• 한국의류학회지
• /
• 제30권12호
• /
• pp.1788-1799
• /
• 2006

본 연구에서는 머천다이징 프로그램에서 인터넷을 기반으로한 학습시스템(e학습시스템)인 WebCT를 의류학과내의 머천다이징 교과과정에서 운영하였을때 학생들이 경험한 여러가지 시각에 대하여 알아보았다. 연구는 온라인 병행강의 혹은 온라인 강의가 시도된 바 없는 한 미국대학에서 WebCT를 처음 도입한 후 2년의 기간 동안 학생들이 시스템에 대하여 느끼는 편의성과 유용성 그리고 선호도와 만족도가 어떻게 바뀌어나가는지 통시적으로 알아보았으며 이러한 경향이 수강학생들의 학점에 미치는 영향을 알아 보았다 2년 동안 매학기 평균 1.5개 정도의 WebCT운영강의에 노출된 학생들이 매 학기말마다 WebCT의 편의성, 유용성 그리고 선호도와 만족도를 묻는 설문에 응하였으며 각 학생들의 최종성적이 함께 데이터화 되어 분석되었다. 분석결과 인터넷이나 컴퓨터사용여부는 더이상 e학습시스템의 걸림돌이 되지 않는 것으로 나타났으며 학생들은 시스템을 무시하거나 과도하게 사용하지 않고 전반적으로 매우 효율적으로 사용하고 있었다. 학생들은 4년간의 대학생활 중 일찍 WebCT에 노출될수록, 한꺼번에 여러과목의 WebCT과목을 들을수록, WebCT수업을 경험할수록 그리고 여학생일수록 WebCT가 유용하다고 지각하고 있었으며 선호도와 만족도가 높은 것으로 나탔다. 한편 WebCT에 대한 선호도와 만족도는 한학기 동안 수강 후 학생들의 성적에 유의한 영향을 주는 것으로 분석되었다.

• Journal of Communications and Networks
• /
• 제14권2호
• /
• pp.169-178
• /
• 2012

In this paper, we study the advantages of using range extension cooperative transmission (CT) in multi-hop energy harvesting wireless sensor networks (EH-WSNs) from the network layer perspective. EH-WSNs rely on harvested energy, and therefore, if a required service is energy-intensive, the network may not be able to support the service successfully. We show that CT networks that utilize both range extension CT and non-CT routing can successfully support services that cannot be supported by non-CT networks. For a two-hop toy network, we show that range extension CT can provide better services than non-CT. Then, we provide a method of determining the supportable services that can be achieved by using optimal non-CT and CT routing protocols for EH-WSNs. Using our method and network simulations, we justify our claim that CT networks can provide better services than nonCT networks in EH-WSNs.

• 대한방사선기술학회지:방사선기술과학
• /
• 제35권1호
• /
• pp.59-64
• /
• 2012

최근에는 SPECT/CT의 보급으로 융합영상을 여러 질환에 적용하고 있지만, 폐질환에 대한 적용은 널리 이용되고 있지 않다. 특히, CT 결과에서 폐색전증을 의심하여 SPECT를 시행하는 경우가 발생하며, 보다 정확한 진단을 위해 SPECT/CT가 중요하다. 하지만, SPECT/CT를 보유하지 않은 병원에서는 적용에 한계가 발생하며, SPECT/CT를 보유한 병원에서 검사를 시행한다 하더라도 이미 CT검사 이후 SPECT/CT를 진행하는 경우가 많다. CT검사에서 발생하는 피폭선량 외에도 추가적인 SPECT/CT는 이중으로 피폭선량을 발생하는 경우 해당되며, 불필요한 피폭이 발생하는 경우에 속한다. 그러므로 본 연구에서는 불필요한 피폭을 방지하고, SPECT/CT를 보유하지 않은 의료기관에서 SPECT와 CT의 각각 획득된 영상을 융합하고, 폐질환에서의 영상의 유용성을 평가하였다. 팬텀실험은 NEMA $Phantom^{TM}$ (NU2-2001)으로 SPECT와 CT에서 획득된 영상을 융합하였으며, 임상적용은 10명의 환자(남자 7명, 여자3명, 평균나이: 65.3세${\pm}$12.7세)를 대상으로 각각의 영상을 융합하여 분석하였다. 팬텀실험과 임상적용에서 모두 SPECT, CT의 각각의 영상보다 fusion image에서 높은 점수를 나타내었으며, SPECT와 CT영상을 fusion하여 각각의 장점을 극대화 할 수 있었다. CT영상으로부터 획득한 폐혈관 image가 SPECT로부터 얻은 기능적인 영상을 fusion함으로써 pulmonary embolism이 폐실질에 나타내는 영향을 더욱 잘 묘사할 수 있었다. SPECT/CT가 가장 이상적이라 할 수 있지만, 아직 보급되어 있지 않은 경우 이와 같은 프로토콜을 이용하여 진단에 사용한다면 보다 정확한 진단에 도움이 되리라 사료된다.

