• 대한치과기공학회지
• /
• 제27권1호
• /
• pp.97-104
• /
• 2005

The effect of Nb on interfacial bonding characteristics of Ni-Cr alloy for porcelain fused to metal crown (PFM) has been studied in order to investigate oxide layer. A specimens, which is 0.8mm in thickness, were fired at 1,000$^{\circ}C$ with four tests such as air, vacuum, air for 5 minutes and vacuum for 5 minutes in order to examine an oxide behavior of alloy surface generated by the adding of Nb to be controlled at a rate of 0, 1, 3 and 5. It observed oxide film form of the fired specimens with optical microscope and scanning electron microscope (SEM), and chemical formation of them with energy disperse X-ray spectroscopy (EDX). The other specimens, which is 2mm in thickness, were fired at 1,000$^{\circ}C$ with air and vacuum in order to analyze the diffusion behaviors of alloy-porcelain interface by X-ray dot mapping. The results of this study were as follows: 1. The observation of microstructure of specimens by SEM showed that the more Nb content is high, the more much intermediate compound of rich Nb is observed. 2. The surface morphology of oxide film is most dense in 3% Nb. The heat treatment in air constitutes denser oxide film than heat treatment under vacuum. 3. The diffusion behavior of oxide layer by X-ray dot mapping showed that Si, Al of porcelain diffuse toward metal.

• 한국균학회소식:학술대회논문집
• /
• 한국균학회 2015년도 춘계학술대회 및 임시총회
• /
• pp.38-38
• /
• 2015

Throughout the world, clubroot disease is one of the most damaging diseases affecting Brassica oleracea. In order to perform QTL analysis of CR (clubroot resistance) loci in B. oleracea, we constructed a map, and analyzed CR-QTLs using the mean phenotypes of F3 progenies from the cross of a resistant double-haploid cabbage line (Anju) with a susceptible double-haploid broccoli line (GC). We identified one major QTL, pb-Bo(Anju)1 in C2 from Anju and four minor QTLs; pb-Bo(GC)1 in O5 from GC, pb-Bo(Anju)2, -3, -4 in C2, C3, and C7 from Anju, respectively. Additionally, we found that the accumulation of Pb-Bo(Anju)1 allele and the minor CR-QTLs is essential for resistance against various six isolates. Our finding markers closely linked to the CR-QTLs will help marker-assisted selection for CR. At present, we are undergoing toward map-based cloning for Pb-Bo(Anju)1 gene. The preliminary experiment delimited Pb-Bo(Anju)1 locus, encompassing among 450kB.

• 한국전산구조공학회논문집
• /
• 제30권1호
• /
• pp.1-6
• /
• 2017

본 논문에서는 비교적 최근 정립된 co-rotational 이론을 기반으로 한 4절점 평면요소 정식화를 확장하여 9절점 평면 요소에 적합한 CR 정식화를 제시하고자 한다. 그리고 등방성 재료의 소성 해석을 위해, 선형 경과 규칙(bi-linear hardening rule)을 바탕으로 하는 Newton-Raphson return-mapping 알고리즘을 적용하였다. 이때, von Mises 기준을 적용하여 소성 변형 상태를 예측하였다. Lagrange 승수를 도입하여 2차원 접촉에 대한 구속조건을 부여하였다. 개발한 요소는 상용프로그램인 ABAQUS 해석결과와 비교 검증하였다.

