• Journal of the Korea Institute of Building Construction
• /
• v.14 no.5
• /
• pp.379-388
• /
• 2014

The purpose of this study is to investigate the effect of capsulated slurry phase change material (PCM) on the thermal crack in mass concrete by experimental work and FEM analysis. In this study, three conditions of samples were prepared for evaluating the level of hydration heat, i.e., a material condition, a cement paste condition and a concrete condition. Also, a compressive strength test was conducted for FEM inverse analysis. Based on the results of the experiment, exothermic function coefficients of concrete with encapsulated slurry PCM were deducted by the inverse analysis. After that, they applied to FEM analysis of the mass scale concrete structures. From the results of this experiment, $31^{\circ}C$ capsulated slurry PCM had no super cooling phenomenon in the material condition. In the cement condition, hydration heat decreased by 34.61J when PCM of 1g was mixed. In the concrete condition, PCM of 6% was deducted as the best level in hydration heat absorption. In FEM inverse analysis, rate coefficient of reaction gradually decreased when PCM mixing ratio increased. But, temperature-rise coefficient increased when PCM mixing ratio exceeded 6%. For the inversed exothermic function coefficients applying to large scale concrete structures, a thermal cracking index increased by 0.05 when PCM of 1% was mixed.

• Journal of the Korean earth science society
• /
• v.29 no.7
• /
• pp.579-585
• /
• 2008

The time-dependent evolution of disk mass for outburst limit cycle in a black hole microquasar is calculated based on the non-linear hydrodynamic model of thermally unstable accretion disk. The physical parameters such as black hole mass, disk size and mass transfer rate are adopted to reproduce the historical 1975 outburst observed in a prototype black hole X-ray nova A0620-00. The time-dependent effect of irradiation from the central hot region to the disk is considered in two ways: direct irradiation and indirect irradiation reflected from hot accretion flow above the disk. The accretion disk thermal instability model can account for the bolometric luminosity appropriate to typical characteristics of system luminosity observed in X-ray transients during the whole cycle of the outburst evolution. The maximum mass of the accretion disk, ${\sim}4.03{\times}10^{24}g$, is achieved at the ignition of an outburst, and the minimum value, ${\sim}8.54{\times}10^{23}g$, is reached during the cooling decay to quiescence. The disk mass varies ${\sim}5$ times during outburst limit cycle.

• Journal of Bio-Environment Control
• /
• v.21 no.4
• /
• pp.404-410
• /
• 2012

This study was conducted to examine effects of harvest time (09:00 vs. 14:00), precooling at $4^{\circ}C$ vs. no precooling, and storage temperature (4 vs. $8^{\circ}C$) on the storage life of 'Maehyang' strawberry fruits for export. Fruits at a 60% ripe stage were harvested from a commercial greenhouse in Gyeongsangnamdo, Jinju on May 4, 2010. Fruits were precooled by a forced draft cooling for three hours, transported for about 30 minutes and then stored, immediately. Small precoolers set in the farm were used for precooling. Fruits were placed in constant temperature chamber (4 or $8^{\circ}C$) after packaging using PVC wrap and a cardboard box. Fruits were examined for their changes in weight, hardness, Hunter color values, soluble solids content (SSC), and incidence of gray mold (Botrytis cinerea) during storage at a two days interval from May 6 to May 14, 2010. Hardness and SSC decreased as the ripening stage progressed. The Hunter's 'L' and 'a' value of fruit color decreased as time passed. Also, fresh weight decreased during storage at all temperatures. Soft rot appeared on epidermal tissues and followed by gray mold. Incidence of gray mold was greater at $8^{\circ}C$ storage temperature than in $4^{\circ}C$ storage temperature. However, no difference by the harvested time and precooling. The results indicate that effectiveness for keeping the freshness was best achieved by precooling at $4^{\circ}C$ and storage at $4^{\circ}C$, respectively.

