• Journal of KIISE:Computer Systems and Theory
• /
• v.26 no.9
• /
• pp.1177-1184
• /
• 1999

본 논문에서는 스캔플립프롭 선택 시간이 짧고 높은 고장 검출률(fault coverage)을 얻을 수 있는 새로운 부분스캔 설계 기술을 제안한다. 순차회로에서 테스트패턴 생성을 용이하게 하기 위하여 완전스캔 및 부분스캔 설계 기술이 널리 이용되고 있다. 스캔 설계로 인한 추가영역을 최소화 하고 최대의 고장 검출률을 목표로 하는 부분스캔 기술은 크게 구조분석과 테스트 가능도(testability)에 의한 설계 기술로 나누어 볼 수 있다. 구조분석에 의한 부분스캔은 짧은 시간에 스캔플립프롭을 선택할 수 있지만 고장 검출률은 낮다. 반면 테스트 가능도에 의한 부분스캔은 구조분석에 의한 부분스캔보다 스캔플립프롭의 선택 시간이 많이 걸리는 단점이 있지만 높은 고장 검출률을 나타낸다. 본 논문에서는 구조분석에 의한 부분스캔과 테스트 가능도에 의한 부분스캔 설계 기술의 장단점을 비교.분석하여 통합함으로써 스캔플립프롭 선택 시간을 단축하고 고장 검출률을 높일 수 있는 새로운 부분스캔 설계 기술을 제안한다. 실험결과 대부분의 ISCAS89 벤치마크 회로에서 스캔플립프롭 선택 시간은 현격히 감소하였고 비교적 높은 고장 검출률을 나타내었다.Abstract This paper provides a new partial scan design technique which not only reduces the time for selecting scan flip-flops but also improves fault coverage. To simplify the problem of the test pattern generation in the sequential circuits, full scan and partial scan design techniques have been widely adopted. The partial scan techniques which aim at minimizing the area overhead while maximizing the fault coverage, can be classified into the techniques based on structural analysis and testabilities. In case of the partial scan by structural analysis, it does not take much time to select scan flip-flops, but fault coverage is low. On the other hand, although the partial scan by testabilities generally results in high fault coverage, it requires more time to select scan flip-flops than the former method. In this paper, we analyzed and unified the strengths of the techniques by structural analysis and by testabilities. The new partial scan design technique not only reduces the time for selecting scan flip-flops but also improves fault coverage. Test results demonstrate the remarkable reduction of the time to select the scan flip-flops and high fault coverage in most ISCAS89 benchmark circuits.

• Journal of Environmental Impact Assessment
• /
• v.20 no.2
• /
• pp.187-198
• /
• 2011

The objective of this study is to analyze the flora and forest vegetation of trails with high visitor density at Molundae. Nine quadrats of $20{\times}20m$ were selected for the survey. The survey was conducted from April to October 2010. The obtained results are summarized as follows. Plot1, plot2, plot3, plot4, plot6, and plot7 were located at slopes of $5{\sim}20^{\circ}$, 17~40m above sea level, and were formed with the colony of Japanese black pine(Pinus thunbergii Parl) and Japanese black pine(Pinus thunbergii Parl)-white oak(Quercus aliena Blume). Tree layer had the height of 8~20m, and the coverage of 50~70%, while subtree layer had the height of 3-8m, and the coverage 30~80%. On the other hand, shrub layer had the height of 2~4m, and the coverage of 10~30%, and herb had the height of 0.2~1m and coverage 5~20%. Plot5, plot8, and plot9 were located at the summit areas of 57~78m above sea level, and $0^{\circ}$ slope. Japanese black pine(Pinus thunbergii Parl) formed a community there. Tree layer was 8~20m high, and covered 60~70%, of the area, and subtree layer was 6~8m high, and coverage 30~40%. Shrub layer had the height of 2~6m, and the coverage of 30%, while herb layer had the height 0.2~2m, and the coverage 20-80%. Succession does not occur in the surveyed areas which have high visitor density. Artificially planted sawtooth oak(Quercus acutissima) trees were found to disturb succession and formation of multi-layer vegetation, resulting in the ecologically unstable forest. Therefore, the researcher suggested the strategy of managing the vegetation in the conclusion. This study has the limit in that the plots selected for the survey reflected only part of various trails in the Molundae area. It is necessary to suggest the vegetation management plans by selecting more diverse trail areas in consideration of the visitor density and behaviors, and analyzing the changes in vegetation quantitatively in order to manage the vegetation in urban areas damaged by visitors more effectively.

