• Polymer(Korea)
• /
• v.29 no.4
• /
• pp.321-330
• /
• 2005

In 1990's the Korean polyolefin industry boomed up through the development of magnificient polymerization catalysts. To understand the general situation of polymerization catalyst R & D, the various experimental results had been summarized for the investigation of not only the supported Ziegler-Natta catalyst used presently in polyolefin industry but also the metallocene catalysts applied for the preparation of special grade of polyolefin. In addition, it had been shown that the new polymeric materials were prepared by new developed catalyst, and the polymer in-situ nanocomposites could be obtained with the application of catalyst heterogenization procedures.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.11a
• /
• pp.39-42
• /
• 2002

Recently, CMP (chemical mechanical polishing) technology has been widely used for global planarization of multi-level interconnection for ULSI applications. However, COO (cost of ownership) and COC (cost of consumables) were relatively increased because of expensive slurry. In this paper, we have studied the possibility of recycle of reused silica slurry in order to reduce the costs of CMP slurry. The post-CMP thickness and within-wafer non-uniformity(WIWNU) were measured as a function of different slurry composition. As a experimental result, the performance of reused slurry with annealed silica abrasive of 2 wt% contents was showed high removal rate and low non-uniformity. Therefore, we propose two-step CMP process as follows In the first-step CMP, we can polish the thick and rough film surface using remaked slurry, and then, in the second-step CMP, we can polish the thin film and fine pattern using original slurry. In summary, we can expect the saving of high costs of slurry.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.9
• /
• pp.759-764
• /
• 2003

Recently, CMP (chemical mechanical polishing) technology has been widely used for global planarization of multi-level interconnection for ULSI applications. However, COO (cost of ownership) and COC (cost of consumables) were relatively increased because of expensive slurry. In this paper, we have studied the possibility of recycle of roused silica slurry in order to reduce the costs of CMP slurry. The post-CMP thickness and within-wafer non-uniformity (WIWNU) wore measured as a function of different slurry composition. As an experimental result, the performance of reused slurry with annealed silica abrasive of 2 wt％ contents was showed high removal rate and low non-uniformity. Therefore, we propose two-step CMP process as follows , In tile first-step CMP, we can polish the thick and rough film surface using remaked slurry, and then, in the second-step CMP, we can polish the thin film and fine pattern using original slurry. In summary, we can expect the saying of high costs of slurry.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05c
• /
• pp.41-44
• /
• 2003

As the device feature size is reduced to the deep sub-micron regime, the chemical mechanical polishing (CMP) technology is widely recognized as the most promising method to achieve the global planarization of the multilevel interconnection for ULSI applications. However, cost of ownership (COO) and cost of consumables (COC) were relatively increased because of expensive slurry. In this paper, the effects of different slurry composition on the oxide CMP characteristics were investigated to obtain the higher removal rate and lower non-uniformity. We prepared the various kinds of slurry. In order to save the costs of slurry, the original slurry was diluted by de-ionized water (DIW). And then, alunima abrasives were added in the diluted slurry in order to promote the mechanical force of diluted slurry.

• Journal of Power Electronics
• /
• v.17 no.6
• /
• pp.1469-1479
• /
• 2017

Primary-side regulation (PSR) scheme is widely applied in low power applications, such as cell phone chargers, network adapters, and LED drivers. However, the efficiency and standby power requirements have been improved to a high standard due to the new trends of DOE (Department Of Energy) