• Communications of Mathematical Education
• /
• v.29 no.1
• /
• pp.19-33
• /
• 2015

Recently in major industrial areas, there has been a rapidly increasing demand for 'Computational Thinking', which is integrated with a computer's ability to think as a human world. Developed countries in the last 20 years naturally have been improving students' computational thinking as a way to solve math problems with CAS in the areas of mathematical reasoning, problem solving and communication. Also, textbooks reflected in the 2009 curriculum contain the applications of various CAS tools and focus on the improvement of 'Computational Thinking'. In this paper, we analyze the cases of mathematics education based on 'Computational Thinking' and discuss the mathematical content that uses the CAS tools including Sage for improving 'Computational Thinking'. Also, we show examples of programs based on 'Computational Thinking' for teaching Calculus in university.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.7 no.4
• /
• pp.103-113
• /
• 1987

Fatigue tests using a single-peak loading and a two-step loading were carried out to examine the fatigue crack growth behaviar and to find the appropriate analysis method. C-T specimens were made using structural steel SWS58 for the tests. From this, just after a single-peak loading acceleration effect was occured and after some times retardation effect was found. And eminent retardation effect was found after High-Low two-step loading. The transition effect of crack growth due to this variable loading was occured owing to the residual stress and the plastic zone size at the crack tip. And the behaviors of these are well explained by Elber's Crack Closure Model. Also I could find that the Wheeler's Retardation Model is a simple and appropriate theory among analysis methods of fatigue crack growth under the variable loading.

• Journal of radiological science and technology
• /
• v.41 no.1
• /
• pp.61-66
• /
• 2018

The recent 3D printing technology is used in various medical, manufacturing, and education fields and is more efficient in terms of production process, time, and cost than existing production. Especially in fracture surgery, interest and research have been focused on improving accuracy, shortening of operation time and recovery time, and reducing reoperation. However, because of the financial and technical problems of the 3D printer and the file conversion program, the 3D printing is made directly at the hospital, and it is not generally used for diagnosis of fracture and surgical research. In this study, to solve those problems, clavicle CT imaging was switched into Osirix Open Source DICOM Viewer, Stereolithography file conversion programs and commercial Terarecon 3D DICOM Viewer, file conversion programs, and then clavicle fracture model was directly made through 3D printer of fused filament fabrication wire additive processing method, and then the accuracy of the shape was compared and analyzed. Clavicle fracture models printed in two methods were blind-tested on clinicians of general hospitals' orthopedics and radiologic technicians with over 10 years of experiences, and then their analysis opinions of resolution reviews were analyzed. The result showed no difference. The 3D printing model with open source DICOM STL file conversion program used was applicable to clinical, so it is considered useful in precision diagnosis of fracture and operation plans.

• Applied Chemistry for Engineering
• /
• v.22 no.1
• /
• pp.91-97
• /
• 2011

The efficacies of anti-atopic preparations were investigated in hairless mice suffering from 2,4-dinitro-chlorobenzene (DNCB)-induced atopic dermatitis-like lesion. Solid lipid nanoparticle (SLN) containing ceramide and astaxanthin was prepared by a melt-homogenization method using Aminsoft-CT 12 (Cocoyl glutamate) as an emulsifier. And then, the SLNs were coated with silk fibroin (SF) by taking advantage of an electrostatic interaction between the surface of SLNs and SF. SLNs were included in lotion (FL) and cream (FC) types of preparations. Anti-atopic efficacies of the preparations were investigated in terms of appearance of skin surface, spleen index, serum IgE level, and serum cytokine level. SLN-containing preparations suppressed IgE production and IL-4 expression, but promoted $IFN-{\gamma}$ expression.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.56 no.6
• /
• pp.841-849
• /
• 2023

Corallina pilulifera (CP) is prevalent along the Korean coastline and belongs to the Corallinaceae family, exhibiting growth throughout all seasons. This study confirmed the role of calcium supplementation through CP, calcined CP (CCP), and a commercial calcium powder, highlighting variations in dosage within animal models induced by a calcium-deficient diet. Analysis of calcium absorption was conducted by assessing the serum and urine calcium levels during the feeding periods. Serum calcium content was significantly higher in the control group (CON, 9.79 mg/dL) than in the calcium-deficient model (CDM, 6.15 mg/dL). The calcium content of urine was significantly higher than that of CON (0.20 mg/dL) compared with CDM (0.08 mg/dL). Reticular bone thickness showed no significant differences between the CON and CDM groups. Additionally, micro-CT results demonstrated a reduction in the trabecular volume and a significant difference between the number of strands and the average interval of the reticular bone. In conclusion, CP serves as a promising source of calcium supplementation. Therefore, these findings emphasize that CP is of sufficient value as an industrial material related to calcium metabolism.

• The Journal of Korean Obstetrics and Gynecology
• /
• v.37 no.1
• /
• pp.23-39
• /
• 2024

Objectives: Primary dysmenorrhea (PD) is defined as abdominal pain during menstruation period in the absence of an identifiable pathological lesion. Corydalis tuber (CT) is an herbal medicine that has an excellent effect in relieving pain and convulsions. The purpose of this study is to observe the effect of Corydalis tuber aqueous extracts (CTe) on primary dysmenorrhea. Methods: The rats were injected with estradiol benzoate subcutaneously for 10 days (2.5 mg/kg on the first and 10th days, and 1 mg/kg from the 2~9th day). Oxytocin 1 U/kg was treated by peritoneal injection 1 hour after the last 10th injection of estradiol benzoate. CTe 400, 200 and 100 mg/kg were administered orally, once a day for 10 days at 30 minutes after each estradiol benzoate treatment. The results of CTe were compared to those of IND 5 mg/kg orally treated rats. Results: As results of estradiol benzoate and oxytocin administration, noticeable decreases of body weights and gains, uterus weights were observed with congestion and enlargement of the uterus at gross inspections, and increases of abdominal writhing responses, uterus MDA levels, GSH contents, SOD and CAT activities. However, these oxidative stress mediated PD signs were dose-dependently decreased by 10 consecutive days of oral administration of three different doses of CTe 400, 200 and 100 mg/kg as comparable to those of IND 5 mg/kg in CTe 200 mg/kg. Conclusions: CTe had a significant improvement effect on primary dysmenorrhea in the PD rat model induced by estrogen benzoate and oxytocin.

• Journal of the Korean Geographical Society
• /
• v.28 no.4
• /
• pp.285-297
• /
• 1993

For the application of the diffusion equation, slope height and maximum slope angle are calculated from the plotted slope profile. Using denudation rate as a solution for the diffusion equation, an apparent age index can be calculated, which is the total amount of denudation through total time. Plots of slope angle versus slope height and apparent age index versus slope height are useful for determining relative or absolute ages and denudation rates. Mathematical simulation plots of slope angle versus slope height can generate equal denudation-rate lines for a given age. Mathematical simulations of slope angle versus age for a given slope height, for equal denudation-rate at a particular profile site, and for comparing to other sites having controlled ages.

• The Journal of Korean Society for Radiation Therapy
• /
• v.27 no.1
• /
• pp.61-71
• /
• 2015

