• 분석과학
• /
• 제8권2호
• /
• pp.107-116
• /
• 1995

양이온 계면활성제인 cetyltrimethyl ammonium bromide(CTAB)를 첨가함에 따라 4-biphenyl acetate ($BPA^-$) 음이온의 202nm band의 흡광도 변화를 측정하여 CTAB의 CMC를 구하였다. 또한 $30^{\circ}C{\sim}70^{\circ}C$의 온도범위에서 CTAB의 미셀화 과정에 수반되는 열역학적 파라미터를 구하였다. 이 온도범위에서 CTAB의 미셀화 자유에너지는 음의 값을 나타내며 미셀화 엔트로피(${\Delta}S^{\circ}m$)는 큰 양의 값을 나타내고 있다. CTAB의 미셀화 과정은 자발적인 상전이(phase transition) 현상임을 알 수 있었다. $300MHz\;H^1-NMR$ 자료로부터 $BPA^-$ 음이온의 CTAB 미셀내의 배향을 알 수 있었다. $BPA^-$ 음이온의 방향족 기가 CTAB 미셀내의 palisade layer까지 침투하여 혼합 미셀을 형성함을 알 수 있었다.

• 대한화학회지
• /
• 제55권4호
• /
• pp.691-696
• /
• 2011

CTAB 혹은 CTAB-나피온 촉매를 속빈 실리콘 튜브형 MCM-41에 담지시켰다. 이들 촉매들을 XRD, SEM, BET 등으로 분석하였다. 이들을 1,7-heptanediol 의 브롬화 반응 촉매로 사용하였고 다른 촉매들과 비교하였다. 이들 촉매들은 CTAB 보다 효과가 좋았으며 CTAB-Nafion/MCM-41 이 성능이 가장 우수하였다.

• 공업화학
• /
• 제9권1호
• /
• pp.20-27
• /
• 1998

CTAB에 의한 CuS 침전 미립자의 응집과 기포 흡착특성을 고찰하였다. CTAB의 기포흡착은 Langmuir흡착식을 따르며, 포말간 본체액의 동반을 고려한 회분해석으로부터 구한 흡착열은 3700cal/mol로 나타났다. CTAB에 의한 CuS미립자의 기포흡착은 기포-입자간 충돌흡착으로 설명되었고, 흡착분리에 대한 최적 농도비는 CuS의 최적 응집농도비와 일치하였으며, 그 값은 [CTAB] 대 [CuS]가 0.1로 얻어졌다. 기포에 의한 포집효율은 pH와 CTAB농도 등에 의존하나 공기의 유량에는 무관하였으며, 최대 포집효율은 최적 첨가농도에서 0.0002로 나타났다. 또한 Cu-Cd-Zn 황화물의 혼합계에서 CTAB를 사용한 기포흡착의 경우 ZnS의 선택적 분리가 가능하였다.

• Bulletin of the Korean Chemical Society
• /
• 제23권1호
• /
• pp.29-34
• /
• 2002

The microphase adsorption - spectral correction (MPASC) technique was described and applied to study the interaction of fluorescein isothiocyanate (FITC) with cetyl trimethylammonium bromide (CTAB). The synergism mechanism of micelle was analyzed and discussed. The aggregation of FITC on CTAB obeys the Langmuir monolayer adsorption. Results showed that the monomer and micellar aggregate is $FITC-CTAB_3$ and $(FITC-CTAB_3)_{29}$, respectively at pH 9.62. The adsorption constant of the CTAB-FITC aggregate was determined to be $2.10{\times}10^5$. Interestingly, it was observed for the addition of an anionic surfactant to desorb FITC from its CTAB aggregate and this has been applied to the quantitative determination of trace amounts of anionic detergent (AD) in sewage.

• Archives of Pharmacal Research
• /
• 제4권2호
• /
• pp.75-84
• /
• 1981

As the cetyltrimenthy ammonium bromide (CTAB) concentration increases to $2{\times}10^{-4}$/M the absorption maximum of ethyl orange (EO) makes a blue shift from 475 mm to 395 mm. At higher concentration of CTAB than $2{\times}10^{-4}$ / M the absorption maximum shifts to higher wavelength than 395 nm. A new peak at 395 nm is shown to result from the mixed micelle due to dye stacking interaction rather than from a change in dye geometry. Because Raman spectra of EO on interaction with varying amount of CTAB are similar to that of EO in water. EO retains trans azo type on interaction with CTAB. There is a change of c.m.c.s. of CTAB for the mixed micelle in the presence of salt. The effect of added salt on C. M. C. of CTAB for the mixed micelle is given that the logarithm of the c. m. c. is a linear function of the logarithm of the sum of the c. m. c. and the concentration of added salt.

• 공업화학
• /
• 제32권1호
• /
• pp.110-116
• /
• 2021

In this work, the surface of hydrophilic cellulose nanofibrils (CNFs) was modified precisely by varying amounts of cetyltrimethylammonium bromide (CTAB) to produce CNF-based particle surfactants. We found that a critical CTAB density was required to generate amphiphilic CTAB-grafted CNF (CNF-CTAB). Compared to pristine CNF, CNF-CTAB was highly efficient at stabilizing oil-in-water Pickering emulsions. To evaluate their effectiveness as particle surfactants, the surface coverage of oil-in-water emulsion droplets was determined by changing the CNF-CTAB concentration in the aqueous phase. Furthermore, styrene-in-water stabilized by CNF-CTAB surfactants was thermally polymerized to produce CNF-stabilized polystyrene (PS) particles, offering a great potential for various applications including pharmaceuticals, cosmetics, and petrochemicals.

