• 제목/요약/키워드: CRS test

검색결과 68건 처리시간 0.023초

Q10 더미를 이용한 어린이용 안전장치 동적 성능 평가 (A Study on Child Restraints System for Q10 dummy in frontal sled test)

  • 김승기;오형준
    • 자동차안전학회지
    • /
    • 제7권1호
    • /
    • pp.13-19
    • /
    • 2015
  • Recently, Child safety has become one of the issue with Q10 dummy representing large child. The objective of this paper was to evaluate performance of three child restraints system (backless booster, high-back booster and without booster) by changing D-ring location in the rear seat. Sled tests were carried out with a Q 10 in 64km/h frontal impact. Before the dynamic sled tests, we assessed dummy positioning with difference in CRS types and height adjustment positions. Dynamic sled test results indicated that there is different performance of CRS types and belt routing. These test results will use as base line data for development CRS safety performance for Q 10.

CRS시험에 의한 2차압밀계수의 결정방법 제안 (A New Proposed Technique for a Secondary Consolidation Coefficient Based on the Constant Rate of Strain Test)

  • 김형주;이민선;이용주;김대우
    • 한국지반공학회논문집
    • /
    • 제20권8호
    • /
    • pp.113-121
    • /
    • 2004
  • 본 연구는 사전압밀재하공법에 의해 연약지반을 개량시 재하-제하-재재하와 같은 다양한 응력변화에 의한 2차압밀량을 추정하고자, 일정변형률 압밀시험기(CRS)를 응용한 일정재하시험장치(CLR)와 표준압밀시험기를 이용한 단계 재하시험(IL)에 의해 군산점토의 압밀특성을 비교 고찰하였다. 또한 CRS시험 후 임의 팽창시점에서 재재하시 유효과압밀비에 따른 2차압밀특성과 간극비-유효응력-시간관계 등을 파악하였다. 군산점토는 유효 과압밀비가 클수록 팽창량은 크고 2차압밀 침하량은 작게 발생하고 있으며, 일시에 하중 제거 후, 재하하는 경우에서 2차압밀계수 $C'_{\alpha}$ 는 완속제거시 보다 작게 평가되고, 유효 과압밀비가 1.4이상인 경우는 유사한 값을 제시하고 있다. 재재하시 발생되는 전체침하량을 기준으로 한 2차압밀계수 $C"_{\alpha}$는 경과시간에 따라 비선형적으로 증가하나 최종값은 급속제거시와 비교하여 유사한 값을 제시하고 있다. 간극비 변형속도는 재하시간이 증가할수록 유효 과압밀비에 관계없이 2개의 시험 모두 일정한 선형관계이고, 유효 과압밀비가 증가할수록 작게 나타나고 있다.고 있다.

Interpretation of coefficient of consolidation from CRS test results

  • Jia, Rui;Chai, Jinchun;Hino, Takenori
    • Geomechanics and Engineering
    • /
    • 제5권1호
    • /
    • pp.57-70
    • /
    • 2013
  • Constant rate of strain (CRS) consolidation tests were conducted for undisturbed Ariake clay samples from three boreholes in Saga Plain of Kyushu Island, Japan. The coefficients of consolidation ($c_{\nu}$) were interpreted from the CRS test results by small- and large-strain theory. Large-strain theory was found to interpret smaller $c_{\nu}$ values and less strain rate effect on $c_{\nu}$ than that by small-strain theory. Comparing the theoretical strain distributions within a soil specimen to those obtained by numerical simulation shows that the small-strain theory can be used only for the dimensionless parameter $c_{\nu}/\dot{\varepsilon}H_0^2{\geq}50$ (where $\dot{\varepsilon}$ is strain rate and $H_0$ is the specimen height), and the large-strain theory can be used for a larger range of strain rates. Applying the criterion to undisturbed Ariake clay with a $c_{\nu}$ value of about $1{\times}10^{-7}\;m^2/s$, it is suggested that the large-strain theory should be adopted for calculating the $c_{\nu}$ value when $\dot{\varepsilon}$ > 0.03%/min.

Diffusion of Cosmic Rays in a Multiphase Interstellar Medium Shocked by a Supernova Remnant Blast Wave

  • Roh, Soonyoung;Inutsuka, Shu-ichiro;Inoue, Tsuyoshi
    • 천문학회보
    • /
    • 제40권2호
    • /
    • pp.38.1-38.1
    • /
    • 2015
  • Supernova remnants (SNRs) are one of the most energetic astrophysical events and are thought to be the dominant source of Galactic cosmic rays (CRs). A recent report on observations of gamma rays from the vicinity of SNRs have shown strong evidence that Galactic CR protons are accelerated by the shock waves of the SNRs. The actual gamma-ray emission from pion decay should depend on the diffusion of CRs in the interstellar medium. In order to quantitatively analyze the diffusion of high-energy CRs from acceleration sites, we have performed test particle numerical simulations of CR protons using a three-dimensional magnetohydrodynamics (MHD) simulation of an interstellar medium swept-up by a blast wave. We analyse the CRs diffusion at a length scale of order a few pc, and show the Richtmeyer-Meshkov instability can provide enough turbulence downstream of the shock to make the diffusion coefficient close to the Bohm level for energy larger than 30 TeV for a realistic interstellar medium.