• 한국균학회소식:학술대회논문집
• /
• 한국균학회 2015년도 춘계학술대회 및 임시총회
• /
• pp.29-29
• /
• 2015

Clubroot disease is caused by the soil-born obligate plant pathogen Plasmodiophora brassicae. This pathogen can infect all cruciferous vegetables and oil crops, including Brassica rapa, B. oleracea, B. napus, and other Brassica species. Clubroot disease is now considered to be a major problem in Chinese cabbage production in China, Korea, and Japan. We collected several hundreds of P. brassicae infected galls from Korea, and isolated the single spore from the collection. For establishment of novel isolation, and mass-propagation methods for singe spore isolates of P. brassicae pathogen, we developed new filtration method using both cellulose nitrate filter and syringe filter. Accurate detection of P. brassicae pathogen in the field was done by using real-time PCR in the potential infested soil. When we tested the different pathogenicity on commercial Chinese cabbage varieties, P. brassicae from collected galls showed various morphological patterns about clubroot symptom on roots. To date, 8 CR loci have been identified in the B. rapa genome using the quantitative trait loci (QTL) mapping approach, with different resistant sources and isolates. We are trying to develop the molecular marker systems for detect all 8 CR resistant genes. Especially for the study on the interaction between pathogens and CR loci which are not well understood until now, genome wide association studies are doing using the sequenced inbred lines of Chinese cabbage to detect the novel CR genes.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2007년도 추계종합학술대회
• /
• pp.281-284
• /
• 2007

A realization for image distortion correction processing system with DSP processor is presented in this paper. The image distortion correcting algorithm is realized by DSP processor for focusing on more real time processing than image quality. The lens and camera distortion coefficients are processed by YCbCr Lookup Tables and the correcting algorithm is applied to reverse mapping method for geometrical transform. The system experimentation results in the processing time about 34.6 msec on $720{\times}480$ curved image at 150 degree visual range.

• 호남수학학술지
• /
• 제39권1호
• /
• pp.1-25
• /
• 2017

In this paper, we introduce a new scheme namely: CUIA-iterative scheme and utilize the same to prove a strong convergence theorem for quasi contractive mappings in Banach spaces. We also establish the equivalence of our new iterative scheme with various iterative schemes namely: Picard, Mann, Ishikawa, Agarwal et al., Noor, SP, CR etc for quasi contractive mappings besides carrying out a comparative study of rate of convergences of involve iterative schemes. The present new iterative scheme converges faster than above mentioned iterative schemes whose detailed comparison carried out with the help of different tables and graphs prepared with the help of MATLAB.

• 대한화학회지
• /
• 제31권6호
• /
• pp.567-575
• /
• 1987

한국산 고대유리 시료 45종을 입수하여 그속에 함유된 19종의 원소(Ag, As, Br, Ce, Co, Cr, Eu, Fe, Hf, K, La, Lu, Na, Ru, Sb, Sc, Sm, Th, Zn)는 중성자방사화분석에 의하고, Pb는 원자흡수분광분석법에 의해 각각 정량하였다. 이들 20종 원소의 분석데이타를 사용하여 원소 상호간의 상관관계를 상관메트릭스법으로 검토하였다. 그리고 주성분분석법으로 각 시료의 농도분포를 평면에 나타내었으며, 측정된 제조년대 및 발굴위치가 같은 시료가 모이면 이들 시료를 SIMCA를 위한 참조시료로 삼았다. 이들 참조시료 및 시험시료를 SIMCA에 의해 분류하였더니 참조시료 전부와 시험시료중 3종이 주성분분석법에 의한 분류결과와 일치하였다.

• 자원환경지질
• /
• 제54권2호
• /
• pp.213-232
• /
• 2021

Ore criteria at the Sheba Deposit indicate orogenic mineralization type. Rocks and mineral assemblages suggest low formation-temperature of green-schist facies. Pyrite found in two generations; Type1 is irregular grains, contains higher arsenic and gold contents, compared to the relatively younger phase Type2 pyrite, which is composed of euhedral grains, found adjacent to late quartz-carbonate veins or at rims of type1 pyrite. Two gold generations were identified; type1 found included in sulphides (mainly pyrite). The second gold type was remobilized (secondary) into free-lodes within silicates (mainly quartz). Gold fineness is high, as gold contains up to 95 wt. % Au, Ag up to 3.5 wt. %, and traces of Cu, Ni, and Fe. Pyrite type2 contains tiny mineral domains (rich in Al, Mn, Hg, Se, Ti, V, and Cr). Zoning, and replacement textures are common, suggesting multiple mineralization stages. The distribution and relationships of trace elements in pyrite type2 indicate three formation patterns: (1) Al, Mn, Hg, Se, Ti, V, Cr, and Sn are homogeneously distributed in pyrite, reflecting a synchronous formation. (2) As, Ni, Co, Zn, and Sb display heterogeneous distribution pattern in pyrite, which may indicate post-formation existence due to other activities. (3) Au and Ag show both distribution patterns within pyrite, suggesting that gold is found both in microscopic phases and as chemically bounded phase.

