Browse > Article
http://dx.doi.org/10.12989/eas.2015.8.2.423

Torsional effects in symmetrical steel buckling restrained braced frames: evaluation of seismic design provisions  

Roy, Jonathan (Department of Civil, Geological and Mining Engineering, Ecole Polytechnique, University of Montreal)
Tremblay, Robert (Department of Civil, Geological and Mining Engineering, Ecole Polytechnique, University of Montreal)
Leger, Pierre (Department of Civil, Geological and Mining Engineering, Ecole Polytechnique, University of Montreal)
Publication Information
Earthquakes and Structures / v.8, no.2, 2015 , pp. 423-442 More about this Journal
Abstract
The effects of accidental eccentricity on the seismic response of four-storey steel buildings laterally stabilized by buckling restrained braced frames are studied. The structures have a square, symmetrical footprint, without inherent eccentricity between the center of lateral resistance (CR) and the center of mass (CM). The position of the bracing bents in the buildings was varied to obtain three different levels of torsional sensitivity: low, intermediate and high. The structures were designed in accordance with the seismic design provisions of the 2010 National Building Code of Canada (NBCC). Three different analysis methods were used to account for accidental eccentricity in design: (1) Equivalent Static Procedure with static in-plane torsional moments assuming a mass eccentricity of 10% of the building dimension (ESP); (2) Response Spectrum Analysis with static torsional moments based on 10% of the building dimension (RSA-10); and (3) Response Spectrum Analysis with the CM being displaced by 5% of the building dimension (RSA-5). Time history analyses were performed under a set of eleven two-component historical records. The analyses showed that the ESP and RSA-10 methods can give appropriate results for all three levels of torsional sensitivity. When using the RSA-5 method, adequate performance was also achieved for the low and intermediate torsional sensitivity cases, but the method led to excessive displacements (5-10% storey drifts), near collapse state, for the highly torsionally sensitive structures. These results support the current provisions of NBCC 2010.
Keywords
earthquakes; symmetry; buckling restrained braced frames; accidental eccentricity; torsional sensitivity;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 Anagnostopoulos, S.A., Alexopoulou, C. and Stathopoulos, K. (2010), "An answer to an important controversy and the need for caution when using simple models to predict inelastic earthquake response of buildings with torsion", Earthq. Eng. Struct. Dyn., 39(5), 521-540.   DOI
2 ASCE (2010), Minimum design loads for buildings and other structures, ASCE Standard ASCE/SEI 7-10, American Society of Civil Engineers, Reston, VA.
3 Basu, D., Constantinou, M.C. and Whittaker, A.S. (2014), "An equivalent accidental eccentricity to account for the effects of torsonial ground motions on structures", Eng. Struct., 69, 1-11.   DOI
4 CEN (2004), EN 1998-1, Eurocode 8: Design of Structures for Earthquake Resistance. Part I: General rules, seismic actions and rules for buildings, Brussels, Belgium.
5 Chopra, A.K. and De la Llera, J.C. (1994), "Accidental and natural torsion in earthquake response and design of buildings", 11th World Conference on Earthquake Engineering, Acapulco, Mexico.
6 CSA. (2009), CSA-S16-09, Limit States Design of Steel Structures, Canadian Standards Association, Mississauga, ON, Canada.
7 DeBock, D.J., Liel, A.B., Haselton, C.B., Hooper, J.D. and Henige, R.A. (2013), "Importance of seismic design accidental torsion requirements for building collapse capacity", Earthq. Eng. Struct. Dyn., 43(6), 831-850.   DOI
8 De-la-Colina, J., Benitez, B., and Ruiz, S. (2011), "Accidental eccentricity of story shear for low-rise office buildings", J. Struct. Eng., ASCE, 137(4), 513-520.   DOI
9 Erduran, E. and Ryan, K.L. (2011), "Effects of torsion on the behavior of peripheral steel-braced frame systems", Earthq. Eng. Struct. Dyn., 40, 491-507.   DOI
10 Falamarz-Sheikhabadi, M.R. and Ghafory-Ashtiany, M. (2012), "Approximate formulas for rotational effects in earthquake engineering", J. Seismology, 16(4), 815-827.   DOI
11 Humar, J., Yavari, S. and Saatcioglu, M. (2003), "Design for forces induced by seismic torsion", Canadian Journal of Civil Engineering, 30(2), 328-337.   DOI
12 INN (2009), NCh433.Of1996 - Modificada en 2009, Diseno sismico de edificios, El Instituto Nacional de Normalizacion, Santiago, Chile.
13 Kyrkos, M.T. and Anagnostopoulos, S.A. (2011a), "An assessment of code designed, torsionally stiff, asymmetric steel buildings under strong earthquake excitations", Earthq. Struct., 2(2), 109-126.   DOI
14 Kyrkos, M.T. and Anagnostopoulos, S.A. (2011b), "Improved earthquake resistant design of torsionally stiff asymmetric steel buildings", Earthq. Struct., 2(2), 127-147.   DOI
15 Kyrkos, M.T. and Anagnostopoulos, S.A. (2013), "Improved earthquake resistant design of eccentric steel buildings", SDEE, 47, 144-156.
16 NRCC (2010), National Building Code of Canada, Associate Committee on the National Building Code, National Research Council of Canada, Ottawa, ON.
17 PEER (2010), Technical report for the PEER ground motion database web application (online), Pacific Earthquake Engineering Research. Available at http://peer.berkeley.edu/peer_ground_motion_database.
18 Romero, P., Reaveley, L.D., Miller, P.J. and Okahashi, T. (2007), "Full Scale Testing of WC Series Buckling Restrained Braces", Department of Civil and Environmental Engineering, University of Utah.
19 Stathopoulos, K.G. and Anagnostopoulos, S.A. (2010), "Accidental design eccentricity: Is it important for the inelastic response of buildings to strong earthquakes?", Soil Dyn. Earthq. Eng., 30(9), 782-797.   DOI   ScienceOn
20 Stathopoulos, K.G. and Anagnostopoulos, S.A. (2005), "Inelastic torsion of multistorey buildings under earthquake excitations", Earthq. Eng. Struct. Dyn., 34(12), 1449-1465.   DOI