  • PDF

실내시험을 통한 양산점토의 투수특성 평가 (Evaluation of Permeability Characteristics of Yangsan Clay by Laboratory Tests)

  • 김동휘;김진원;임형덕;김대규;이우진
    • 한국지반공학회논문집
    • /
    • 제17권4호
    • /
    • pp.249-257
    • /
    • 2001
  • 본 논문에서는 경남 양산지역의 퇴적층에서 채취한 불교란 시료를 이용하여 표준압밀시험($IL_{CON}$)과 일정변형률(CRS, Constant Rates of Strain) 압밀시험을 수행한 후 각각의 시험결과를 분석하여 양산점토의 투수특성을 고찰하였다. 이를 위하여 투수계수와 간극비의 관계를 Kozeny(1927)와 Carman(1956) 이후 제안된 많은 연구결과와 비교, 검토하였으며, 시료를 연직방향으로 성형하여 CRS 시험을 수행한 후 횡방향투수계수를 산정하여 양산점토의 투수계수의 이방성을 살펴보았다. CRS시험 결과, 직접적으로 정상류를 발생시켜 누수계수를 측정하는 Rowe cell 시험에 비하여 상대적으로 투수계수의 이방성이 과소평가되는 경향을 보였다. 또한 현장 투수계수에 영향을 미치는 요소들을 살펴보고, 깊이에 따른 투수계수를 고찰하였다.다.

  • PDF

일정변헝률 및 표준압밀시험을 이용한 해성점토의 압밀특성 연구 (Study on the Consolidation Characteristics of Marine Clay by CRS and Conventional Tests)

  • 이우진;임형덕;이원제
    • 한국지반공학회지:지반
    • /
    • 제14권4호
    • /
    • pp.47-60
    • /
    • 1998
  • 본 연구에서는 남해안 해성점토의 일정변형률 압밀특성을 파악하기 위해 표준압밀시첩과 변형률 속도가 다른 일정변형율 압밀시험을 수행하고 이들 결과를 비교.분석하였다. 표준압밀시험 및 일정변형율 시험에서 선행압밀하중을 산정하기 위하여 여러 제안된 방법을 사용하였으며 각 방법의 적용성을 검토하였다. 또한, 변형률 속도가 응력-변형뮬 관계, 간극수압, 그리고 선행압밀 하중에 미치는 영향을 분석하였다. 해석결과에 의하면 압밀곡선의 분포와 선행압밀하중비($a_2=\sigma'_{pCRS}/\sigma'_{pConv}$)는 변형률 속도의 영향을 받지만, 정규압 밀구간의 압축지수는 상대적으로 변형률 속도의 크기와 무관한 것으로 나타났다. 해성점토의 선행압밀하중비는 변형률 속도의 대수축척에 비례하여 증가하는 것으로의 변형률 속도에서 평균적으로 1.11~1.30의 분포를 보였다. 일정변형률 압밀시험에서 간극수압비는 변형플 속도가$6.67\times10^{-4}$ %sec일 때를 제외하고는 6.0%를 초과하지 않는 것으로 나타났다. 정규압밀구간의 압축지수, 압밀계수와 투수계수는 각각 0.59~0.95, $0.56\times10^{-3}~3.0\times10^{-3} cm^2/sec,\; 그리고 \;2.0\times10^4~7.0\times10^{-4} cm/sec$의 분포를 보였다.

  • PDF

일정변형률(CRS) 시험에서의 압밀특성 (Consolidation Characteristics at the Constant Rate of Strain(CRS) Test)

  • 이달원;김시중
    • 농업과학연구
    • /
    • 제37권3호
    • /
    • pp.491-499
    • /
    • 2010
  • This study was carried out to investigate the consolidation characteristics of the remolded clay by the oedometer and the constant rate of strain(CRS) consolidation tests. As the rate of strain increases, the settlement rapidly decreased. As the ratio of the sand in the specimen increases, its effect on the rate of strain to the settlement was reduced. As the effective stress increased, the void ratio decreased, while the rate of strain increased, it did not show a clear variation. The reduction of the void ratio was shown to be less than the oedometer test. The coefficient of vertical consolidation with effective stress showed very large variation around preconsolidation stress, but the rate of strain did not provide significant effects. The rate of strain with effective stress gradually decreased at all tests and mixed ratio of sand. The rate of strain at the constant rate of strain tests showed smaller than in the oedometer test. The coefficient of consolidation at the constant rate of strain tests showed much more increase than in the oedometer test. The ratio of the vertical coefficient of consolidation by the odometer and the constant rate of strain tests showed a large difference according to various tests method and mixing ratio. Therefore, it is recommended that careful attention should be paid to designing the soft ground improvement.