• Journal of International Society for Simulation Surgery
• /
• 제3권1호
• /
• pp.16-21
• /
• 2016

Computed tomography (CT) can completely digitize the interior and the exterior of nearly any object without any destruction. Generally, the resolution for industrial CT is below a few microns. The industrial CT scanning, however, has a limitation because it requires long measuring and processing time. Whereas, 2D X-ray imaging is fast. In this paper, we propose a novel concept of 3D non-destructive inspection technique using the advantages of both micro-CT and dual X-ray images. After registering the master object’s CT data and the sample objects’ dual X-ray images, 3D non-destructive inspection is possible by analyzing the matching results. Calculation for the registration is accelerated by parallel computing using graphics processing unit (GPU).

• 한국의학물리학회지:의학물리
• /
• 제32권1호
• /
• pp.18-24
• /
• 2021

Purpose: Kilovoltage computed tomography (kV-CT) is essential for radiation treatment planning. However, kV-CT images are significantly distorted by artifacts when a metallic prosthesis is present in the patient's body. Thus, the accuracies of target delineation and treatment dose calculation are inevitably lowered. We evaluated the accuracy of the calculated doses using an image restoration method with hybrid CT, which was introduced in our previous study. Methods: A cylindrical phantom containing four metals, namely, silver, copper, tin, and tungsten, was scanned using kV-CT and megavoltage CT to produce hybrid CT images. We created six verification plans for three head and neck patients on kV-CT and hybrid CT images of the phantom and calculated their doses. The actual doses were measured with film patches during beam delivery using tomotherapy. We used the gamma evaluation method to compare dose distribution between kV-CT and hybrid CT with three gamma criteria, namely, 3%/3 mm, 2%/2 mm, and 1%/1 mm. Results: The gamma pass rates decreased as the gamma criteria were strengthened, and the pass rate of hybrid CT was higher than that of kV-CT in all cases. When the 1%/1 mm criterion was used, the difference in gamma pass rates between them was up to 13%p. Conclusions: According to our findings, we expect that the use of hybrid CT can be a suitable approach to avoid the effect of severe metal artifacts on the accuracy of dose calculation and contouring.

• 대한방사선기술학회지:방사선기술과학
• /
• 제27권2호
• /
• pp.21-27
• /
• 2004

본 연구에서는 현재 국내에서 사용되고 있는 여러 기종의 CT장치를 대상으로 하여 CT검사로 인한 방사선피폭 정도를 실험을 통하여 알아보고, 외국의 사례와 비교함으로써 CT장치의 성능관리의 하나인 피폭선량 기준 설정에 필요한 기초 데이터를 제시하고자 서울시 및 경기도에 위치한 병의원 및 종합병원에서 가동 중인 32대의 CT장치를 대상으로 CTDI값을 측정한 결과 다음과 같았다. 1) Head phantom의 100 mAs 당 $CTDI_W$값은 $8.1{\sim}19.1\;mGy$ 범위였고, 평균 $13.5{\pm}3.2\;mGy$였다. 그리고 body phantom의 $CTDI_W$값은 $3.7{\sim}10.9\;mGy$ 범위였고, 평균 $7.1{\pm}2.0\;mGy$였다. 2) Single detector CT와 multi detector CT의 $CTDI_W$값을 비교해 보면, multi detector CT가 single detector CT에 비해 head phantom에서는 평균 3.2 mGy(약 1.26배), body phantom에서는 평균 2.1 mGy(약 1.34배) 높았다. 3) Channel 수에 따른 $CTDI_W$값 비교에서는 head pahantom에서는 4 channel CT가 가장 높았으며, 8 channel CT, 16 channel CT, single detector CT순이었으며, body phantom에서는 역시 4 channel CT와 8 channel CT, 16 channel CT, single detector CT순이었다.

