• The Journal of Korean Association of Computer Education
• /
• v.20 no.4
• /
• pp.47-57
• /
• 2017

The purpose of this study is to verify the effectiveness of a CT-CPS(Computational Thinking-based Creative Problem Solving) instructional model on the cognitive and the affective area of middle school students' software class. To achieve our goal, we explored theoretical background and designed a lesson plan based on CT-CPS instructional model. Then we analyzed our experimental results after applying the lesson plan to middle school students. We performed our experiment to an experimental group by using our CT-CPS instructional model-based lesson plans, and we carried out three pre and post tests about cognitive and affective area, i.e. creative problem solving ability, meta cognition and motivation of learning. As a result, most of the test factors were statistically improved, so the effectiveness of the CT-CPS instructional model on the cognitive and the affective area of middle school students' software class was verified.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2020.01a
• /
• pp.281-283
• /
• 2020

본 연구는 2015년 교육과정에 명시된 정보교과의 운영방침과 중등학교 소프트웨어 교육 현황을 분석하고, 이에 대한 문제점을 해결 할 수 있는 방안으로 창의적 문제 해결력을 통한 소프트웨어 교육 모형을 제안한다. 창의적 문제 해결력은 확산적 사고와 수렴적 사고를 통해 학생들이 문제 해결에 필요한 사고를 키울 수 있는 모형이다. 이에 본 논문에서는 컴퓨팅 사고력을 가진 창의·융합 인재 육성이라는 소프트웨어의 교육 목표를 달성하기 위해 기존의 CPS모형과 CT의 요소간의 유사점을 확인하고 이를 바탕으로 새로운 CPS-SW 모형을 제안한다. CPS-SW 모형으로 컴퓨팅 사고력과 창의적 문제해결력을 키울 수 있으며, 이를 통해 미래 사회에 필요한 인재육성을 위한 소프트웨어 교육의 발전에 기여하고자 한다. 또한 CPS-SW 모형을 적용할 수 있는 프로그램과 학생들이 창의적 문제해결력을 키울 수 있는 학습에 대한 연구가 필요할 것으로 예상한다.

• Journal of IKEEE
• /
• v.22 no.1
• /
• pp.6-13
• /
• 2018

To develop highly dependable CPS, M&S(modeling and simulation) is very important. It is not easy to model any CPS whole system in a single simulation tool because each simulation tool is optimized for modeling each different part of the CPS. The FMI is the standard for M&S between different simulation tools. The DDS is a communication middleware suitable for large-scale real-time data transmission. In this paper, we proposed FMI based CPS real-time distributed simulaton framework using DDS. To evaluate the performance of the proposed framework, we performed distributed simulation using IEEE HLA/RTI and OMG DDS middleware and measured and compared the execution time of the entire simulation. From the simulation results, we can confirm that the simulation execution time using DDS is at least 1.14 times faster compared to execution time using HLA/RTI.

• Journal of Information Processing Systems
• /
• v.14 no.6
• /
• pp.1361-1384
• /
• 2018

Recently, Cyber Physical System (CPS) is one of the core technologies for realizing Internet of Things (IoT). The CPS is a new paradigm that seeks to converge the physical and cyber worlds in which we live. However, the CPS suffers from certain CPS issues that could directly threaten our lives, while the CPS environment, including its various layers, is related to on-the-spot threats, making it necessary to study CPS security. Therefore, a survey-based in-depth understanding of the vulnerabilities, threats, and attacks is required of CPS security and privacy for IoT. In this paper, we analyze security issues, threats, and solutions for IoT-CPS, and evaluate the existing researches. The CPS raises a number challenges through current security markets and security issues. The study also addresses the CPS vulnerabilities and attacks and derives challenges. Finally, we recommend solutions for each system of CPS security threats, and discuss ways of resolving potential future issues.

• International Journal of Computer Science & Network Security
• /
• v.24 no.5
• /
• pp.40-52
• /
• 2024

Cyber-Physical Systems (CPS) are introduced as complex, interconnected systems that combine physical components with computational elements and networking capabilities. They bridge the gap between the physical world and the digital world, enabling the monitoring and control of physical processes through embedded computing systems and networked communication. These systems introduce several security challenges. These challenges, if not addressed, can lead to vulnerabilities that may result in substantial losses. Therefore, it is crucial to thoroughly examine and address the security concerns associated with CPS to guarantee the safe and reliable operation of these systems. To handle these security concerns, different existing security requirements methods are considered but they were unable to produce required results because they were originally developed for software systems not for CPS and they are obsolete methods for CPS. In this paper, a Security Requirements Engineering Methodology for CPS (CPS-SREM) is proposed. A comparison of state-of-the-art methods (UMLSec, CLASP, SQUARE, SREP) and the proposed method is done and it has demonstrated that the proposed method performs better than existing SRE methods and enabling experts to uncover a broader spectrum of security requirements specific to CPS. Conclusion: The proposed method is also validated using a case study of the healthcare system and the results are promising. The proposed model will provide substantial advantages to both practitioners and researcher, assisting them in identifying the security requirements for CPS in Industry 4.0.

• Journal of KIISE
• /
• v.45 no.1
• /
• pp.36-44
• /
• 2018

Due to the advent of the 4th Industrial Revolution, it is imperative that we aggressively continue to develop state-of-the-art, cutting edge ICT technology relative to autonomous vehicles, intelligent robots, and so forth. Especially, systems based on convergence IT are being developed in the form of CPSs (Cyber Physical Systems) that interwork with sensors and actuators. Since conventional CPS specification only expresses behavior of one system, specification for collaboration and diversity of CPS systems with characteristics of hyper-connectivity and hyper-convergence in the 4th Industrial Revolution has been insufficiently presented. Additionally, behavioral modeling of CPSs that considers more collaborative characteristics has been unachieved in real-time application domains. This study defines the non-functional requirements that should be identified in developing embedded software for real-time constrained collaborating CPSs. These requirements are derived from ISO 25010 standard and formally specified based on state-based timed process. Defined non-functional requirements may be reused to develop the requirements for new embedded software for CPS, that may lead to quality improvement of CPS.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.11C
• /
• pp.1152-1157
• /
• 2002

In this paper, a detailed procedure of development for an AAL2 processor widely used in voice gateway application is introduced. The processor supports CPS and SSCS with voice service and framed mode data service. It provides 4 ATM virtual connections, which include 1020 AAL2 channels. The processor has one UTOPIA Level 1 interface for an ATM cell interface and 4 TDM ports for a voice channel interface. The TDM ports carry PCM/ADPCM voice streams. Most AAL2 processors are implemented as software, or hardware and software, so its latency is large. But this processor has very low latency as to CPS and SSCS because all of them are implemented in hardware. Also, it allows not only loopback and switching of CPS packets, but loopback and switching of TDM channels. The key feature is that the internal structure of the CPS and SSCS in this processor seems like as each software function, so they are called whenever they are required. In addition, they are reusable for another design and are scalable for more channels.

• The Journal of Information Systems
• /
• v.26 no.4
• /
• pp.63-85
• /
• 2017

Purpose Recently, much attention in building smart factory has dramatically increased with an emergence of the Industry 4.0. As we noted a connectivity gap between main concerns of MIS and the automated manufacturing systems such as POP and MES, it is recommended that CPS (Cyber-Physical System) can be an important building block for the smart factory and enrich the depth of MIS knowledge. Therefore, first, this study attempted to identify the connectivity gap between the traditional field of MIS (ERP, SCM, CRM, etc.) and the automated manufacturing systems, and then recommended CPS as a technical bridge to fill the gap. Secondly, we studied concepts and research trend of CPS that is believed to be a virtual mechanism to manage manufacturing systems in an integrated manner. Finally, we suggested research and educational opportunities in MIS based on the CPS perspectives. Design/methodology/approach Since this paper introduced relatively new idea of CPS originally discussed in the field of engineering, traditional MIS research method such as survey and experiment may not fit well. Therefore this research collected technical cases through literature survey in engineering fields, video clips from Youtube, and field references from various ICT Exhibitions and Conventions. Then we analyzed and reorganized them to highlight the necessity of CPS and draw some insight to share with MIS academia. Findings This paper introduced CPS to bridge the connectivity gap between the traditional MIS and automated manufacturing system (smart factory), a concern far away from the MIS academia. Further, this paper suggested future research subjects of MIS such as developing software to share big production data and systems to support manufacturing decisions, and innovating MIS curricula including smart and intelligent manufacturing technology within the context of traditional enterprise systems.

• Journal of Digital Contents Society
• /
• v.19 no.2
• /
• pp.293-300
• /
• 2018

This study explored the security of Industry 4.0 such as security trends and security threats in Industry 4.0, and security system in Industry 4.0. The threat elements in Industry 4.0 are changing from ICT to IoT and to CPS security, so security paradigm and security System should change accordingly. In particular, environmental and administrative security are more important to solve CPS security. The fourth industry-age security should change to customized security for individual systems, suggesting that the security technology that combines hardware and software in product production design should change from the beginning of development. The security system of the fourth industry proposes design and implementation as a CPS security system as a security system that can accommodate various devices and platforms from a security system in a single system such as a network to an individual system.

• Journal of Institute of Control, Robotics and Systems
• /
• v.9 no.3
• /
• pp.242-250
• /
• 2003

We propose the monitoring system scheme for the CPS/INS integrated navigation system. The design requirements of the monitoring system are suggested and the software scheme based on GUI is proposed. The proposed monitoring system consists of an I/O interface part, a navigation data display part, and a post-processing part. The I/O interface part is responsible for data communication between the monitoring system and a navigation computer unit. The navigation data display part provides various display methods to show the navigation data to user in real-time. The post-processing part collects the navigation data to analyze the performance of navigation system. The proposed monitoring system software was developed using the Visual C++ programming language and a van test was carried out to demonstrate the real-time operation of the monitoring system. The test result shows that the proposed monitoring system can be effectively applied to the CPS/INS integrated navigation system.