• 농업과학연구
• /
• 제4권2호
• /
• pp.317-343
• /
• 1977

분종류(盆種類)에 따른 수분증발량(水分蒸發量), 분내토양온도(盆內土壤溫度) 및 토양공기조성(土壤空氣組成)의 차(差)를 조사(調査)하고, 이들 조건(條件)이 분식물(盆植物)의 생육(生育)에 미치는 영향(影響)을 구명(究明)하기 위해 본(本) 실험(實驗)을 수행(遂行)하였다. 분종류(盆種類)는 토분(土盆)(CP), 도자기분(盆)(POP), 프라스틱분(盆)(PLP)을 사용(使用)하였으며, 토분(土盆)을 사용(使用)할 경우 수분증발량(水分蒸發量)을 감소시키기 위한 방법(方法)으로서 토분외벽(土盆外壁)에 녹색(綠色)페인트를 칠한 것(CP-P), 투명(透明)니스를 칠한 것(CP-V), 토분내면(土盆內面)에 polyethylene film을 깐 것(CP-PI) 및 토분(土盆)의 분토표면(盆土表面)을 흑색(黑色) polyethylene film으로 피복한 것(CP-PM) 등을 사용(使用)하였다. 공시식물(供試植物)로서는 봉선화, 국화(菊花), 코스모스, 양담장이, 제라늄, 코키아, 만수국(萬壽菊), 엽모단(葉牡丹) 및 샐비어등(等)을 사용(使用)하였다. 1. PLP, POP, CP-P, CP-V 및 CP-PI에서 자란 식물(植物)은 CP에서 자란 식물(植物)보다 건물중(乾物重)이 무거웠다. 2. 모든 공시식물(供試植物)의 초장(草長)은 PLP, POP, CP-P, CP-V 및 CP-PI에서는 CP에서 보다 컸다. 3. Geranium의 엽수(葉數)는 PLP, POP, CP-P 및 CP-V는 CP에 비(比)해 많았다. 4. Balsam의 전생육기간중(全生育期間中)의 개화수(開花數)는 PLP, CP-P, POP, CP-V 및 CP-PI는 CP에 비(比)해 많았다. Marigold는 balsam과 비슷한 경향(傾向)을 나타내었으며, salvia는 화수수(花穗數)는 차(差)가 없으나 화수장(花穗長) 및 소화수(小花數)는 balsam 및 marigold의 개화수(開花數)와 동일(同一)한 경향(傾向)을 나타내었다. 5. PLP와 POP의 1일(日) 평균(平均) 증발량(蒸發量)은 CP의 약(約) 43%였으며, CP는 총증발량(總蒸發量)의 2/3가 벽면(壁面)을 통(通)해 증발(蒸發)되었다. 6. 분(盆)으로부터의 수분증발율(水分蒸發率)은 PLP, POP, CP-P, CP-V, CP-PI, CP-PM 및 CP의 순으로 늦었으며, 수분함량(水分含量)은 벽면증발(壁面蒸發)이 억제(抑制)된 분(盆)에서 관수(灌水) 1일후(日后)부터 CP보다 많았다. 7. 분토(盆土)의 온도(溫度)는 증발량(蒸發量)이 많은 분(盆)일수록 낮았으며, 분종류(盆種類)에 따른 온도차(溫度差)는 주간(晝間)에는 컷으나 야간(夜間)에는 적었다. 8. 분토중(盆土中)의 산소농도(酸素濃度)는 무공성분(無孔性盆)이 CP에 비(比)해 약간 낮았고, 그 차이(差異)는 0.40~1.2%였으며, 산소농도(酸素濃度)의 범위는 17.95~19.62%였다. 탄산(炭酸)깨스농도(濃度)는 무공성분(無孔性盆)이 토분(土盆)보다 높았으며, 농도(濃度)범위는 0.59~1.76%였는데 이 범위의 공기조성(空氣組成)은 식물생육(植物生育)에 아무런 영향을 미치지 않았다. 9. 분토(盆土)의 수분함량(水分含量)과 식물생육간(植物生育間)에는 정(正)의 상관(相關)을 나타내었다. 10. CP에 재배(栽培)한 식물(植物)은 PLP에 재배(栽培)한 식물(植物)보다 지상부중(地上部中)의 총질소함량(總窒素含量)이 약간 많았으며 C/N율(率)이 다소 낮은 경향(傾向)을 나타내었다. 이러한 결과(結果)로 보아 분내토양공기중(盆內土壤空氣中)의 산소(酸素) 및 탄산(炭酸)깨스농도(濃度)는 분식물(盆植物)의 생육(生育)을 조해(阻害)할 정도로 낮아지거나 높아지지 않아서 분식물(盆植物)의 생육(生育)에 영향(影響)을 미치지 않으며, 벽면증발량(壁面蒸發量)의 다소(多少)에 따른 분내토양중(盆內土壤中)의 수분함량(水分含量)의 변화(變化)가 분식물(盆植物)의 생육(生育)에 가장 큰 영향(影響)을 미치므로 무공성분(無孔性盆)의 이용(利用)은 특(特)히 우리나라에서 관수노력(灌水勞力)을 절약(節約)할 수 있어서 생산비절감(生産費節減)을 가져올 수 있다.