• Journal of Periodontal and Implant Science
• /
• v.39 no.2
• /
• pp.111-118
• /
• 2009

Purpose: The integrity of interproximal hard/soft tissue has been widely accepted as the key determinant for success or degree of root coverage following the connective tissue graft. However, we reason that the gingival biotype of an individual, defined as the distance from the interproximal papilla to gingiva margin, may be the key determinant that influence the extent of root coverage regardless of traditional classification of gingival recession. Hence, the present study was performed with an aim to verify that individual gingival scalloping pattern inherent from biotype influence the level of gingival margin following the connective tissue graft for root coverage. Methods: Test group consisted of 43 single-rooted teeth from 21 patients (5 male and 16 female patients, mean age: 36.6 years) with varying degrees of gingival recession requiring connective tissue graft; 20 teeth of Miller class I and 23 teeth of Miller class III gingival recession, respectively. The control group consisted of contralateral teeth which did not demonstrate apparent gingival recession, and thus not requiring root coverage. For a biotype determination, an imaginary line connecting two adjacent papillae of a test tooth was drawn. The distance from this line to gingival margin at mid-buccal point and this distance (P-M distance) was designated as "gingival biotype" for a given individual. The distance was measured at baseline and 3 to 6 months examinations postoperatively both in test and control groups. The differences in the distance between Miller class I and III were subject to statistical analysis by using Student.s t-test while those between the test and control groups within a given patient were by using paired t-test. Results: The P-M distance at 3 to 6 months postoperatively was not significantly different between Miller class I and Miller class III. It was not significantly different between the test and control group in a given patient, either, both in Miller class I and III. Conclusions: The amount of root coverage following the connective tissue graft was not dependent on Miller's classification, but rather was dependent on P-M distance, strongly implying that the gingival biotype of a given patient may play a critical impact on the level of gingival margin following connective tissue graft.

• Journal of dental hygiene science
• /
• v.15 no.6
• /
• pp.768-774
• /
• 2015

The purpose of this study was to grasp the benefits from pit and fissure sealants and to analyze the factors of influencing the benefit amount by using the raw data of the Korea National Health and Nutrition Examination Survey for 2007~2013 targeting the subjects aged from 6 years in full to 18 years. The analysis was used STATA 11.0. As a result of the analysis, the following conclusions were obtained. It rose up to 1.24 pieces after carrying out the national health insurance coverage from averagely 0.93 piece until the year in 2007~2009 (up to November) when is before enforcing the national health insurance coverage in the pit and fissure sealants. The benefits from pit and fissure sealants depending on general characteristics were surveyed to be higher in the higher income level, in the more subscription to health insurance and private insurance, and in the more toothbrushing frequency per day. The factors that have influence upon the benefits from pit and fissure sealants were shown to include whether or not to have the national health insurance coverage in the pit and fissure sealants, income level, health insurance type and private insurance subscription appearance, and one-day toothbrushing frequency. Synthesizing the results, a rise in the benefits from pit and fissure sealants is shown in 2010 based on December 2009 when the national health insurance coverage in the pit and fissure sealants was implemented, but is showing the tendency of declining again from 2011. To increase the benefits from pit and fissure sealants, it is thought that the schemes will need to be discussed such as reinforcing publicity on the national health insurance coverage in the pit and fissure sealants, expanding a support for low-income bracket, and differentiating the outpatient cost sharing according to socio-economic level.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.48 no.2
• /
• pp.151-159
• /
• 2021

Since January 2019, insurance coverage for caries treatment of permanent teeth using composite resin in children aged 12 and under has started in South Korea. The purpose of this study was to compare the pattern of permanent molar composite resin restoration aged 12 and under before and after the insurance coverage from January 2009 to March 2020 in the Department of Pediatric Dentistry at Kyung Hee University Dental Hospital at Gangdong. Since the insurance coverage was started in 2019, the frequency of permanent molar composite resin restoration aged 12 and under has increased more than twice. There was a significant change in frequency of resin restoration by shape of cavity comparing before and after the insurance coverage, whereas there was no significant difference in changes by patient age, gender and position of tooth. As accessibility to the permanent tooth composite resin restoration is increased by the insurance coverage, which shows a fair survival rate, it is expected that it could be able to secure oral health in the early permanent dentition aged 12 and under.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.8
• /
• pp.15-22
• /
• 2019

Awireless sensor network utilizes small sensors with a low cost and low power being deployed over a wide area. They monitor the surrounding environment and gather the associated information to transmit it to a base station via multi-hop transmission. Most of the research has mainly focused on static sensors that are located in a fixed position. Unlike a wireless sensor network based on static sensors, we can exploit drone-based technologies for more efficient wireless networks in terms of coverage and energy. In this paper, we introduce a transmission power model and a video encoding power model to design the network environment. We also explain a priority mapping scheme, and deploy drones oriented for network coverage and energy consumption. Through our simulations, this research shows coverage and energy improvements in adrone-based wireless sensor network with fewer sensors, compared to astatic sensor-based wireless sensor network. Concretely, coverage increases by 30% for thedrone-based wireless sensor network with the same number of sensors. Moreover, we save an average of 25% with respect to the total energy consumption of the network while maintaining the coverage required.

• Korean Journal of Radiology
• /
• v.25 no.5
• /
• pp.414-425
• /
• 2024

Objective: This study aims to explore the opinions on the insurance coverage of artificial intelligence (AI), as categorized based on the distinct value elements offered by AI, with a specific focus on patient-centered outcomes (PCOs). PCOs are distinguished from traditional clinical outcomes and focus on patient-reported experiences and values such as quality of life, functionality, well-being, physical or emotional status, and convenience. Materials and Methods: We classified the value elements provided by AI into four dimensions: clinical outcomes, economic aspects, organizational aspects, and non-clinical PCOs. The survey comprised three sections: 1) experiences with PCOs in evaluating AI, 2) opinions on the coverage of AI by the National Health Insurance of the Republic of Korea when AI demonstrated benefits across the four value elements, and 3) respondent characteristics. The opinions regarding AI insurance coverage were assessed dichotomously and semi-quantitatively: non-approval (0) vs. approval (on a 1-10 weight scale, with 10 indicating the strongest approval). The survey was conducted from July 4 to 26, 2023, using a web-based method. Responses to PCOs and other value elements were compared. Results: Among 200 respondents, 44 (22%) were patients/patient representatives, 64 (32%) were industry/developers, 60 (30%) were medical practitioners/doctors, and 32 (16%) were government health personnel. The level of experience with PCOs regarding AI was low, with only 7% (14/200) having direct experience and 10% (20/200) having any experience (either direct or indirect). The approval rate for insurance coverage for PCOs was 74% (148/200), significantly lower than the corresponding rates for other value elements (82.5%-93.5%; P ≤ 0.034). The approval strength was significantly lower for PCOs, with a mean weight ± standard deviation of 5.1 ± 3.5, compared to other value elements (P ≤ 0.036). Conclusion: There is currently limited demand for insurance coverage for AI that demonstrates benefits in terms of non-clinical PCOs.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.4
• /
• pp.359-366
• /
• 2009

MATLAB Autocode generation is a feature that converts a block diagram model in Simulink to a c program. Utilizing this function makes MATLAB/Simulink an integrated developing environment, from controller design to implementation. It can reduce development cost and time significantly. However, this automated process requires high reliability on the software, especially the original Simulink block diagram model. And thus, the verification of the codes becomes important. In this study, a UAV flight program which is generated with Simulink is validated and modified according to DO-178B. As a result of applying the procedures, the final program not only satisfied the functional requirement but is also verified with structural point of view with Decision Coverage 93%, Condition Coverage 95% and MC/DC 90%.

• Journal of Periodontal and Implant Science
• /
• v.42 no.3
• /
• pp.105-109
• /
• 2012

Purpose: Soft tissue recessions frequently cause esthetic disharmony and dissatisfaction. Compared with soft tissue coverage around a tooth, the coverage of an implant site is obviously unpredictable. Particularly in the cases of thin mucosa, a significant greater amount of recession takes place compared to thick mucosa. To overcome this problem, this case report demonstrates a two-step mucosal dehiscence coverage technique for an endosseous implant. Methods: A 33-year-old female visited us with the chief complaint of dissatisfaction with the esthetics of an exposed implant in the maxillary left cental incisor region. A partial-thickness pouch was constructed around the dehiscence. A subepithelial connective tissue graft was positioned in the apical site of the implant and covered by a mucosal flap with normal tension. At 12 months after surgery, the recipient site was partially covered by keratinized mucosa. However, the buccal interdental papilla between implant on maxillary left central incisor region and adjacent lateral incisor was concave in shape. To resolve the mucosal recession after the first graft, a second graft was performed with the same technique. Results: An esthetically satisfactory result was achieved and the marginal soft tissue level was stable 9 months after the second graft. Conclusions: The second graft was able to resolve the mucosal recession after first graft. This two-step approach has the potential to improve the certainty of esthetic results.

• Journal of IKEEE
• /
• v.18 no.3
• /
• pp.305-312
• /
• 2014

IIt takes a lot of time and needs the workloads to verify the RTL code used in complex system like a nuclear control system which is required high level reliability using simple testbench. UVM has a layered testbench architecture and it is easy to modify the testbench to improve the code coverage. A test vector can be easily constructed in the UVM, since a constrained random test vector can be used even though the construction of testbench using UVM. We showed that the UVM testbench is easier than the verilog testbench for the analysis and improvement of code coverage.