표면 에너지 원리를 이용한 칩실 포장의 초기 점착력 특성 연구 (Study on Early Adhesive Characteristic of Chip Seals Using a Surface Energy Approach)

  • 임정혁
    • 한국도로학회논문집
    • /
    • 제17권6호
    • /
    • pp.47-54
    • /
    • 2015
  • PURPOSES : The objective of this study is to evaluate the early adhesive characteristic of asphalt emulsions, including polymer-modified emulsions, for chip seals using the surface energy concept, the bitumen bond strength (BBS) test, and the Vialit test. METHODS : Two general methods, the BBS test and Vialit test, were applied to investigate the bond strength and the aggregate loss, respectively. A new theory, the surface free energy (SFE) theory, was used to evaluate the adhesive characteristic between the emulsion and the aggregate. Based on the theory, the contact angles were measured, and then the surface energy components were calculated. Using those components, the work of adhesion (Wa) was calculated for each emulsion. To ensure reliable results, all the tests were performed under the same conditions, i.e., at $25^{\circ}C$ for 240 minutes of curing time. For the materials, three emulsions (CRS-2, CRS-2L, and CRS-2P) and one aggregate type (granite) were employed. RESULTS AND CONCLUSIONS : Under the same conditions, the modified emulsions showed better adhesive characteristics and curing behaviors than the unmodified emulsions. In addition, there was no significant difference between the various modified emulsions. One of the important findings is that the analysis by Wa presents more sensitive results than other methods. The results of the Wa showed that the CRS-2P emulsion has the best adhesive characteristics. Consequently, the use of modified emulsions for chip seals could prevent aggregate loss and allow open traffic earlier.

척수손상 환자를 위한 병원기반 사회복귀지원 프로그램의 개발 및 효과 (The Effects and Development of a Hospital Based Community Reintegration Support Program for Patients with Spinal Cord Injury)

  • 호승희;유소연;김예순;방문석;이범석;김동아;김은주;김현경
    • 재활복지공학회논문지
    • /
    • 제9권2호
    • /
    • pp.89-103
    • /
    • 2015
  • 본 연구는 척수손상 환자를 대상으로 병원기반 사회복귀 지원프로그램을 개발하고, 프로그램 시행 전 후를 비교 분석함으로써 프로그램의 효과성을 평가하고자 하였다. 재활병원에 입원해 있는 25명의 척수손상 환자를 대상으로 2~3개월 동안 일주일에 2번 평균 6.1개의 프로그램을 실시하였다. 프로그램 시행 전, 후 COPM, HADS, AD-R, WHOQOL-BREF를 통해 작업 수행도 및 만족도, 불안과 우울, 장애수용, 삶의 질을 비교하였으며, 퇴원 시 CIQ로 지역사회통합 수준과 퇴원 후의 사회복귀여부를 측정하였다. 자료분석은 기술통계와 대응표본 t검정(paired t-test)을 실시하였다. 연구결과 병원기반 사회복귀 지원프로그램 실시 후 작업 수행도 및 만족도, 장애수용, 삶의 질에 향상을 보였다(p<0.05). 또한 퇴원 후 25명의 척수손상 환자 중에서 10명이 가정, 학업, 직업으로 복귀하였다. 이를 통해 병원기반 사회복귀 지원프로그램이 척수손상 환자들이 퇴원 후 그들이 속한 지역사회로 돌아가는데 효과적임을 알 수 있었다. 척수손상 환자들이 가정과 사회로의 빠른 복귀를 위해서는 사회복귀를 위한 다양한 프로그램 개발과 더불어 체계적인 사회복귀 연계시스템이 이루어져야 할 것으로 사료된다.

  • PDF

일정변형률 압밀시험을 이용한 방사 내측배수 압밀해석 (Constant Rate of Strain Consolidation Test for Radially Inward Drainage)

  • 윤찬영;정충기;양봉근
    • 대한토목학회논문집
    • /
    • 제26권5C호
    • /
    • pp.333-342
    • /
    • 2006
  • 본 연구에서는 방사내측배수 조건하에서 일정변형률 압밀시험을 실시할 수 있는 실내시험용 압밀실을 개발하였다. 또한 이를 분석하고 관련 압밀특성을 결정할 수 있는 이론해를 제안하였다. 성형 카올리나이트를 이용하여 개발된 시험기에 의한 방사내측 일정변형률 압밀시험과 더불어 비교 대상이 되는 방사내측배수, 연직배수와 방사외측배수에 대한 단계재하 압밀시험과 방사외측배수 및 연직배수 일정변형률 시험을 실시하였다. 이를 통하여 개발된 방사내측배수 일정변형율 시험기의 결과들이 타 실험방법의 결과들과 일치할 뿐만 아니라, 시료 교란 효과가 줄어든 안정적이고, 신뢰성 높은 결과를 제시하는 것을 확인하였다.