schottky diodes using Al, Ni, Ti metallization systems. Schottky barrier height and other parameter have been measured by using I-V and C-V technique. The measured barreir heights depend on the metal and measurement techniques used. The barrier heights were 1.85eV(Al), 1.63eV(Ni), 0.97eV(Ti). The Ideality factors were 1.16(Al), 1.07(Ni), 1.05(Ti). Thermal stress tests were performed.

• 한국재료학회지
• /
• 제9권11호
• /
• pp.1129-1136
• /
• 1999

TEMAT precursor를 사용하여 다양한 증착 조건으로 ICP-CVD 방법으로 Si(100) 기판 위에 TiN 박막을 형성하였다. 형성된 TiN 박막의 결정상, 미세구조, 그리고 전기적 특성은 XRD, XPS, HRTEM, 그리고 전기적 측정으로 특성을 조사하였다. BI 구조를 갖는 다결정 TiN 박막은 기판의 온도가 $200^{\circ}C$ 이상의 온도에서 형성되었다. TiN(111) 박막은 기판의 온도가 $300^{\circ}C$에서 TEMAT, $\textrm{N}_{2}$, 그리고 Ar 가스의 유량이 10, 5, 그리고 5sccm으로 반응로에 주입할 때 형성되었다. TiN/Si(100) 계면은 TiN과 $\textrm{SiO}_2$사이에 계면반응이 없었으며 평탄하였다. 기판의 온도가 $500^{\circ}C$에서 형성된 TiN 박막의 비저항, carrier 농도와 이동도는 21 $\mu\Omega$cm, 9.5$\times\textrm{10}^{18}\textrm{cm}^{-3}$와 $462.6\textrm{cm}^{2}$/Vs으로 주어졌다.