• Title/Summary/Keyword: CSB

Search Result 98, Processing Time 0.031 seconds

Characteristics of Tidal Current and Tidal Residual Current in the Chunsu Bay, Yellow Sea, Korea based on Numerical Modeling Experiments (수치모델링 실험을 통한 서해 천수만의 조류와 조석잔차류 특성)

  • Jung, Kwang Young;Ro, Young Jae;Kim, Baek Jin
    • Journal of Korean Society of Coastal and Ocean Engineers
    • /
    • v.25 no.4
    • /
    • pp.207-218
    • /
    • 2013
  • This study is based on a series of numerical modeling experiments to understand the circulation and its change in the Chunsu Bay (CSB), Yellow Sea of Korea. A skill analysis was performed for the tidal height and tidal current of the observation data using the amplitude and phase of the 4 major tidal constituents respectively for verification of modeling experimental results. As a result, most of the skill score was seen to be over 90%, so numerical model experiment results can be said to be in good agreement with the observed tidal height and tidal current. Tidal wave proceeded from the entrance of the CSB towards inside, and the tidal range gradually increased to the north. It took about 10 to 30 minutes for the tidal wave to reach to northern end. The tidal wave showed a characteristic to rotate counter-clockwise in the southern part. The tidal current flowed to the north-south direction along the bottom topography; the angle of the major axis appeared alongside the isobath. It showed the characteristics of reversing tidal current with the minor axis less than 10% of the major axis. The strength of the tidal residual current that is influenced by geographical factors including bathymetry and coastline showed the range of 1~30 cm/sec, greater in the south channel and smaller in northern Bay. Two pairs of cyclonic/anti-cyclonic eddies around Jukdo and 3~4 pairs of strong eddies at the southern part of CSB in hundreds of m to a few km size by relative vorticity derived from the tidal residual current.

An Object-Based Image Retrieval Techniques using the Interplay between Cortex and Hippocampus (해마와 피질의 상호 관계를 이용한 객체 기반 영상 검색 기법)

  • Hong Jong-Sun;Kang Dae-Seong
    • Journal of the Institute of Electronics Engineers of Korea SP
    • /
    • v.42 no.4 s.304
    • /
    • pp.95-102
    • /
    • 2005
  • In this paper, we propose a user friendly object-based image retrieval system using the interaction between cortex and hippocampus. Most existing ways of queries in content-based image retrieval rely on query by example or query by sketch. But these methods of queries are not adequate to needs of people's various queries because they are not easy for people to use and restrict. We propose a method of automatic color object extraction using CSB tree map(Color and Spatial based Binary をn map). Extracted objects were transformed to bit stream representing information such as color, size and location by region labelling algorithm and they are learned by the hippocampal neural network using the interplay between cortex and hippocampus. The cells of exciting at peculiar features in brain generate the special sign when people recognize some patterns. The existing neural networks treat each attribute of features evenly. Proposed hippocampal neural network makes an adaptive fast content-based image retrieval system using excitatory learning method that forwards important features to long-term memories and inhibitory teaming method that forwards unimportant features to short-term memories controlled by impression.

중성자잡음신호를 이용한 영광 3,4호기 원자로내부구조물의 진동 분석

  • 조상진;성계용;김봉현
    • Proceedings of the Korean Nuclear Society Conference
    • /
    • 1996.11b
    • /
    • pp.703-710
    • /
    • 1996
  • 본 연구에서는 영광 3,4호기 원자로의 Core Support Barrel 거동을 중성자 잡음해석을 이용하여 분석하였다. 분석 방법은 원자로 노외계측기에서 취득한 교류 성분의 중성자 잡음 신호를 주파수분석하므로서 얻어진 PSD, Phase, Coherence 등을 이용하였다. 영광 3,4호기의 1 주기 동안의 신호를 분석결과, CSB의 Beam Mode 주파수는 영광 3호기의 경우 BOL, MOL, EOL에서 각각 7.75∼8.5Hz, 7.75Hz, 7.25∼7.75Hz로 나타났고, 영광 4호기 BOL에서 8.5∼8.75Hz 임이 도출되었다. 본연구 결과는 한국형 원전의 원자로 내부구조물의 진동 특성을 파악하고 운전중 CSB건전성 진단을 위한 기초 자료로 활용할 수 있다.

