• Journal of the Korean Recycled Construction Resources Institute
• /
• v.11 no.4
• /
• pp.307-315
• /
• 2023

In this study, mortar test specimens were produced by varying the mixing ratio of CO₂ reaction hardening cement (CSC) and general cement (OPC), and the mechanical and carbonation characteristics were evaluated by controlling the primary curing temperature and secondary curing CO₂ pressure. Under all curing conditions, it was observed that the higher the CSC ratio in the binder, the lower the mechanical properties. Specifically, a first curing temperature of 60 ℃ yielded higher mechanical properties compared to the case of 20 ℃, and a greater carbonation penetration depth was also observed. At a first curing temperature of 60 ℃, it was noted that the curing pressure and bending strength during the second CO₂ curing were inversely proportional, while the compressive strength showed a proportional relationship. This phenomenon is believed to be due to excessive carbonation, which reduces mechanical properties, and the fact that flexural strength is more sensitive to these properties compared to compressive strength. However, based on the evaluation of the limited curing conditions, it is evident that future test conditions need to be expanded and reviewed more thoroughly.

• 한국약용작물학회:학술대회논문집
• /
• 2011.04a
• /
• pp.266-267
• /
• 2011

• Journal of Electrical Engineering and Technology
• /
• v.11 no.5
• /
• pp.1383-1394
• /
• 2016

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.50-50
• /
• 2000

당사는 1970년 제우스 콤 상사로부터 출발하여 1988년 12우러 주식회사 제우스로 법인 전환한 후 현재 한국반도체 산업협회 및 회원으로 등록 활동하고 있다. 이번 발표에서는 회사에 대한 소개와 함께 취급품목을 설명하고자 한다. 취급품목은 Ion beam sources(CSC), E-beam evaporator & E-beam source(Temescal), Residual Gas Analyzer(SPECTRA), Cryopump & Waterpump(CTI-Cryogenics), Thickness Monitor & Controller, Electrical Feedthrough, RTP system, Thin Film Analyzer, PECVD, RIE 등이다.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2015.10a
• /
• pp.43-44
• /
• 2015

• Analytical Science and Technology
• /
• v.30 no.3
• /
• pp.146-153
• /
• 2017

In this study, we isolated ginseng crude saponin (GCS) from Korean red ginseng (KRG) and determined the ginsenoside content in it to investigate the physiological and pathological effects of GCS on acute pulmonary inflammation induced by intratracheal instillation of cigarette smoke condensates (CSC) and lipopolysaccharide (LPS) solution in BALB/c mice. GCS was orally administered at doses of 10 mg/kg and 25 mg/kg for 3 weeks. The recovery rate of GCS from KRG was 6.5 % and total ginsenosides from GCS was 1.13 %, and the content of Rb1 was the highest among them. Total inflammatory cells in the lung homogenates and bronchoalveolar lavage fluid (BALF) increased following intratracheal administration of CSC and LPS. However, GCS administration impaired this increase. Furthermore, it inhibited the increase in leukocytes in the blood, considerably decreased neutrophils in BALF, and declined infiltration of inflammatory cells and deposition of collagen in the tracheal and alveolar tissue. In this study, GCS was found to have a protective effect against acute pulmonary inflammation and it may be beneficial in preventing various respiratory diseases.

• Corrosion Science and Technology
• /
• v.9 no.3
• /
• pp.105-108
• /
• 2010

The product specification of the Continuous Hot Dip Galvanizing Line (CGL) changes and varies constantly with different customers' requirements, especially in the zinc coating weight which is from 30 to 150 g/$m^2$ on each side. Since the coating weight of zinc changes often, it is very important to reduce time spent in the transfer of target values changed for low production cost and yield loss. The No.2 CGL in China Steel Corporation (CSC) has improved the control of the air knife which is designed by Siemens VAI. CSC proposed an experiment design which is an $L_9(3^4)$ orthogonal array to find the relations between zinc coating weight and the process parameters, such as the line speed, air pressure, gap of air knife and air knife position. A non-linear regression formula was derived from the experimental results and applied in the mathematical model. A new air knife feedforward control system, which is coupled with the regression formula, the air knife control system and the process computer, is implemented into the line. The practical plant operation results have been presented to show the transfer time is obviously shortened while zinc coating weight target changing and the product rejected ratio caused by zinc coating weight out of specification is significantly reduced from 0.5% to 0.15 %.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.6
• /
• pp.2973-2978
• /
• 2012