• Korean Chemical Engineering Research
• /
• 제62권1호
• /
• pp.99-104
• /
• 2024

본 연구에서는 고용량 리튬이온배터리용 음극 소재로 탄소 코팅된 할로우 구조의 실리콘(HSi/C) 복합소재를 제조하였다. CTAB (N-Cetyltrimethylammonium bromide)이 첨가된 Stöber법을 통해 할로우 실리카(HSiO₂)를 합성하였으며, HSiO₂를 마그네슘열 환원한뒤 표면에탄소를 코팅하여 HSi/C 음극복합소재를 제조하였다. 복합소재의물리적 특성과 전기화학적 특성을 CTAB 조성에 따라 조사하였다. FE-SEM 분석 결과 CTAB 조성이 감소할수록 HSiO₂ 입자의 크기가 커졌으나 두께는 감소하였다. 제조된 HSi/C 소재는 다양한 CTAB 비율(0.5, 1.0, 1.5)에서 각각 2188.6, 2164.5, 1866.7 mAh/g의 높은 초기 방전용량을 나타내었으며, 100 사이클의 충·방전 후 0.5-HSi/C가 1171.3 mAh/g의 높은 가역 용량과 70.9%의 용량 유지율을 보여주었다. 전기화학 임피던스 분광법(Electrochemical Impedance Spectroscopy, EIS)으로 저항 특성을 분석하였으며, 0.5-HSi/C 소재가 20 사이클 이후 다른 CTAB 조성의 HSi/C 복합소재에 비해 안정적인 저항 특성을 보이는 것을 확인하였다.

• Bulletin of the Korean Chemical Society
• /
• 제24권10호
• /
• pp.1444-1448
• /
• 2003

The microsurface adsorption - spectral correction (MSASC) technique has been applied to the interaction of indigo carmine (IC) with cetyltrimethylammonium bromide (CTAB). The aggregation of IC on CTAB obeys Langmuir isothermal adsorption. The results show that both the monomer complex $IC{\cdot}CTAB$ and the micellar complex $(IC{\cdot}CTAB)_{78}$ were formed. The binding constant of the monomer complex was calculated to be $K_{IC{\cdot}CTAB}$ = 2.20 ${\times}10^5L{\cdot}mol^{-1}$, and the molar absorptivity of the micellar complex was calculated to be ${\varepsilon}_{(IC{\cdot}CTAB)78}\;^{560nm}$ = 8.58 ${\times}10^5L{\cdot}mol^{-1}{\cdot}cm^{-1}$. The aggregation was applied to the determination of cationic surfactant in wastewater.

• 한국의류학회지
• /
• 제16권3호
• /
• pp.335-344
• /
• 1992

This study was conducted to investigate the influence of addition of cetyl trimethyl ammo­nium bromide (CTAB), and amine [ethylamine (EA) or ethylene diamine (EDA)] to aqueous sodium hydroxide (NaOH) solution on polyester alkaline hydrolysis, The experimental vari­ables such as CTAB concentration, EA or EDA concentration, NaOH concentration, tempera­ture and time were compared, and the changes in physical and chemical properties of alkaline­hydrolyzed PET fabrics depending on their treated conditions were measured, The results are as follows: 1. By adding CTAB and amine in aqueous NaOH solution, increasing effect on weight loss of PET fabrics was obtained in simultaneous addition of CTAB and EDA, but not in CTAB and EA. 2. By adding CTAB & EDA simultaneously, increasing effect on weight loss was obtained regardless of EDA concentration, time and temperature, and it was more effective at lower NaOH concentration. :l. The increase of void space (or irregularly grooved surface), of softness, of wickability, of dyeability on PET fabric, and the decrease of tensile strength, of molecular weight were observed according to the weight loss on the PET fabrics. These changes were equal to all alkaline-hydrolyzed PET fabrics regardless of addition of CTAB and amine. l. There was little changes on crystallinity, thermal behavior when PET fiber was treated with ,aqueous NaOH solution with CTAB and EDA. These results supported that increasing effect on weight loss take place without inducing of fine structural change of PET fibers.

• Carbon letters
• /
• 제10권4호
• /
• pp.305-313
• /
• 2009

In this study, the adsorption of toxic pollutants onto cetyltrimethylammonium kaolin (CTAB-Kaolin) is investigated. The organo-kaolin is synthesized by exchanging cetyltrimethylammonium cations (CTAB) with inorganic ions on the surface of kaolin. The chemical analysis, the structural and textural properties of kaolin and CTAB-kaolin were investigated using elemental analysis, FTIR, SEM and adsorption of nitrogen at $-196^{\circ}C$. The kinetic adsorption and adsorption capacity of the organo-kaolin towards o-xylene, phenol and Cu(II) ion from aqueous solution was investigated. The kinetic adsorption data of o-xylene, phenol and Cu(II) are in agreement with a second order model. The equilibrium adsorption data were found to fit Langmuir equation. The uptake of o-xylene and phenol from their aqueous solution by kaolin, CTAB-kaolin and activated carbon proceed via physisorption. The removal of Cu(II) ion from water depends on the surface properties of the adsorbent. Onto kaolin, the Cu(II) ions are adsorbed through cation exchange with $Na^+$. For CTAB-kaolin, Cu(II) ions are mainly adsorbed via electrostatic attraction with the counter ions in the electric double layer ($Br^-$), via ion pairing, Cu(II) ions removal by the activated carbon is probably related to the carbon-oxygen groups particularly those of acid type. The adsorption capacities of CTAB-kaolin for the investigated adsorbates are considerably higher compared with those of unmodified kaolin. However, the adsorption capacities of the activated carbons are by far higher than those determined for CTAB-kaolin.