  • PDF

Genetic characterization of microsporidians infecting Indian non-mulberry silkworms (Antheraea assamensis and Samia cynthia ricini) by using PCR based ISSR and RAPD markers assay

  • Hassan, Wazid;Nath, B. Surendra
    • International Journal of Industrial Entomology and Biomaterials
    • /
    • v.30 no.1
    • /
    • pp.6-16
    • /
    • 2015
  • This study established the genetic characterisation of 10 microsporidian isolates infecting non-mulberry silkworms (Antheraea assamensis and Samia cynthia ricini) collected from biogeographical forest locations in the State of Assam, India, using PCR-based markers assays: inter simple sequence repeat (ISSR) and random amplified polymorphic DNA (RAPD). A Nosema type species (NIK-1s_mys) was used as control for comparison. The shape of mature microsporidian spores were observed oval to elongated, measuring 3.80 to $4.90{\mu}m$ in length and 2.60 to $3.05{\mu}m$ in width. Fourteen ISSR primers generated reproducible profiles and yielded 178 fragments, of which 175 were polymorphic (98%), while 16 RAPD primers generated reproducible profiles with 198 amplified fragments displaying 95% of polymorphism. Estimation of genetic distance coefficients based on dice coefficients method and clustering with un-weighted pair group method using arithmetic average (UPGMA) analysis was done to unravel the genetic diversity of microsporidians infecting Indian muga and eri silkworm. The similarity coefficients varied from 0.385 to 0.941 in ISSR and 0.083 to 0.938 in RAPD data. UPGMA analysis generated dendrograms with two microsporidian groups, which appear to be different from each other. Based on Euclidean distance matrix method, 2-dimensional distribution also revealed considerable variability among different identified microsporidians. Clustering of these microsporidian isolates was in accordance with their host and biogeographic origin. Both techniques represent a useful and efficient tool for taxonomical grouping as well as for phylogenetic classification of different microsporidians in general and genotyping of these pathogens in particular.

Neutron Noise Analysis for PWR Core Motion Monitoring (중성자 잡음해석에 의한 PWR 노심 운동상태 감시)

  • Yun, Won-Young;Koh, Byung-Jun;Park, In-Yong;No, Hee-Cheon
    • Nuclear Engineering and Technology
    • /
    • v.20 no.4
    • /
    • pp.253-264
    • /
    • 1988
  • Our experience of neutron noise analysis in French-type 900 MWe pressurized water reactor (PWR) is presented. Neutron noise analysis is based on the technique of interpreting the signal fluctuations of ex-core detectors caused by core reactivity changes and neutron attenuation due to lateral core motion. It also provides advantages over deterministic dynamic-testing techniques because existing plant instrumentation can be utilized and normal operation of the plant is not disturbed. The data of this paper were obtained in the ULJIN unit 1 reactor during the start-up test period and the statistical descriptors, useful for our purpose, are power spectral density (PSD), coherence function (CF), and phase difference between detectors. It is found that core support barrel (CSB) motions induced by coolant flow forces and pressure pulsations in a reactor vessel were indentified around 8 Hz of frequency.

  • PDF

Effect of different air-drying time on the microleakage of single-step self-etch adhesives

  • Moosavi, Horieh;Forghani, Maryam;Managhebi, Esmatsadat
    • Restorative Dentistry and Endodontics
    • /
    • v.38 no.2
    • /
    • pp.73-78
    • /
    • 2013
  • Objectives: This study evaluated the effect of three different air-drying times on microleakage of three self-etch adhesive systems. Materials and Methods: Class I cavities were prepared for 108 extracted sound human premolars. The teeth were divided into three main groups based on three different adhesives: Opti Bond All in One (OBAO), Clearfil $S^3$ Bond (CSB), Bond Force (BF). Each main group divided into three subgroups regarding the air-drying time: without application of air stream, following the manufacturer's instruction, for 10 sec more than manufacturer's instruction. After completion of restorations, specimens were thermocycled and then connected to a fluid filtration system to evaluate microleakage. The data were statistically analyzed using two-way ANOVA and Tukey-test (${\alpha}$ = 0.05). Results: The microleakage of all adhesives decreased when the air-drying time increased from 0 sec to manufacturer's instruction (p < 0.001). The microleakage of BF reached its lowest values after increasing the drying time to 10 sec more than the manufacturer's instruction (p < 0.001). Microleakage of OBAO and CSB was significantly lower compared to BF in all three drying time (p < 0.001). Conclusions: Increasing in air-drying time of adhesive layer in one-step selfetch adhesives caused reduction of microleakage, but the amount of this reduction may be dependent on the adhesive components of self-etch adhesives.

Genetic Diversity and Phylogenetic Relationships among Microsporidian Isolates from the Indian Tasar Silkworm, Antheraea mylitta, as Revealed by RAPD Fingerprinting Technique

  • Hassan, Wazid;Nath, B. Surendra
    • International Journal of Industrial Entomology and Biomaterials
    • /
    • v.29 no.2
    • /
    • pp.169-178
    • /
    • 2014
  • In this study, we investigated genetic diversity of 22 microsporidian isolates infecting tropical tasar silkworm, Antheraea mylitta collected from various geographical forest locations in the state of Jharkhand, India, using polymerase chain reaction (PCR)-based marker assay: random amplified polymorphic DNA (RAPD). A type species, NIK-1s_mys was used as control for comparison. The shape of mature microsporidians was found to be oval to elongate, measuring 3.80 to $5.10{\mu}m$ in length and 2.56 to $3.30{\mu}m$ in width. Of the 20 RAPD primers screened, 16 primers generated reproducible profiles with 298 polymorphic fragments displaying high degree of polymorphism (97%). A total of 14 RAPD primers produced 45 unique putative genetic markers, which were used to differentiate the microsporidians. Calculation of genetic distance coefficients based on dice coefficient method and clustering with un-weighted pair group method using arithmetic average (UPGMA) analysis was conducted to unravel the genetic diversity of microsporidians infecting tasar silkworm. The similarity coefficients varied from 0.059 to 0.980. UPGMA analysis generated a dendrogram with four microsporidian groups, which appear to be different from each other as well as from NIK-1s_mys. Two-dimensional distribution based on Euclidean distance matrix also revealed considerable variability among different microsporidians identified from the tasar silkworms. Clustering of few microsporidian isolates was in accordance with the geographic origin. The results indicate that the RAPD profiles and specific/unique genetic markers can be used for differentiating as well as to identify different microsporidians with considerable accuracy.