• Journal of Embryo Transfer
• /
• v.18 no.1
• /
• pp.51-59
• /
• 2003

This study was carried out to evaluate the effect of different freezing and thawing rates on the viability, motility and acrosomal changes of frozen canine spermatozoa. The ejaculated semen was extended with Tris-egg yolk buffer containing 8% glycerol and equilibrated for 60 min after cooled to 4$^{\circ}C$ for 58 min. The straws were cryopreserved gradually by slow-cooling at different distance(6, 10 and 17 cm, respectively) from the liquid nitrogen (L$N_2$) to achieve temperature rate of 3, 8.9 and 19$^{\circ}C$ /min. Thawing of the straws was performed in a water bath fur 2 min at 37$^{\circ}C$ and 55$^{\circ}C$ , respectively. The motility of frozen-thawed spermatozoa was assessed by phase-contrast microscopy. To assess their viability and acrosome content, spermatozoa were stained with a vital stain and Fluorescence conjugated lectin Pisum Savitum Agglutinin (FITC/PAS), respectively. Concentration of the ejaculated fresh semen was normal range of 3.44 $\times$ 10$^{8}$ /ml. Freezing temperature were reduced to -110, -70 and -35$^{\circ}C$, as higher distance from liquid nitrogen, 6, 10 and 17 cm, respectively. Freezing at 3$^{\circ}C$/min in distance of 17 cm from liquid nitrogen yielded better motility, viability and rate of intact acrosome than 8.9 or 19$^{\circ}C$/min and the optimal thawing was 37$^{\circ}C$ for 2 min.

• Analytical Science and Technology
• /
• v.15 no.6
• /
• pp.514-520
• /
• 2002

The electrothermal vaporization (ETV) hollow cathode glow discharge atomic emission spectrometer for analysis of liquid sample has been developed and characterized. This system has improved the sample introduction method of electrothermal vaporization and the hollow cathode glow discharge. The sample introduction method was possible to provide high analyte transport efficiency to the plasma by helix coil made of tungsten material. In addition, small volume samples (<$30{\mu}{\ell}$) could be used. The system has glow discharge cell with special design for improvement of precision. The effect of discharge parameters such as discharge power, gas flow rate has been studied to find optimum condition. The emitted light was effectively carried into detector by fiber optic cable in UV region. The calibration curve of Pb, Cd were obtained with 3 samples.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.11
• /
• pp.878-885
• /
• 2012

In this study we aims to examine the co-doping effects of 1/3 mol% $Mn_3O_4+Co_3O_4$ (1:1) on the reaction, microstructure, and electrical properties such as the bulk defects and grain boundary properties of $ZnO-Bi_2O_3-Sb_2O_3$ (ZBS; Sb/Bi=0.5, 1.0, and 2.0) varistors. The sintering and electrical properties of Mn,Co-doped ZBS, ZBS(MCo) varistors were controlled by Sb/Bi ratio. Pyrochlore ($Zn_2Bi_3Sb_3O_{14}$) was decomposed and promoted densification at lower temperature on heating in Sb/Bi=1.0 by Mn rather than Co. Pyrochlore on cooling was reproduced in all systems however, spinel (${\alpha}$- or ${\beta}$-polymorph) did not formed in Sb/Bi=0.5. More homogeneous microstructure was obtained in $Sb/Bi{\geq}1.0$ In ZBS(MCo), the varistor characteristics were improved drastically (non-linear coefficient, ${\alpha}$=30~49), and seemed to form $Zn_i^{..}$(0.17 eV) and $V_o^{\bullet}$(0.33 eV) as dominant defects. From impedance and modulus spectroscopy (IS & MS), the grain boundaries have divided into two types, i.e. the one is tentatively assign to $ZnO/Bi_2O_3(Mn,Co)/ZnO$ (0.47 eV) and the other ZnO/ZnO (0.80~0.89 eV) homojunctions.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.26 no.2
• /
• pp.30-44
• /
• 2013

