• 대한수학회논문집
• /
• 제29권1호
• /
• pp.131-140
• /
• 2014

In this paper we investigate (n+1)($n{\geq}3$)-dimensional contact CR-submanifolds M of (n-1) contact CR-dimension in a complete simply connected Sasakian space form of constant ${\phi}$-holomorphic sectional curvature $c{\neq}-3$ which satisfy the condition h(FX, Y)+h(X, FY) = 0 for any vector fields X, Y tangent to M, where h and F denote the second fundamental form and a skew-symmetric endomorphism (defined by (2.3)) acting on tangent space of M, respectively.

• 천문학회지
• /
• 제56권1호
• /
• pp.117-124
• /
• 2023

A Forbush decrease (FD) is a depression of cosmic ray (CR) intensity observed by ground-based neutron monitors (NMs). The CR intensity is thought to be modulated by the heliospheric magnetic structures including the interplanetary coronal mass ejection (ICME) surrounding the Earth. The different magnitude of the decreasing in intensity at each NM was explained only by the geomagnetic cutoff rigidity of the NM station. However, sometimes NMs of almost the same cutoff rigidity in northern and southern hemispheres observe the asymmetric intensity depression magnitudes of FD events. Thus, in this study we intend to see the effects on CR intensity modulation of FD event recorded at different NMs due to different ICME propagation directions as an additional parameter in the model explaining the CR modulation. Fortunately, since 2006 the coronagraphs of twin spacecraft of the STEREO mission allow us to infer the propagation direction of ICME associated with the FD event in 3-dimension with respect to the Earth. We suggest the hypothesis that the asymmetric CR modulations of FD events are determined by the propagation directions of the associated ICMEs.

• Journal of Mechanical Science and Technology
• /
• 제15권10호
• /
• pp.1417-1422
• /
• 2001

Since fracture surface presents clear evidence to describe the circumstances of material failure event, analysis of fracture surface should provide plenty of useful information for failure prevention. Thus if we extract proper information from the fracture surface, the safety evaluation, for plant component could be more accurate. In general, the chaotic morphology of fracture surface is determined by the degree of material degradation as well as by other factors such as type of load, geometry of specimen, notch condition, microstructure of material and environment. In this research, we developed a fractal analysis technology for the fracture surface of aged turbine rotor steel based on the slit-island technique using an image analyzer. Moreover the correlation between the fractal dimension and the aging time was studied.

• 대한치과보철학회지
• /
• 제62권2호
• /
• pp.113-122
• /
• 2024

연령 증가에 따른 치아의 점진적인 마모는 자연적인 현상이나 생리적인 정도를 넘어 과도하게 발생하게 되면 수직 고경 상실, 교합 부조화, 악관절 질환, 치수병변 등을 일으킬 수 있어 보철물 수복이 필요하며, 이 때 적절한 수직 고경 거상과 함께 중심위(Centric Relation, CR)에서의 안정적인 교합 설정이 중요하다. 본 증례는 이 악물기와 이갈이 습관이 있는 74세 남환이 과도한 치아 마모를 주소로 내원하였고 이에 악간 거리, 마모 정도, 발음, 안모 평가 등을 시행한 결과 4 mm 수직 고경 거상을 동반한 전악 고정성 보철 수복을 진행하기로 하였다. 또한 비기능 하악 운동으로 인해 반복 재현성이 크게 떨어진 최대교두간 접촉위(Maximum Intercuspal Position, MICP)를 중심위에서의 안정적인 교합과 전‧측방 유도 시 상호보호교합이 되도록 적절히 형성해 주었다. 4개월간 임시 수복물에 적응한 것을 확인한 후 최종 보철물을 제작하였고 이후 4개월간 관찰한 결과 기능 및 심미적으로 결과를 만족하였기에 이를 보고하고자 한다.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2000년도 춘계학술발표회 초록집
• /
• pp.1-1
• /
• 2000

The results of the modification of metal materials treated by high temperature pulst:d plasma fluxes (HTlPPF) with a specific power of incident flux changing in the $(3...100)10^5{]\;}W/cm^2$ range and a pulse duration lying from 15 to $50{\;}\mu\textrm{s}$ have been presented. The results of HTPPF action were studied on the stainless steels of 18Cr-l0Ni, 16Cr- 15Ni, 13Cr-2Mo types; on the structural carbon steels of (13...35)Cr, St. 3, St. 20, St. 45 types; on the tool steels of U8, 65G, ShHI5 types, and others; on nickel and high nickel alloy of 20Cr-45Ni type; on zirconium- and vanadium-base alloys and other materials. The microstructure and properties (mechanical, tribological, erosion, and other properties) of modified materials and surface alloying of metals exposed to HTPPF action have been investigated. It was found that the modification of materials by HTPPF resulted in a simultaneous increase of several properties of the treated articles: microhardness of the surface and layers of 40...60 $\mu\textrm{m}$ in depth, tribological characteristics (friction coefficient, wear resistance), mechanical properties ({\sigma_y}, {\;}{\sigma_{0.2}}.{\;}{\sigma_r}) on retention of the initial plasticity ($\delta$), corrosion resistance, radistanation erosion under ion irradiation, and others. The determining factor of the changes observed is the structural-phase modification of the near-surface layers, in particular, the formation of the fine cellular structure in the near-surface layers at a depth of $20{\;}{\mu\textrm{m}}$ with dimension of cells changing in the range from 0.1 to $1., 5{\;}\mu\textrm{m}$, depending on the kind of material, its preliminary treatment, and the parameters of plasma fluxes. The remits obtained have shown the possibility of purposeful surface alloying of metals exposed to HTPPF action over a depth up to 20...45 $\mu\textrm{m}$ and the concentration of alloying element (Ni, Cr, V) up to 20 wt.%. Possible industrial brunches for using the treatment have been also considered, as well as some results on modifying the serial industrial articles by HTPPF.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제9권11호
• /
• pp.4387-4404
• /
• 2015