• 한국영어학회지:영어학
• /
• 제4권2호
• /
• pp.117-149
• /
• 2004

The paper is to argue against the asymmetric CP-V2 analysis of Old English, according to which finite verbs invariably undergo movement into a clause-final T within subordinate clauses and reach the functional head C within main clauses. The asymmetric CP-V2 analysis, first of all, faces difficulty in explaining a wide range of post-verbal elements within subordinate clauses. To resolve the problem, the analysis has to abandon the obligatoriness of V-to-T movement or introduce various types of extraposition whose status is dubious as a legitimate syntactic operation. Obligatory V-to-T movement in Old English lacks conceptual justification as well. Crosslinguistic evidence reveals that morphological richness in verbal inflection cannot entail overt verb movement. Moreover, the operation is always string-vacuous under the asymmetric CP- V2 analysis and has no effect at the interfaces, in violation of the principle of economy. The distribution of Old English finite verbs in main clauses also undermines the asymmetric CP-V2 analysis. Conceptually speaking, a proper syntactic trigger cannot be confirmed to motivate obligatory verb movement to C. The operation not only gets little support from nominative Case marking, the distribution of expletives, or complementizer agreement but also requires the unconvincing stipulation that expletives as well as sentence-initial subjects result from string-vacuous topicalization. Finally, textual evidence testifies that Old English sometimes permits non-V2 ordering patterns, many of which remain unexplained under the asymmetric CP-V2 analysis.

• 한국언어정보학회:학술대회논문집
• /
• 한국언어정보학회 2002년도 Language, Information, and Computation Proceedings of The 16th Pacific Asia Conference
• /
• pp.205-216
• /
• 2002

ECM across a CP in Korean poses difficulties from the standpoint of the locality of A-movement/agreement. A phase-based analysis is developed which requires two steps: (i) in the embedded CP, VP/VP containing its VP-internal subject first moves to Spec-CP, which renders the subject accessible to the matrix v, in accordance with Chomsky's Phase Impenetrability Condition; (ii) ECM takes place in a local relation between the matrix v and the embedded subject. It is shown that the otherwise puzzling fact that ECM across a CP, but not Passivization across a CP, is affected by the type of the embedded verb in Korean is accounted for in a principled way, based on the assumption that CP and CP, but not TP and VP, are phases.

• 대한치과기공학회지
• /
• 제30권1호
• /
• pp.25-31
• /
• 2008

Cp-Ti and Ti-6Al-4V alloys commonly used dental implant materials, particularly for orthopaedic and osteosynthesis because of its suitable mechanical properties and excellent biocompatibility. This alloys have excellent corrosion behavior in the clinical environment. The first factor to decide the success of dental implantation is sufficient osseointegration and high corrosion resistance between on implant fixture and its surrounding bone tissue. In this study, in order to increase corrosion resistance and biocompatibility of Cp-Ti and Ti-6Al-4V alloy that surface of manufactured alloy was coated with TiN by RF-magnetron sputtering method. The electrochemical behavior of TiN coated Cp-Ti and Ti-6Al-4V alloy were investigated using potentiodynamic (EG&G Co, PARSTAT 2273. USA) and potentiostatic test (250mV) in 0.9% NaCl solution at 36.5 $\pm$ 1$^{\circ}C$. These results are as follows : 1. From the microstructure analysis, Cp-Ti showed the acicular structure of $\alpha$-phase and Ti-6Al-4V showed the micro-acicular structure of ${\alpha}+{\beta}$ phase. 2. From the potentiodynamic test, Ecorr value of Cp-Ti and Ti-6Al-4V alloys showed -702.48mV and -319.87mV, respectively. Ti-6Al-4V alloy value was higher than Cp-Ti alloy. 3. From the analysis of TiN and coated layer, TIN coated surface showed columnar structure with 800 nm thickness. 4. The corrosion resistance of TiN coated Cp-Ti and Ti-6Al-4V alloys were higher than those of the non-coated Ti alloys in 0.9% NaCl solution from potentiodynamic test, indicating better protective effect. 5. The passivation current density of TiN coated Cp-Ti and Ti-6Al-4V alloys were smaller than that of the noncoated implant fixture in 0.9% NaCl solution, indicating the good protective effect resulting from more compact and homogeneous layer formation.

• 한국환경과학회지
• /
• 제28권9호
• /
• pp.729-735
• /
• 2019

The aim of this study was to determine the effects of different compositions of environmental substrates on hydroponic tomato cultivation. Three different substrates were used in coir chip:dust (v/v=50:50; CP1), coir chip:dust (v/v=80:20; CP2), and rock wool cube with CP2 (CPR). The amount of irrigation during the cultivation period was 190 mL/(plant time) in all substrates. The pH and EC were 5.8-6.2 and 2.6-2.9 dS/m, respectively. The drainage rate in CP1 was 31%, in CP2 was 36%, and in CPR was 29%. The growth of tomato plants in terms of height was higher in CP1 and CPR. The leaf area was greater in CP2. The fresh and dry weights were greater in CP2 and CPR treatments. The net photosynthesis in CP2 ($19.31{\mu}mol\;CO_2/m^2s$) and root activity in CP2 were higher among all three treatments. The soluble solid content of fruit was not significantly different among treatments. The yield per plant in CP2 and CPR treatments was 17% greater than the yield per plant in CP1. Therefore, the most suitable substrate for hydroponic tomato cultivation is the substrate mixed with coir chip:dust (v:v=80:20; CP2), i.e., CPR.

• 한국정보전자통신기술학회논문지
• /
• 제13권5호
• /
• pp.359-369
• /
• 2020

본 논문에서는 CMOS X-Ray 검출기의 메인 클럭을 발생시키는 위상 고정 루프(phase locked loop, PLL)을 위한 전류 불일치를 줄이면서도 넓은 동작 범위를 가지는 전하 펌프(charge pump, CP) 회로를 제안하였다. CP 회로의 동작 범위와 전류 불일치는 CP 회로를 구성하는 전류원 회로의 동작 범위와 출력 저항에 의해서 결정된다. 제안된 CP 회로는 넓은 동작 범위를 확보하기 위한 wide operating 전류 복사 바이어스 회로와 전류 불일치를 줄이기 위한 출력 저항이 큰 캐스코드 구조의 전류원으로 구현하였다. 제안된 wide operating range 캐스코드 CP 회로는 350nm CMOS 공정을 이용하여 칩으로 제작되었으며 소스 측정 장치(source measurement unit)을 활용하여 전류 일치 특성을 측정하였다. 이때 전원 전압은 3.3V이고 CP 회로의 전류 ICP=100㎂이었다. 제안된 CP 회로의 동작 범위 △VO_Swing=2.7V이고 이때 최대 전류 불일치는 5.15%이고 최대 전류 편차는 2.64%로 측정되었다. 제안된 CP 회로는 낮은 전류 불일치 특성을 가지면서 광대역 주파수 범위에 대응할 수 있으므로 다양한 클럭 속도가 필요한 시스템에 적용할 수 있다.

• 한국식품영양학회지
• /
• 제25권4호
• /
• pp.737-746
• /
• 2012

본 연구는 mushroom complete medium(MCM) 액체배지에 수삼 추출물(GE, $65^{\circ}Bx$)을 첨가하여 면역활성이 증진된 노루궁뎅이버섯(Hericium erinaceum) 균사체를 배양하고, 균사체로부터 활성다당성분을 분획하고자 하였다. MCM에 대하여 GE를 5, 10과 15%(v/v) 첨가한 액체배지에서 균사체를 배양하고, 각각의 조다당획분(HE-GE-5-CP, HE-GE-10-CP와 HE-GE-15-CP)으로 분획하여 면역활성을 측정한 결과, HE-GE-10-CP는 HE-GE-5-CP와 HE-GE-15-CP보다 높은 활성을 나타내었으며, GE를 첨가하지 않은 MCM에서 배양된 균사체 조다당획분(HE-CP)보다 유의적으로 증진된 면역활성을 나타내었다. 또한, HE-GE-10-CP의 DEAE-Sepharose CL-6B 분획물 중 가장 높은 활성을 나타낸 HE-GE-10-CP-II획분은 대조군인 HE-CP의 어떠한 획분보다도 유의적으로 높은 면역활성과 암 전이 억제활성을 나타내었다. 한편, 활성획분인 HE-GE-10-CP-II는 arabinose, rhamnose, galactose, glucose와 uronic acid(molar ratio; 0.34:0.26:0.99:1.00:0.39)로 구성되어 있으나, 대조군인 HE-CP의 동일용매 용출획분으로서 HE-GE-10-CP-II보다는 활성이 낮은 HE-CP-II는 fucose, mannose, galactose와 glucose(molar ratio; 0.32:0.55:1.00:0.96)를 함유하여 다른 구성당 분포를 나타내었다. 따라서 노루궁뎅이버섯 균사체 액체배양에서 수삼 추출물 첨가는 균사체의 구성당 변화를 통한 면역활성 증진에 관여하는 것으로 사료되어 기능성 소재 개발에 유용할 것으로 사료된다.

• Journal of Applied Biological Chemistry
• /
• 제62권4호
• /
• pp.347-353
• /
• 2019

Stings of jellyfish, which frequently occur in a warm season, cause severe pain, inflammation and sometimes irreversible results such as the death. Harmful venoms from jellyfish, therefore, have been studied for finding the therapeutic agents to relieve pain or to neutralize toxic components. However, it is still unclear if and how jellyfish venom reveal neuronal toxicity even though pain induction seems to result from the activation of nociceptors such as nerve endings. In this study, using HT-22 cell line, we investigated neurotoxic effects of the venom of Chrysaora pacifica (CpV) which appears in South-East ocean of Korea. In 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide assay, CpV significantly reduced the viability of HT-22 cells in a dose-dependent manner. Additionally, in 2',7'-Dichlorofluorescin diacetate fluorescence test under the culture condition lacking dominant inflammatory factors, CpV remarkably increased the production of intracellular reactive oxygen species (ROS). Reduced responsive fluorescence to Rhodamine123 and increased expression of intracellular cytochrome c were also observed in HT-22 cells treated with CpV. These indicate that CpV-reduced viability of HT-22 cells may be due to the activation of apoptotic signalings mediated with oxidative stress and mitochondrial dysfunction. Furthermore, removing Ca²⁺ ion or adding N-acetyl-Lcystein remarkably blocked the CpV effect to reduce the viability of HT-22 cells. The findings in this study clearly demonstrate that CpV may activate Ca²⁺-mediated ROS signalings and mitochondrial dysfunction resulting in neuronal damage or death, and suggest that blocking Ca²⁺ pathway is a therapeutic approach to possibly block toxic effects of jellyfish venoms.

• Journal of Periodontal and Implant Science
• /
• 제26권1호
• /
• pp.143-160
• /
• 1996

The purpose of this study was to evaluate the response in aspect of attachment and growth rate of osteoblasts and growth rate of osteoblasts and human gingival fibroblasts to the commercially pure titanium(CP titanium)and titanium alloy(Ti-6AI-4V) that are used widely as implant materials, and to obtain the basic information to ideal implant materials. In the studly, commercially pure titanium in first test group, titanium alloy(Ti-6AI-4V) in second test group, cobalt-chrome-molybdenum alloy(Co-Cr-Mo alloy) in positive control group, and tissue culture polystyrene plate in negative control group were used. The results of this study were as follows. 1. Bone marrow cells cultured on CP titanium and Ti-6Al-4V showed significantly greater attachment and growth rate(p(0.05) compared to Co-Cr-Mo alloy in each time. 2. There were no significant differences(p>0.05) in attachment and growth rate of bone marrow cells cultured on CP titanium and Ti-6AI-4V or tissue culture plate. 3. Most bone marrow cells cultured on CP titanium, Ti-6Al-4V and tissue culture plate were attached well to each substratum in first 2days, and then, grew at higher growth rate. On the other hand, some cells cultured on Co-Cr-Mo alloy failed to attach in first 2 days, and then, attached cells grew at lower growth rate than other groups. 4. Attachment and growth rates of gingival fibroblasts cultured on CP titanium and Ti-6Al-4V showed no significant differences(p>0.05) compared to Co-Cr-Mo alloy in 2 days, but significantly greater increase(p<0.05) in 5 and 9 days. 5. There were no significantly differences(p>0.05) between growth rates on gingival fibroblasts cultured on CP titanium, Ti-6Al-4V and tissue culture plate in 2 and 5days, but a significant lower growth rate(p<0.05) on CP titanium and Ti-6Al-4V versus tissue culture plate. 6. Some gingival fibroblasts cultured on all specimen groups failed to attach, but attached cells grew well, especially on CP titanium, Ti-GAl-4V and tissue culture plate. 7. There were no significant differences(P>0.05) between growth rates of both bone marrow cells and gingival fibroblasts cultured on CP titanium and Ti-6AI-4V. As a result of this study, both commercially pure titanium and Ti-6AI-4V showed excellent biocompatibility and there was no significant difference in the cellular response to the both metals. Bone marrow cells cultured on each substratum showed significantly greater growth rate and responded sensitively to cytotoxic effects of metal surfaces compared to gingival fibroblasts. Considering cell response to the substrate, it was likely that the composition itself of titanium metals have no significant effect on the biocompatibility. Further study need to be done to evaluate the influence of surface characteristics on cellular responses.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 1994년도 추계학술대회강연 및 발표대회 강연및 발표논문 초록집
• /
• pp.27-27
• /
• 1994