Engineering Properties of the Concrete Using Reject Ash as Pre-mixed Fine Aggregate (리젝트애시를 잔골재로 프리믹스하여 활용하는 콘크리트의 공학적 특성)

  • Han, Min-Cheol;Hyun, Seung-Yong
    • Journal of the Korean Recycled Construction Resources Institute
    • /
    • v.7 no.1
    • /
    • pp.44-49
    • /
    • 2019
  • The purpose of this study is to analyze the fundamental characteristics of concrete with the change of reject ash(Reject ash=Rj) in the mixed aggregate where single grain aggregate of different grain size and aggregate of opposite grain size are mixed together, to analyze the possibility of a mixed aggregate system that premixes at an aggregate manufacturing plant and delivers it as one aggregate. As a result of the experimental study, it was found that the grain size regulation is satisfied if the mixed aggregate(CSb+SS) is substituted for about 5% of Rj. In the case of the fluidity slump, slump flow and air volume, it was found that they decrease as the substitution ratio of Rj increases, while the compressive strength increases as the substitution ratio of Rj increases. Therefore, it is analyzed that it would contribute greatly to an improvement of quality such as improvement of compressive strength if adequate fluidity and air quantity are secured by the water reducing agent and AE agent while premixing the Rj, which is disposed of by landfill, with about 5% of the mixed aggregate.

Copper-Based Compounds against Erwinia amylovora: Response Parameter Analysis and Suppression of Fire Blight in Apple

  • Duck Kyu, Ryu;Mahesh, Adhikari;Dong Hyuk, Choi;Kyung Jin, Jun;Do Hyoung, Kim;Chae Ryeong, Kim;Min Kyu, Kang;Duck Hwan, Park
    • The Plant Pathology Journal
    • /
    • v.39 no.1
    • /
    • pp.52-61
    • /
    • 2023
  • Fire blight, caused by Erwinia amylovora, is one of the major bacterial disease of apple and pear, causing enormous economic losses worldwide. Several control measures against E. amylovora have been reported till date, however, none of them have proved to be effective significantly against the pathogen. In this study, mechanisms of the copper-based control agents (CBCAs): copper oxychloride (COCHL), copper oxide (COX), copper hydroxide (CHY), copper sulfate basic (CSB), and tribasic copper sulfate (TCS) and their disease severity reduction efficacy against E. amylovora were analyzed. Bis-1,3-dibutylbarbituric acid trimethine oxonol, carboxyl fluorescein diacetate succinimidyl ester, and 5-cyano-2,3-ditolyl tetrazolium chloride staining were used to check the damage of membrane potential, cytoplasmic pHin, and respiration of CBCAs-treated E. amylovora, respectively. High disturbance in the membrane potential of E. amylovora was found under COX and COCHL treatments. Similarly, higher significant changes in the inner cytoplasmic pHin were observed under COX, COCHL, and TCS treatment. CHY and COCHL-treated E. amylovora showed a significant reduction in respiration. In vitro bioassay results revealed that CHY, CSB, and TCS at 2,000 ppm reduced the severity of fire blight both in pre- and post-treatment of CBCAs in immature apple fruits and seedlings. Overall, the most effective CBCAs against E. amylovora could be CHY at 2,000 ppm as its showed inhibition mechanisms and disease severity reduction.

An Index Structure for Main-memory Storage Systems using The Level Pre-fetching

  • Lee, Seok-Jae;Yoon, Jong-Hyun;Song, Seok-Il;Yoo, Jae-Soo
    • International Journal of Contents
    • /
    • v.3 no.1
    • /
    • pp.19-23
    • /
    • 2007
  • Recently, several main-memory index structures have been proposed to reduce the impact of secondary cache misses. In mainmemory storage systems, secondary cache misses have a substantial effect on the performance of index structures. However, recent studies still stiffer from secondary cache misses when visiting each level of index tree. In this paper, we propose a new index structure that minimizes the total amount of cache miss latency. The proposed index structure prefetched grandchildren of a current node. The basic structure of the proposed index structure is based on that of the CSB+-Tree, which uses the concept of a node group to increase fan-out. However, the insert algorithm of the proposed index structure significantly reduces the cost of a split. The superiority of our algorithm is shown through performance evaluation.