• 대한방사선기술학회지:방사선기술과학
• /
• 제44권4호
• /
• pp.367-373
• /
• 2021

A quality assurance of computed tomography(CT) have done seven items that were water attenuation coefficient, noise, homogeneity, spatial resolution, contrast resolution, slice thickness, artifact using by standard phantom. But there is no quality assurance items and methods for CT simulator at domestic institutions yet. Therefore the study aimed to access the CT dose index(CTDI), table tilting, image distortion, laser accuracy, table movement accuracy and CT seven items for CT simulator quality assurance. The CTDI at the center of the head phantom was 0.81 for 80 kVp, 1.55 for 100 kVp, 2.50 for 120 mm, 0.22 for 80 kVp at the center of the body phantom, 0.469 for 100 kVp, and 0.81 for 120 kVp. The table tilting was within the tolerance range of ±1.0° or less. Image distortion had 1 mm distortion in the left and right images based on the center, and the laser accuracy was measured within ±2 mm tolerance. The purpose of this study is to improve the quality assurance items suitable for the current situation in Korea in order to protect the normal tissues during the radiation treatment process and manage the CT simulator that is implemented to find the location of the tumor more clearly. In order to improve the accuracy of the CT simulator when looking at the results, the error range of each item should be small. It is hoped that the quality assurance items of the CT simulator will be improved by suggesting the quality assurance direction of the CT simulator in this study, and the results of radiation therapy will also improve.

• 과학과기술
• /
• 제30권3호통권334호
• /
• pp.88-89
• /
• 1997

(주)유양정보통신은 지난 1년9개월동안 총 25억의 연구개발비와 27명의 개발인력을 투입하여 광역삐삐 내장형 시티폰(CT-2플러스)을 개발해 유망한 정보통신업체로 각광을 받고 있다. 작년 9월 시험통화를 거쳐 12월부터 시판된 CT-2 플러스는 현재 1만대 정도 보급되어 있으며 호출기 기능이 내장되지 않더라도 서비스가 가능한 새제품 CT-3 개발에도 박차를 가하고 있다.

• 대한디지털의료영상학회논문지
• /
• 제13권3호
• /
• pp.111-115
• /
• 2011

PET/CT(Positron Emission Tomography/Computed Tomography) is an examination combining morphological and functional information in one examination. The purpose of this study is to see the lowest CT dose for attenuation correction in the PET/CT maintaining good image quality when considering CT scan dose to the patients. We injected $^{18}F$-FDG and water into the cylinder shaped phantom, and obtained emission images for 3 mins and transmission images(140 kVp, 8 sec, 10~200 mA for transmission images), and reconstructed the images to PET/CT images with Iterative method. Data(Maximum, Minimum, Average, Standard Deviation) were obtained by drawing a circular ROI(Region Of Interest) on each sphere in each image set with Image J program. And then described SD according to the CT and PEC/CT images as graphes. Through the graphes, we got the relationships of mA and quality of images. SDs according to CT graph were 16.25 at 10 mA, 7.26 at 50 mA, 5.5 at 100 mA, 4.29 at 150 mA, and 3.83 at 200 mA, i.e. the higer mA, the better image quality was presented. SDs according to PET/CT graph were 1823.2 at 10 mA, 1825.1 at 50 mA, 1828.4 at 100 mA, 1813.8 at 150 mA, and 1811.3 at 200 mA. Calculated SDs at PET/CT images were maintained. This means images quality is maintained having nothing to do with mA of high and low.

• International Journal of CAD/CAM
• /
• 제6권1호
• /
• pp.81-87
• /
• 2006

This paper describes a method for extracting surfaces from multi-material CT (Computed Tomography) data. Most contouring methods such as Marching Cubes algorithm assume that CT data are composed of only two materials. Some extended methods such as [3, 6] can extract surfaces from the multi-material (non-manifold) implicit representation. However, these methods are not directly applicable to CT data that are composed of three or more materials. There are two major problems that arise from fundamentals of CT. The first problem is that we have to use n(n-1)/2 threshold values for CT data contains n materials and select appropriately one threshold value for each boundary area. The second is that we cannot reconstruct only from CT data in which area three or more materials are adjacent each other. In this paper, we propose a method to solve the problems by using image analysis and demonstrate the effectiveness of the method with application examples construct polygon models from CT data of machine parts.