Objectives : The purpose of this study is to report the causes and the effects of korean medicine treatment on alopecia. Methods : 1050 patients with alopecia, who had visited oriental medical clinics from July 2011 to October 2012, were analyzed by self-assessments. And 153 patients of them were treated with korean medicine treatment for 3 months. Treatment results were evaluated by patients' self-assessments and global & enlarged photographic reviews. Results : 1. The gender ratio of male to female was 2:1 and most patients belonged to the 20~30 year old group. 2. Family history of baldness in alopecia patients was a total of 57.3%, paternal 44.4% and maternal 21.2%. 3. Subjective symptoms of fever in parietal region was a total of 97.4% in alopecia patients. 4. After 1 month treatment, the fever in the parietal region was decreased by 37.3% of patients. And their subjective hair loss was also significantly decreased. 5. After 3 months of treatment, the global photographic review was improved by 56.2% of the patients and the enlarged photographic review was significantly improved by 5.2% in patients' total hair count. Conclusions : A significant number of alopecia patients were young and less relative in genetic alopecia causes was less relevant than the past. Recent causes of alopecia were more concerned with the fever in parietal region. According to that reason, cooling effect korean medicine treatment was expected to be effective for febrile alopecia, and actually had significant effects on this study. For future studies, it's long term treatment and follow up studies are needed.

• Horticultural Science & Technology
• /
• v.29 no.1
• /
• pp.10-15
• /
• 2011

The influence of root zone temperature to the induction of inflorescence and growth of Phalaenopsis was investigated. Root zone temperatures were 15, 20, 25, and $30^{\circ}C$, while the air temperature was kept over $28^{\circ}C$ during three months. $CO_2$ uptake, fresh weight, dry weight and branched root number of Phalaenopsis were highest at $25^{\circ}C$ and lowest at $15^{\circ}C$. But, the anthocyanin content was highest at $15^{\circ}C$ and lowest at $25^{\circ}C$. Inflorescence was not induced by root zone cooling temperature below $25^{\circ}C$ for three months. The concentrations of K, Ca and Mg in leaves were changed according to the root zone temperature, but those of N and P were not changed. K content was high at $20^{\circ}C$, whereas Ca and Mg contents were high at $25^{\circ}C$ root zone temperature. This study indicates that Phalaenopsis perceives temperature by shoot and the optimum root-zone temperature for the vegetative growth is $25^{\circ}C$.

• Resources Recycling
• /
• v.26 no.5
• /
• pp.54-60
• /
• 2017

In this study, we investigated the effect of $TiCl_4$ injection time on the Kroll reaction at a given weight ratio of $TiCl_4$ and Mg. The reduction reaction was investigated by measuring the temperature change according to $TiCl_4$ injection time and observing the cross section and appearance of the Ti sponge after the reaction. The temperature increment due to Kroll reaction heat generation was found to be linearly proportional to the $TiCl_4$ feed rate. In the graph of $TiCl_4$ injection time and reduction tank temperature, initial temperature peaks were observed irrespective of the injection conditions. This is interpreted to mean a temporary interruption of reaction due to $MgCl_2$ formation after the initial Kroll reaction. In addition, when the cross section of the sponge was observed, a large amount of spherical Mg particles was observed in $MgCl_2$. We can infer that this is the process of continuously feeding the unreacted Mg surface, so that a continuous Kroll reaction takes place. The sponge appearance showed that the coalescence or growth of the Kroll reacted Ti particles can be controlled by the cooling rate.

• Food Science and Preservation
• /
• v.17 no.5
• /
• pp.581-585
• /
• 2010

The effects of plastic container vent ratio on fruit quality during strawberry precooling and storage were analyzed. Plastic containers ($520mm{\times}355mm{\times}182mm$) were manufactured with bottom and side vents at areal ratios of 5%, 10%, 15% and 20%. Fruit was loaded at a volume ratio of 80% prior to pressure cooling and storage at $5^{\circ}C$. The internal fruit temperature was $18^{\circ}C$ and the times taken to attain $2^{\circ}C$ after precooling were 1 hour 9 minutes, 1 hour 13 minutes, 2 hours 2 minutes, and 2 hours 51 minutes at vent ratios of 20%, 15%, 10%, and 5%, respectively. To mimic the current distribution system, precooled strawberries were packaged in tray wrapping and stored at $5^{\circ}C$. Changes in weight, bruising, extent of decay, and firmness, were measured. Weight loss, bruising, and decay were highest at a vent ratio of 20%, lowest at a vent ratio of 15%, and moderate at vent ratios of 5% and 10%. No significant among-treatment difference in fruit firmness was evident.