• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 1998년도 춘계 학술대회논문집
• /
• pp.123-127
• /
• 1998

A computer code has been developed for an analysis of conduction and convection heat transfer on a personal computer. FVM based on unstructured mesh has been employed for triangular and quadrilateral element. All variable of p, u, v, T, k and ${\varepsilon}$ has been defined on a node (not on a center of element). The code possesses the pre-and post-processor for itself to provide user-friendly interface.

• 한국방사선학회논문지
• /
• 제3권3호
• /
• pp.23-25
• /
• 2009

Gd-157 material has very large neutron capture cross section in the thermal region. So it is very useful to shield material for thermal neutrons. Futhermore, in the neutron capture experiment and calculation, the neutron absorption and scattering are very important. Especially these effects are conspicuous in the resonance energy region and below the thermal energy region. In the case of very narrow resonance, the effect of scattering is to be more considerable factor. In the present study, we obtained energy dependent neutron absorption ratios of natural indium in energy region from 0.003 to 100 keV by MCNP-4B Code. The coefficients for neutron absorption was calculated for circular type and 1 mm thickness. In the lower energy region, neutron absorption is larger than higher region, because of large capture cross section (1/v). Furthermore it seems very different neutron absorption in the large resonance energy region. These results are very useful to decide the thickness of sample and shielding materials.

• 한국분무공학회지
• /
• 제24권4호
• /
• pp.171-177
• /
• 2019

This paper describes numerical study of combustion characteristics in CNG(compressed natural gas) DI(direct injection) engine using gaseous sphere injection model. Simulations were conducted using KIVA-3V Release 2 code. Gaseous sphere injection model, which is modified model of liquid fuel injection, was used to simulate the CNG direct injection. Until now, a very fine mesh smaller than the injector nozzle has been required to resolve the gas-jet inflow boundary. However, the gaseous sphere injection model simulates gaseous fuel injection using a coarse mesh. This model injects gaseous spheres as in liquid fuel injection and the gaseous spheres evaporate together without the latent heat of evaporation. Therefore, it does not require a very fine mesh and reduce calculation time. Combustion simulation were performed under various injection timings and injection pressures.

• 한국분무공학회지
• /
• 제22권1호
• /
• pp.29-35
• /
• 2017

This paper describes the effects of spray breakup model constants on spray and combustion characteristics in single cylinder compression engine. KIVA-3V code coupled with a CHEMKIN chemistry solver was used for numerical analysis. In this study, spray simulations and combustion simulations are studied simultaneously. Spray simulation was conducted in constant volume to reduce the effects of air-flow as swirl or tumble. The model validation was conducted and there are little difference between experiments and simulation, this differences were reasonable. In spray simulation, the effects of model constants on spray tip penetration, spray patter and SMD were studied. Furthermore, the analysis of effects of breakup variables on combustion and emissions characteristics was conducted. The results show the KH-RT breakup model constants affects spray and combustion characteristics strongly. Increasing KH model variable (B1) and RT model constants ($C_{\tau}$, $C_{RT}$) induced slower breakup time.

• Nuclear Engineering and Technology
• /
• 제51권3호
• /
• pp.647-653
• /
• 2019

A comprehensive study of photon interaction features has been made for some alloys containing Pd and Ag content to evaluate its possible use as alternative gamma radiations shielding material. The mass attenuation coefficient (${\mu}/{\rho}$) of the present alloys was measured at various photon energies between 81 keV - 1333 keV utilizing HPGe detector. The measured ${\mu}/{\rho}$ values were compared to those of theoretical and computational (MCNPX code) results. The results exhibited that the ${\mu}/{\rho}$ values of the studied alloys are in same line with results of WinXCOM software and MCNPX code results at all energies. Moreover, Pd75/Ag25 alloy sample has the maximum radiation protection efficiency (about 53% at 81 keV) and lowest half value layer, which shows that Pd75/Ag25 has superior gamma radiation shielding performance among the compared other alloys.

• Nuclear Engineering and Technology
• /
• 제51권3호
• /
• pp.853-859
• /
• 2019

A comprehensive study of photon interaction features has been made for some alloys containing Pd and Ag content to evaluate its possible use as alternative gamma radiations shielding material. The mass attenuation coefficient (${\mu}/{\rho}$) of the present alloys was measured at various photon energies between 81 keV-1333 keV utilizing HPGe detector. The measured ${\mu}/{\rho}$ values were compared to those of theoretical and computational (MCNPX code) results. The results exhibited that the ${\mu}/{\rho}$ values of the studied alloys are in the same line with results of WinXCOM software and MCNPX code results at all energies. Moreover, Pd75/Ag25 alloy sample has the maximum radiation protection efficiency (about 53% at 81 keV) and lowest half value layer, which shows that Pd75/Ag25 has superior gamma radiation shielding performance among the other compared alloys.

