• Progress in Medical Physics
• /
• v.14 no.1
• /
• pp.1-7
• /
• 2003

In this work we developed a EGS4 control code to calculate the dose distributions for high energy electron beams in water phantom applied longitudinal magnetic field. We reviewed the electron's motion in magnetic field and delivered equations for direction changs of the electron by the external magnetic field. The mathematical results are inserted into the EGS4 code system to account for the presence of external magnetic fields in phantom. The electron pencil beam paths of 6 MeV in water phantom are calculated for magnetic fields of 1-3 T and the dose distributions for a field of 1.0 cm in diameter are calculated for magnetic fields of 0.6-1 T using the code. From the results of path calculations we found that the lateral ranges of the electrons are reduced in the magnetic field of 3 T. For a field of 1 cm diameter and a magnetic field of 1 T, the small dose enhancement near the range of the electrons on the depth dose and the penumbra reduction of 0.15 cm on the beam profile are observed. We discussed and evaluated the results from the theoretical concepts.

• Journal of Preventive Medicine and Public Health
• /
• v.56 no.4
• /
• pp.312-318
• /
• 2023

Objectives: We reviewed the operational definitions of colorectal cancer (CRC) from studies using the Korean National Health Insurance Service (NHIS) and compared CRC incidence derived from the commonly used operational definitions in the literature with the statistics reported by the Korea Central Cancer Registry (KCCR). Methods: We searched the MEDLINE and KoreaMed databases to identify studies containing operational definitions of CRC, published until January 15, 2021. All pertinent data concerning the study period, the utilized database, and the outcome variable were extracted. Within the NHIS-National Sample Cohort, age-standardized incidence rates (ASRs) of CRC were calculated for each operational definition found in the literature between 2005 and 2019. These rates were then compared with ASRs from the KCCR. Results: From the 62 eligible studies, 9 operational definitions for CRC were identified. The most commonly used operational definition was "C18-C20" (n=20), followed by "C18-C20 with claim code for treatment" (n=3) and "C18-C20 with V193 (code for registered cancer patients' payment deduction)" (n=3). The ASRs reported using these operational definitions were lower than the ASRs from KCCR, except for "C18-C20 used as the main diagnosis." The smallest difference in ASRs was observed for "C18-C20," followed by "C18-C20 with V193," and "C18-C20 with claim code for hospitalization or code for treatment." Conclusions: In defining CRC patients utilizing the NHIS database, the ASR derived through the operational definition of "C18-C20 as the main diagnosis" was comparable to the ASR from the KCCR. Depending on the study hypothesis, operational definitions using treatment codes may be utilized.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2001.05a
• /
• pp.81-84
• /
• 2001

Some trials to simulate the spinning process by which V-belt pulley is usually being manufactured are done in this study. 2D finite element analysis (FEA) for the whole process to produce a mono-typed pulley including preforming, 1st spinning, axial compression and 2nd spinning processes is carried out using the commercial code $DEFORM2D^{TM}$. The sectional shape after each process is compared with that of real product. The deformed shape obtained from the FEA, on the whole, coincides with the experimental result well, but the thickness around the bottom of the V-groove is somewhat different each other.

• Journal of Astronomy and Space Sciences
• /
• v.27 no.2
• /
• pp.81-88
• /
• 2010

A total of 583 observations (193 in ${\Delta}b$, 190 in ${\Delta}v$, 200 in ${\Delta}r$) for V523 Cas was made on 9 nights from September to December in 2008 using the 100 cm telescope with 2K CCD camera of the Chungbuk National University Observatory. With our data BVR light curves were constructed and 9 times of minimum light were determined. We also obtained physical parameters of the V523 Cas system by analysis of the BVR light curves using the Wilson-Devinney code.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.327-332
• /
• 2008

For the cracked component under combined primary and secondary stress, an interacion between the loads occurs and the secondary stress is relaxed by the primary load. To account for this phenomena, R6 code provides the correction factor which is called V-factor. However, evaluation corrected with V-factor need to be examined for its conservatism. In this paper the conservatism of the current V-factor is examined for the circumferentially cracked pipe under the combined load and new evaluation method is proposed to reduce the conservatism.

• ETRI Journal
• /
• v.37 no.5
• /
• pp.972-978
• /
• 2015

This paper proposes an accurate tunable-gain 1/x circuit. The output voltage of the 1/x circuit is generated by using a capacitor charging time that is inversely proportional to the input voltage. The output voltage is independent of the process parameters, because the output voltage depends on the ratios of the capacitors, resistors, and current mirrors. The voltage gain of the 1/x circuit is tuned by a 10-bit digital code. The 1/x circuit was fabricated using a $0.18{\mu}m$ CMOS process. Its core area is $0.011mm^2$ ($144{\mu}m{\times}78{\mu}m$), and it consumes $278{\mu}W$ at $V_{DD}=1.8V$ and $f_{CLK}=1MHz$. Its error is within 1.7% at $V_{IN}=0.05V$ to 1 V.

• 한국연소학회:학술대회논문집
• /
• 2012.11a
• /
• pp.309-310
• /
• 2012

Modeling of biodiesel combustion on compression ignition engine was conducted by using the KIVA3v-Release 2 code coupled with Chemkin chemistry solver2. In order to calculate the chemical kinetics of combustion of biodiesel, a reduced mechanism of methyl decanoate and methyl 9-decanoate was used. It is composed of 123 species and 394 reactions. Also, the experiments were performed on a single-cylinder engine. The simulation results agreed well with experiments results. And soot concentrations of biodiesel were lower than those of diesel.

• Communications of the Korean Mathematical Society
• /
• v.28 no.1
• /
• pp.123-134
• /
• 2013

Operational techniques have drawn the attention of several researchers in the study of sequence of functions and polynomials. An attempt is made to introduce a new sequence of functions by using operational techniques. Some generating relations and finite summation formulae have been obtained. The corresponding MAPLE code for obtaining above sequence of functions for different values of parameters was also discussed.

• 한국연소학회:학술대회논문집
• /
• 2012.04a
• /
• pp.105-106
• /
• 2012

This study is numerical analysis about optimal conditions of GDICI (gasoline direct injection compression ignition) engine operation using intake preheating. Numerical modeling was performed by using the KIVA-3V Release2 code integrated Chemkin chemistry solver II. For validation of numerical model, experiments were performed on a single-cylinder engine. Throughout the numerical simulations under variable conditions, the ranges of optimal conditions were found.

• Korean Journal of Materials Research
• /
• v.6 no.7
• /
• pp.733-741
• /
• 1996

In this study MeV Si self ion implantations were done to reveal the intrinsic behavior of defect formation by excluding the possibility of chemical interactions between substrate atoms and dopant ones. Self implantations were conducted using Tandem Accelerator with energy ranges from 1 to 3 MeV. Defect formation by high energy ion implantation has a significant characteristics in that the lattice damage is concentrated near Rp and isolated from the surface. In order to investigate the energy dependence on defect formation, implantation energies were varied from 1 to 3 MeV under a constant dose of $1{\times}10^{15}/cm^2$. RBS channe!ed spectra showed that the depth at which as-implanted damaged layer formed increases as energy increases and that near surface region maintains better crystallinity as energy increases. Cross sectional TEM results agree well with RBS ones. In a TEM image as-implanted damaged layer appears as a dark band, where secondary defects are formed upon annealing. In the case of 2 MeV $Si^+$ self implantation a critical dose for the secondary defect formation was found to be between $3{\times}10^{14}/cm^24$ and $5{\times}10^{14}/cm^2$. Upon annealing the upper layer of the dark band was removed while the bottom part of the dark band did not move. The observed defect behavior by TEM was interpreted by Monte Carlo computer simulations using TRIM-code. SIMS analyses indicated that the secondary defect formed after annealing gettered oxygen impurities existed in silicon.