The energy-efficient design of sensing-based spectrum sharing of a multi-input and multi-output (MIMO) cognitive radio (CR) system with imperfect multiple antenna spectrum sensing is investigated in this study. Optimal resource allocation strategies, including sensing time and power allocation schemes, are studied to maximize the energy efficiency (EE) of the secondary base station under the transmit power and interference power constraints. EE problem is formulated as a nonlinear stochastic fractional programming of a nonconvex optimal problem. The EE problem is transformed into its equivalent nonlinear parametric programming and solved by one-dimension search algorithm. To reduce searching complexity, the search range was founded by demonstration. Furthermore, simulation results confirms that an optimal sensing time exists to maximize EE, and shows that EE is affected by the spectrum detection factors and corresponding constraints.

• 대한수학회지
• /
• 제40권3호
• /
• pp.517-561
• /
• 2003

We establish a link between the study of completely integrable systems of partial differential equations and the study of generic submanifolds in $\mathbb{C}$. Using the recent developments of Cauchy-Riemann geometry we provide the set of symmetries of such a system with a Lie group structure. Finally we determine the precise upper bound of the dimension of this Lie group for some specific systems of partial differential equations.

• Earthquakes and Structures
• /
• 제8권2호
• /
• pp.423-442
• /
• 2015

The effects of accidental eccentricity on the seismic response of four-storey steel buildings laterally stabilized by buckling restrained braced frames are studied. The structures have a square, symmetrical footprint, without inherent eccentricity between the center of lateral resistance (CR) and the center of mass (CM). The position of the bracing bents in the buildings was varied to obtain three different levels of torsional sensitivity: low, intermediate and high. The structures were designed in accordance with the seismic design provisions of the 2010 National Building Code of Canada (NBCC). Three different analysis methods were used to account for accidental eccentricity in design: (1) Equivalent Static Procedure with static in-plane torsional moments assuming a mass eccentricity of 10% of the building dimension (ESP); (2) Response Spectrum Analysis with static torsional moments based on 10% of the building dimension (RSA-10); and (3) Response Spectrum Analysis with the CM being displaced by 5% of the building dimension (RSA-5). Time history analyses were performed under a set of eleven two-component historical records. The analyses showed that the ESP and RSA-10 methods can give appropriate results for all three levels of torsional sensitivity. When using the RSA-5 method, adequate performance was also achieved for the low and intermediate torsional sensitivity cases, but the method led to excessive displacements (5-10% storey drifts), near collapse state, for the highly torsionally sensitive structures. These results support the current provisions of NBCC 2010.

• 구강회복응용과학지
• /
• 제20권2호
• /
• pp.95-107
• /
• 2004

물론 과학적인 연구가 더 필요하겠지만, 적절한 교합고경은 주위 저작근과 조화를 이루면서, 최적의 기능을 발휘할 수 있어야 하며, 오랜기간 일정하게 유지를 할 수 있는 위치여야 한다. 가끔은 높아진(길어진) 치관 때문에 근육기능에 직접 영향을 미치거나, 치아나 주변지지 조직에 유해한 영향을 미치기도 한다. 적절한 교합고경을 찾기 위한 방법으로 rest position만을 활용하는 것은 상당히 조심할 필요가 있다. 자세나 개인에 따라서 freeway space가 상당히 가변적이기 때문이다. 연하작용 또한 근신경계의 기능에 중요한 역할을 하지만, 정상적인 범주를 찾기란 쉽지 않다. 그러므로 이런 경우에는, 환자가 스스로 생리적으로 적응할 수 있는 방법과 기간을 부여해 줄 필요가 있다. 레진 임시수복물의 일시적 사용이 그 해결책이 될 수 있다. 가철성 혹은 고정성 형태를 판단하는 것은 환자의 치료 범주에 따라 달라질 수 있을 것이다.

• 구강회복응용과학지
• /
• 제30권3호
• /
• pp.238-245
• /
• 2014

무치악 환자에서 기능적으로 우수하고 심미적으로 만족스러운 의치 제작을 위해서는 상, 하악 교합관계, 즉 교합수직 고경과 중심위를 정확하게 결정해야 한다. 수직관계를 결정할 때에는 근육, 상, 하악 치열궁간 거리와 상, 하악 치조제의 평행도 등 여러 요소들이 고려되어야 한다. 또한, 중심위는 모든 하악 운동이 시작되는 재현 가능한 위치로서 기록하는 과정 역시 의치 제작에 매우 중요하다. 만일 이러한 악간관계 채득시 오차가 생기면 결과적으로 제작한 의치가 불편하게 된다. Gothic arch tracer와 같은 트레이싱을 이용하는 방법은 술자가 쉽게 교합수직고경과 중심위를 찾아내고 기록할 수 있는 좋은 방법으로 안정적인 교합수직고경에서 하악의 운동위를 얻기에 유리하다.