• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1497_1498
• /
• 2009

This paper presents the simulation of micro-lens arrays based on dry and wet etching technique. Code V (Optical Research Associates Ltd) simulation was performed to extract optimal design parameters of a Micro-Lens Array(MLA). Thickness of UV adhesive, wavelength of laser source, curvature, and shape of lens surface were chosen for the design parameters. The simulation results showed that focal length of a MLA decreased with the increase of UV adhesive thickness. And the focal length depended on shape of lens surface and length of laser source.

• Journal of Astronomy and Space Sciences
• /
• 제12권2호
• /
• pp.196-203
• /
• 1995

소백산천문대의 61cm 망원경을 사용하여 식쌍성 SW Lyn에 대한 UBV관측을 1983년 9월 부터 1987년 3월까지 7일밤 동안 수행하여 광도곡선을 얻었다. 이 광도곡선은 부극심을 중심으로 좌우가 비대칭이며 그 정도는 파장이 짧을수록 심한 것으로 나타났다. 비대칭 광도변화를 만드는 윈인을 흑점이라고 가정하고, 우리의 광도곡선 중에서 B와 V광도곡선을 WD 방법으로 분석하여 해를 얻었다. 그 결과 SW Lyn이 접촉에 가까운 준접촉계임이 밝혀졌으며 Case A 진화를 하는것으로 보인다.

• Computers and Concrete
• /
• 제6권6호
• /
• pp.505-521
• /
• 2009

The analysis of prismatic members made of reinforced concrete under inclined bending, especially the computation of ultimate loads, is a pronounced non-linear problem which is frequently solved by discretizing the stress distribution in the cross-section using interpolation functions. In the approach described in the present contribution the exact analytical stress distribution is used instead. The obtained expressions are integrated by means of a symbolic manipulation package and automatically converted to optimized Fortran code. The direct problem-computation of ultimate internal forces given the position of the neutral axis-is first described. Subsequently, two kinds of inverse problem are treated: the computation of rupture envelops and the dimensioning of reinforcement, given design internal forces. An iterative Newton-Raphson procedure is used. Examples are presented.

• Journal of Astronomy and Space Sciences
• /
• 제15권1호
• /
• pp.75-82
• /
• 1998

A total of 842 observations (277 in B, 282 in V, and in R) for U Pegasi were made in October of 1996 at Mt. Sobaek Observatory. With our data we constructed the BVR light curves and determinded 5 times of minimum light. We also obtained physical parameters of the system by combined analysis of both light and radial velocity curves using the Wilson-Devinney code.

• Steel and Composite Structures
• /
• 제35권6호
• /
• pp.753-763
• /
• 2020

In this article, the influence of fuzzified uncertain composite elastic properties on non-linear deformation behaviour of the composite structure is investigated under external mechanical loadings (uniform and sinusoidal distributed loading) including the different end boundaries. In this regard, the composite model has been derived considering the fuzzified elastic properties (through a triangular fuzzy function, α cut) and the large geometrical distortion (Green-Lagrange strain) in the framework of the higher-order mid-plane kinematics. The results are obtained using the fuzzified nonlinear finite element model via in-house developed computer code (MATLAB). Initially, the model accuracy has been established and explored later to show the dominating elastic parameter affect the deflection due to the inclusion of fuzzified properties by solving a set of new numerical examples.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2012년도 제45회 KOSCO SYMPOSIUM 초록집
• /
• pp.325-328
• /
• 2012

Radiation effects on the partially premixed methane flames diluted with water vapor in the air stream were numerically investigated. OPPDIF code and GRI-v3.0 were used in the numerical simulation. Adiabatic condition was compared with two different radiation models, optically-thin and WSGGM models. It was found that the radiation effect on the flame structure for the equivalence ratio (${\Phi}$) of 2.5 was less than ${\Phi}=1.5$. Extinction limit was not affected significantly, however, local flame structure was markedly influenced by the radiation models as increasing the water vapor concentration.

• 반도체디스플레이기술학회지
• /
• 제5권2호
• /
• pp.11-14
• /
• 2006

A new reset waveform with negative ramp pulse is proposed. Conventional reset waveform applied to the commercial PDP uses a positive ramp pulse. The reset waveforms, especially focused on ramp area, were examined with 2 dimensional fluid code. The proposed negative reset waveform showed much lower ignition voltage ($\sim$70V) as compared with the conventional reset waveform. When the negative ramp pulse was applied, all of the positive-charged ions are collected on the scan electrode. It is found that the ignition voltage of reset discharge due to the negative ramp pulse became lower than that of positive ramp discharge.

• 한국분무공학회지
• /
• 제17권2호
• /
• pp.77-85
• /
• 2012

The CFD simulation of diesel spray tip penetrations were compared with 0-D simulation for experimental data obtained with common rail injection system. The simulated four injection patterns include single, pilot and split injections. The CFD simulation of the spray penetration over these injection patterns was performed using the KIVA-3V code, which was implemented with both the standard KIVA spray and original gas jet sub-models. 0-D simulation of the spray tip penetration with time-varying injection profiles was formulated based on the effective injection velocity concept as an extension of steady gas jet theory. Both the CFD simulation of the spray tip penetration with the standard KIVA spray model and 0-D simulation matched better with the experimental data than the results of the gas jet model for the entire fuel injection patterns.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.1603-1606
• /
• 2005

Eye Glass Display (EGD) with microdisplay to realize the virtual display can make the large screen, so virtual image has been developed by using microdisplay panel. This paper shows study of low cost lens design and simulation for microdisplay system with 0.6" Liquid Crystal on Silicon (LCoS) panel. Lens design optimized consider to spherical aberration, astigmatism, distortion, and chromatic aberration. Code V is used and it designed an aspheric lens about exit pupil 6mm, eye relief 20mm and 35 degree of field of view (FOV). With the application this aspheric lens to LCOS type's microdisplay, virtual image showed 50 inch at 2m. One side of the aspheric lens was constituted from diffractive optical element (DOE) for the improvement in a performance. It had less than ${\pm}2%$ of distortion value and modulation transfer function in axial had 20% of resolution with 30 lp/mm spatial frequency. The optical system is suitable for display of 0.6"-diagonal with SVGA.

• 대한전자공학회논문지
• /
• 제25권1호
• /
• pp.33-41
• /
• 1988

In this work, two-dimensional finite element method code is developed to characterize GaAs MESFET devices. Here, two coupled equations, i.e., Poisson equation and current continuity equation, are solved iteratively by Gummel's scheme. The energy transport equation is incorporated with these to include the temperature information. By this method, the GaAs MESFET device is analyzed by calculating the potential and electron concentration distribution. from these the I-V characteristics and other device parametersare obtained and discussed. It is comfirmed that this method can be effectively used in the device level simulation and characterization and can be extended to the small and large signal analysis of the device.