Purpose : 3D Printers are used to create three-dimensional models based on blueprints. Based on this characteristic, it is feasible to develop a bolus that can minimize the air gap between skin and bolus in radiotherapy. This study aims to compare and analyze air gap and target dose at the branded 1 cm bolus with the developed customized bolus using 3D printers. Materials and Methods : RANDO phantom with a protruded tumor was used to procure images using CT simulator. CT DICOM file was transferred into the STL file, equivalent to 3D printers. Using this, customized bolus molding box (maintaining the 1 cm width) was created by processing 3D printers, and paraffin was melted to develop the customized bolus. The air gap of customized bolus and the branded 1 cm bolus was checked, and the differences in air gap was used to compare $D_{max}$, $D_{min}$, $D_{mean}$, $D_{95%}$ and $V_{95%}$ in treatment plan through Eclipse. Results : Customized bolus production period took about 3 days. The total volume of air gap was average $3.9cm^3$ at the customized bolus. And it was average $29.6cm^3$ at the branded 1 cm bolus. The customized bolus developed by the 3D printer was more useful in minimizing the air gap than the branded 1 cm bolus. In the 6 MV photon, at the customized bolus, $D_{max}$, $D_{min}$, $D_{mean}$, $D_{95%}$, $V_{95%}$ of GTV were 102.8%, 88.1%, 99.1%, 95.0%, 94.4% and the $D_{max}$, $D_{min}$, $D_{mean}$, $D_{95%}$, $V_{95%}$ of branded 1cm bolus were 101.4%, 92.0%, 98.2%, 95.2%, 95.7%, respectively. In the proton, at the customized bolus, $D_{max}$, $D_{min}$, $D_{mean}$, $D_{95%}$, $V_{95%}$ of GTV were 104.1%, 84.0%, 101.2%, 95.1%, 99.8% and the $D_{max}$, $D_{min}$, $D_{mean}$, $D_{95%}$, $V_{95%}$ of branded 1cm bolus were 104.8%, 87.9%, 101.5%, 94.9%, 99.9%, respectively. Thus, in treatment plan, there was no significant difference between the customized bolus and 1 cm bolus. However, the normal tissue nearby the GTV showed relatively lower radiation dose. Conclusion : The customized bolus developed by 3D printers was effective in minimizing the air gap, especially when it is used against the treatment area with irregular surface. However, the air gap between branded bolus and skin was not enough to cause a change in target dose. On the other hand, in the chest wall could confirm that dose decrease for small the air gap. Customized bolus production period took about 3 days and the development cost was quite expensive. Therefore, the commercialization of customized bolus developed by 3D printers requires low-cost 3D printer materials, adequate for the use of bolus.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.26 no.3
• /
• pp.221-239
• /
• 2010

Bone loss may occur depending on the loading conditions. careful treatment planning and prosthetic procedures are very important factors for the proper distribution of stress. Evaluate the stress distributions according to numbers and location of implants in three-unit fixed partial dentures. A mandible missing the right second premolar, first molar and second molar was modeled. Using the CT data. we modeled a mandible with a width of 15mm, a height of 20mm and a length of 30mm, 2mm-thickness cortical bone covering cancellous bone mallow. An internal type implant and A solid type abutment was used. A model with 3 implants placed in a straight line, offset 1.5 mm buccally, offset 1.5 mm lingually and another model with 3 implants offset in the opposite way were prepared. And models with 2 implants were both end support models, a mesial cantilever model and a distal cantilever model. Three types of loading was applied; a case where 155 N was applied solely on the second premolar, a case where 206 N was applied solely on the second molar and a case where 155 N was applied on the first premolar and 206 N was applied on the first and second molar. For all the cases, inclined loads of 30 degrees were applied on the buccal cusps and vertical loads were applied on the central fossas of the teeth. Finite element analysis was carried out for each case to find out the stress distribution on bones and implants. This study has shown that prostheses with more implants caused lower stress on bones and implants, no matter what kind of load was applied. Furthermore, it was found out that inclined loads applied on implants had worse effects than vertical loads. Therefore, it is believed that these results should be considered when placing implants in the future.

• The Journal of the Korea Contents Association
• /
• v.5 no.4
• /
• pp.133-140
• /
• 2005

Culture Technology is the basic technology which produces cultural contents in a narrow sense. All nations do their best in order to create new contents which can form international and cultural sympathy. If a variety of contents are created by applying Korean proper cultural heritages, they will be creative and competitive internationally. Therefore, technology of original cultural restoration is an essential and crucial skill. In this paper, 'gilt bronze dragon-phoenix ring-pommeled sword', a cultural heritage of baekje age, will be restored to the original form digitally on the basis of three-dimensional shape-information processing technology and the scientifically analyzed data. First of all, data from three-dimensional scanning is revised using stuffing and smoothing methods after sampling, extracting characteristics, and align. Then, they are modeled in a curved surface with NURBS and B-Spline. Secondly, textures are edited by estimating the color of components and the quality of materials, and then they are mapped. Original form model which was made was revised and corrected by specialists' examinations. The digitally revised ring-pommeled sword was combined with information technology, and it can be used to revise damaged cultural heritages by constructing formal database of ring-pommeled sword with regard to age, area and type. It can be also used as educational contents in archaeology or preservation science and cultural contents such as movies, broadcasts, games, animations and so on.