• 환경영향평가
• /
• 제31권4호
• /
• pp.214-225
• /
• 2022

본 연구는 사업시행이 환경에 미치는 부정적 영향을 최소화할 수 있는 방안을 강구하기 위해 환경영향평가 토양 부문을 강조하였다. 영향평가 절차에 대한 일련의 노력으로서 도시개발사업을 대상으로 하는 국가 인벤토리 기반 데이터베이스를 구축하였으며, 세 가지 기계학습 모델 성능 평가 및 토양오염물질 농도분포 매핑을 진행하였다. 여기에서, 가장 우수한 성능을 보여준 Random Forest 모델을 사용하여 대한 민국 수도권 지역을 대상 9가지 토양오염물질을 매핑하였다. 본 연구의 결과는 도시화가 가장 활발한 서울지역에서 아연(Zn), 불소(F) 및 카드뮴(Cd) 농도가 상대적으로 우려되는 것을 발견하였다. 또한, 수은(Hg)과 크롬(Cr6+)의 경우 농도가 기준 이하로 검출되었는데, 이는 중금속 농도에 영향을 미치는 산업 및 공업단지와 같은 오염원 부족이 원인으로 도출되었다. 토양오염물질 공간분포 매핑을 통해 토양특성 및 토지이용 유형과 오염물질 간의 유의한 상관관계를 유추하였다. 이를 통해 사업 현장 위치에 관한 토양오염 최소화 및 계획 결정에 대한 효율적인 토양관리 방안을 구축할 수 있을 것으로 기대한다.

• 대한금속재료학회지
• /
• 제48권6호
• /
• pp.523-532
• /
• 2010

Co-application of organic coating and cathodic protection has not provided enough durability to low-alloyed steels inseawater ballast tank (SBT) environments. An attempt has made to study the effect of alloy elements (Al, Cr, Cu, Mo, Ni, Si, W) on general and localized corrosion resistance of steels as basic research to develop new low-allowed steels resistive to corrosion in SBT environments. For this study, we measured the corrosion rate by the weigh loss method after periodic immersion in synthetic seawater at $60^{\circ}C$, evaluated the localized corrosion resistance by an immersion test in concentrated chloride solution with the critical pH depending on the alloy element (Fe, Cr, Al, Ni), determined the permeability of chloride ion across the rust layer by measuring the membrane potential, and finally, we analyzed the rust layer by EPMA mapping and compared the result with the E-pH diagram calculated in the study. The immersion test of up to 55 days in the synthetic seawater showed that chromium, aluminium, and nickel are beneficial but the other elements are detrimental to corrosion resistance. Among the beneficial elements, chromium and aluminium effectively decreased the corrosion rate of the steels during the initial immersion, while nickel effectively decreased the corrosion rate in a longer than 30-day immersion. The low corrosion rate of Cr- or Al-alloyed steel in the initial period was due to the formation of $Cr_2FeO_4$ or $Al_2FeO_4$, respectively -the predicted oxide in the E-pH diagram- which is known as a more protective oxide than $Fe_3O_4$. The increased corrosion rate of Cr-alloyed steels with alonger than 30-day exposure was due to low localized corrosion resistance, which is explained bythe effect of the alloying element on a critical pH. In the meantime, the low corrosion rate of Ni-alloyed steel with a longer than 30-day exposure wasdue to an Ni enriched layer containing $Fe_2NiO_4$, the predicted oxide in the E-pH diagram. Finally, the measurement of the membrane potential depending on the alloying element showed that a lower permeability of chloride ion does not always result in higher corrosion resistance in seawater.