• Nuclear Engineering and Technology
• /
• 제49권8호
• /
• pp.1610-1616
• /
• 2017

To validate the new Evaluated Nuclear Data File $(ENDF)/B-VIII.0{\beta}4$ library, 31 different critical cores were selected and used for a benchmark test of the important parameter keff. The four utilized libraries are processed using Nuclear Data Processing Code (NJOY2016). The results obtained with the $ENDF/B-VIII.0{\beta}4$ library were compared against those calculated with ENDF/B-VI.8, ENDF/B-VII.0, and ENDF/B-VII.1 libraries using the Monte Carlo N-Particle (MCNP(X)) code. All the MCNP(X) calculations of keff values with these four libraries were compared with the experimentally measured results, which are available in the International Critically Safety Benchmark Evaluation Project. The obtained results are discussed and analyzed in this paper.

• 한국통신학회논문지
• /
• 제31권7C호
• /
• pp.659-664
• /
• 2006

본 논문에서는 고밀도 광 기록 저장 시스템을 위하여 두 가지 새로운 에러 정정 알고리즘을 제안하였다. 첫 번째 알고리즘(New Code IV)는 랜덤 에러에 대한 민감성을 감소시켜서 잘못된 이레이져 선언을 줄이고 코드율을 증가시켰다. 두 번째 알고리즘(New Code V)는 이레이져 선언을 위한 정보 데이터와 독립적인 Indicator flag(IF)를 사용하였다. 실험 결과 제안한 두 포맷은 기존 코드와 비교해 비슷한 코드율로 다양한 에러 분포 환경에서 보다 우수한 에러 정정 능력을 가진다.

• 센서학회지
• /
• 제25권5호
• /
• pp.303-309
• /
• 2016

In this paper, we introduce a new method for controlling the illumination of LEDs in visible light communication (VLC) by changing the duty cycle of Manchester code. When VLC data were transmitted in Manchester code, the average optical power of the LEDs was proportional to the duty cycle. In experiments, we controlled the illumination of a $3{\times}3$ LED array from 10% to 90% of its peak value by changing the duty cycle of the Manchester code. The synchronizing clocks required for encoding and decoding the Manchester code were supplied by pulse generators that were connected to a 220 V power line. All pulse generators made the same pulses with a repetition frequency of 120 Hz, and they were synchronized with the full-wave rectified voltage of the power line. This scheme is a very simple and useful method for constructing indoor wireless sensor networks using LED light.

• 한국지반공학회논문집
• /
• 제28권3호
• /
• pp.35-43
• /
• 2012

동반논문(I. 국외 내진설계기준 및 부지응답특성과의 비교)에 이어서 2-매개변수 지반분류 방법의 지반 증폭계수가 국내 지반조건 및 지반증폭특성에 적합함을 검증하기 위하여, 2003년 이후 국내에서 발생 또는 영향을 미친 주요 지진에 대한 계측 기록을 분석하였다. 거리가 30km 이내인 암반 계측 관측소와 토사지반 계측 관측소의 계측 자료들을 추출하여 시간영역 가속도 신호로부터 암반 및 토사지반에서의 응답스펙트럼을 각각 결정하였고, 이로부터 단주기 및 장주기 증폭계수를 결정하였다. 일부 오류가 발생한 데이터들도 존재하였지만, 대부분 국내 지반 특성에 적합하도록 단주기 영역에서의 증폭이 장주기 영역보다 크게 나타났다. 또한 2-매개변수 지반분류 방법에서 제안하는 지반 증폭계수는 실지진 계측 기록으로부터 획득한 결과와 매우 유사한 경향을 보임으로써 타당성을 확인하였다. 또한, 한국전력연구원에서 운영중인 4개의 765kV 변전소 지진 계측 기록을 추가적으로 분석하였다. 암반 계측과 토사지반 계측 사이의 거리가 수백 m로 가깝게 설치되었으므로 오류 없이 일관된 결과를 도출하였고, 2-매개변수 지반분류 방법의 지반 증폭계수는 경향성 및 절대값에서 실지진 계측 자료 분석 결과와 유사성을 보이면서 국내 지반 조건에 대한 적합성을 검증하였다.