• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.4
• /
• pp.803-812
• /
• 2018

The Morse code was firstly used for a wire telegraph service on May 1884 in USA. After about 10 years Korean researchers developed the Morse code in 1884 and the Morse code was firstly introduced in Korea for the wire telegraph service in September 1885. For about 130 years later, the Hangul Jamo Morse code has been used without any serious modification up to now. The Morse code is the variable length code system which each codes have a different code length. The related reference shows that English alphabet Morse code was applied in the coding theory. However, a result of analysis showed that the Hangul Jamo Morse code was not applied in the coding theory as the english alphabet code system. This paper presents the analysis result of Hangul Jamo Morse code according to the variable length coding theory. As a result of the analysis, when Hangul Jamo are coded with application of the variable length coding theory, the transmission data rate could be increased up to 25% compare to the existing code system. This paper shows a new Hangul Jamo Morse code system based on the analysis result.

• Journal of the Korea Convergence Society
• /
• v.4 no.3
• /
• pp.27-33
• /
• 2013

Conventional bar code has the appearance of line bars and spaces, called as one-dimensional bar code. In contrast, the information in two-dimensional bar code is represented by either a small, rectangular or square with the types of mosaic and Braille. The two-dimensional bar code is much more efficient than one-dimensional bar code because it can allow to store and express large amounts of data in a small space and so far there is also a little information about decoding the Data Matrix in base 256 mode. According to the ISO international standards, there are four kinds of bar code: QR code, Data Matrix, PDF417, and Maxi code. In this paper, among them, we focus on describing the basic concepts of Data Matrix in base 256 mode, how to encode and decode them, and how to organize them in detail. In addition, Data Matrix can be organized efficiently depending on the modes of numeric, alphanumeric characters, and binary system and expecially, we focus on describing how to decode the Data Matrix code by four modes.

• The KIPS Transactions:PartA
• /
• v.12A no.1 s.91
• /
• pp.79-86
• /
• 2005

This paper suggests that sparse code motion algorithm should be used to make the code optimal in the respect of computation and lifetime. This algorithm Is SpCM algorithm, which expand BCM and LCM algorithm. BCM algorithm carries out the optimal code motion computationally and LCM algorithm reduces the register pressure in SpCM algorithm. Generally, code motion algorithm accomplishes the run-time optimal connected with the optimum of computation and the register pressure. Computational cost and consideration of the code size in the register pressure are also added in the paper. The optimum of code motion could be obtained through SpCM algorithm, which considers the code size, in audition to computational optimal and lifetime optimal. The algorithm presented in this paper is the most optimal algorithm in the respect of computation and lifetime, as all the unnecessary code motions are restrained.

• Journal of Korea Port Economic Association
• /
• v.29 no.4
• /
• pp.247-264
• /
• 2013

QR Code can save much more information than 1D Bar Code and encode various types of information. As it takes less general cost than high priced RFID, it can be recognized through smart-phone without any special facilities. Despite these strengths, QR Code is just used by general people for their daily life service, while 1D Bar Code is applied in all kinds of industry like sales, distribution, production management, quality management and so on. And RFID is also used in many industrial field like harbor and distribution area. The range of QR Code's usage is getting broad but still restrictive. So it is required to make new organized system. Therefore, this research suggests that Applying QR Code in the SCM. Connecting QR Code with SCM, it secures space for data's movement. And it helps not only rise the speed and accuracy of data flow but also reduce logistical cost.

• Journal of KIISE:Information Networking
• /
• v.35 no.1
• /
• pp.1-10
• /
• 2008

Once the sensor node in wireless sensor networks is installed, it usually operates without human intervention for a long time. The remote code update scheme is required because it is difficult to recall the sensor node in many situations. Therefore, studies on the reliable and efficient transport protocol for code propagation in wireless sensor networks have been increasingly done. However, by considering only the stability aspect of transmission, most of previous works ignore the consideration on the fast code propagation. This results the energy inefficiency by consuming unnecessary energy due to the slow code propagation. In this paper, in order to overcome limitation of the previous code propagation protocols, we propose a new code propagation protocol called "FCPP(Fast Code Propagation Protocol)". The FCPP aims at improving the reliability at well as performance. For this purpose, the FCPP accomplishes the fast code propagation by using the RTT-based transmission rate control and NACK suppression scheme, which provides a better the network utilization and avoids a unnecessary transmission delay. Based on the ns-2 simulation result, we prove that the FCPP Improves significantly both reliability and performance.

• Journal of the Korean Society of Safety
• /
• v.35 no.4
• /
• pp.84-91
• /
• 2020

The Korean nuclear industry developed the SPACE (Safety and Performance Analysis Code for nuclear power plants) code and this code adpots two-phase flows, two-fluid, three-field models which are comprised of gas, continuous liquid and droplet fields and has a capability to simulate three-dimensional model. According to the revised law by the Nuclear Safety and Security Commission (NSSC) in Korea, the multiple failure accidents that must be considered for accident management plan of nuclear power plant was determined based on the lessons learned from the Fukushima accident. Generally, to improve the reliability of the calculation results of a safety analysis code, verification work for separate and integral effect experiments is required. In this reason, the goal of this work is to verify calculation capability of SPACE code for multiple failure accident. For this purpose, it was selected the experiment which was conducted to simulate a Multiple Steam Generator Tube Rupture(MSGTR) accident with Passive Auxiliary Feedwater System(PAFS) operation by Korea Atomic Energy Research Institute (KAERI) and focused that the comparison between the experiment results and code calculation results to verify the performance of the SPACE code. The MSGR accident has a unique feature of the penetration of the barrier between the Reactor Coolant System (RCS) and the secondary system resulting from multiple failure of steam generator U-tubes. The PAFS is one of the advanced safety features with passive cooling system to replace a conventional active auxiliary feedwater system. This system is passively capable of condensing steam generated in steam generator and feeding the condensed water to the steam generator by gravity. As the results of overall system transient response using SPACE code showed similar trends with the experimental results such as the system pressure, mass flow rate, and collapsed water level in component. In conclusion, it could be concluded that the SPACE code has sufficient capability to simulate a MSGTR accident.

• The Journal of the Korea Contents Association
• /
• v.18 no.10
• /
• pp.431-442
• /
• 2018

2-dimensional barcode, QR code has been used for containing various information such as image, video, map, and business cards. Currently, a smartphone is used as a QR code scanner, displaying the code and converting it to a standard URL for a website. However, QR codes are not very common in encrypted application and so have a few applications. This paper proposes a new color-code, which integrates the conventional QR code and color design, and can be effectively used in some product certification system. The proposed method exploits the fact that genuine code is produced by CMYK color model, but the counterfeit is captured by RGB color model and during this process, color information of the code is changed. This paper introduces the color matrix model to measure the distortion between genuine code and counterfeit code. By investigating the statistical characteristics of color matrix, an effective detection of print image forgeries are designed. Various experiments with color codes show that the proposed system can be effectively used in product certification systems.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.12C
• /
• pp.1135-1142
• /
• 2006

This article presents a new asynchronous MC-CDMA system to implement multiple data rate communications. In a W-CDMA downlink, the OVSF code is used for spreading code for various multimedia traffic. Proposed system utilizes the OVSF code that generated by generation property for spreading. The proposed MC-CDMA system use different lengths of OVSF code as a spreading code according to their data rate. The groupwise processing is accomplished by code grouping in OVSF code generation tree. Between each group, the code grouping interference canceller is performed to cancel other group interference. At that time the proposed receiver does not require any information about interference users. For the analysis of average BER performance, we propose system model and computer simulation were used. We also compare the system performance with that of a single rate MC-CDMA system used orthogonal code as a spreading code.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.1A
• /
• pp.34-42
• /
• 2012

Low density parity check (LDPC) code is widely used, since it shows superior performance close to Shannon limit and its decoding complexity is lower than turbo code. Recently, it is used as a channel code to decode Wyner-Ziv frames in distributed video coding (DVC) system. In this paper, we propose an efficient method to design the parity check matrix H of LDPC codes. In order to apply LDPC code to DVC system, the LDPC code should have rate compatibility. Thus, we also propose a method to merge check nodes of LDPC code to attain the rate compatibility. LDPC code is designed using ACE algorithm and check nodes are merged for a given code rate to maximize the error correction capability. The performance of the designed LDPC code is analyzed extensively by computer simulations.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.8C
• /
• pp.731-741
• /
• 2009

Optical repeater is often installed at the isolated area. Spatial separation makes it possible to reduce the inter-code interference when secondary scrambling codes are used for traffic connected through repeater. In this paper, we propose five secondary scrambling code usage scenarios with the aids of optical repeater to maximize the user capacity. In order to evaluate the performance, dynamic system level simulation is performed. We also propose a base station-repeater switching where each active users can change access points by comparing the channel condition from base station and repeater thorough secondary common pilot channel (S-CPICH) signal to noise-interference ratio (SINR). Moreover, primary-secondary scramble code replacing scheme is proposed which replaces secondary scramble code with primary scramble code when a call using primary scramble code is ended and its corresponding OVSF code is available to users using the secondary scramble code