Background: Cancer stem cells (CSC) have been described in a variety of malignancies, including breast carcinomas. Among several markers, aldehyde dehydrogenase 1 (ALDH1) has been identified as reliable for breast cancer stem cells. Knockdown of BRCA1 in primary breast epithelial cells leads to an increase in cells expressing ALDH1. Methods: We examined 127 breast carcinomas for expression of ALDH1, using immunohistochemistry and correlated with clinicopathological parameters as well as the BRAC1 status. Results: Comparing the results for both ALDH1 and BRCA1 expression showed a significant inverse association between the two, indicating that reduced BRCA1 was more often seen in breast cancer cells expressing ALDH1 (p-value = 0.044). A total of 24/110 (22%) of tumours displayed the ALDH1 + / BRCA1 -/low phenotype, which showed a trend for a relation with a high grade (p-value= 0.056). Cytoplasmic expression of ALDH1 was not correlated with tumour characteristics. Conclusion: Taken together, our findings suggest that increased ALDH1 is inversely correlated with decreased BRCA1 in a series of unselected breast carcinomas. Therefore, ALDH1 positive (cancer stem) cells with reduced BRCA1 phenotype may indicate a subset of patients for whom specific targeting of the CSC marker ALDH1 and more aggressive adjuvant treatment is appropriate.

• Biomolecules & Therapeutics
• /
• v.24 no.5
• /
• pp.482-488
• /
• 2016

Cancer stem cells (CSCs) are a subset of tumor cells, which are characterized by resistance against chemotherapy and environmental stress, and are known to cause tumor relapse after therapy. A number of molecular mechanisms underlie the chemoresistance of CSCs, including high expression levels of drug efflux transporters. We investigated the role of the antioxidant transcription factor NF-E2-related factor 2 (NRF2) in chemoresistance development, using a CSC-enriched colonosphere system. HCT116 colonospheres were more resistant to doxorubicin-induced cell death and expressed higher levels of drug efflux transporters such as P-glycoprotein (Pgp) and breast cancer resistance protein (BCRP) compared to HCT116 monolayers. Notably, levels of NRF2 and expression of its target genes were substantially elevated in colonospheres, and these increases were linked to doxorubicin resistance. When NRF2 expression was silenced in colonospheres, Pgp and BCRP expression was downregulated, and doxorubicin resistance was diminished. Collectively, these results indicate that NRF2 activation contributes to chemoresistance acquisition in CSC-enriched colonospheres through the upregulation of drug efflux transporters.

• Smart Structures and Systems
• /
• v.26 no.2
• /
• pp.241-251
• /
• 2020

Due to the undeniable importance of approximating the concrete compressive strength (CSC) in civil engineering, this paper focuses on presenting four novel optimizations of multi-layer perceptron (MLP) neural network, namely artificial bee colony (ABC-MLP), grasshopper optimization algorithm (GOA-MLP), shuffled frog leaping algorithm (SFLA-MLP), and salp swarm algorithm (SSA-MLP) for predicting this crucial parameter. The used dataset consists of 103 rows of information concerning seven influential parameters (cement, slag, water, fly ash, superplasticizer, fine aggregate, and coarse aggregate). In this work, the best-fitted complexity of each ensemble is determined by a population-based sensitivity analysis. The GOA distinguished its self by the least complexity (population size = 50) and emerged as the second time-effective optimizer. Referring to the prediction results, all tested algorithms are able to construct reliable networks. However, the SSA (Correlation = 0.9652 and Error = 1.3939) and GOA (Correlation = 0.9629 and Error = 1.3922) performed more accurately than ABC (Correlation = 0.7060 and Error = 4.0161) and SFLA (Correlation = 0.8890 and Error = 2.5480). Therefore, the SSA-MLP and GOA-MLP can be promising alternatives to laboratorial and traditional CSC evaluative methods.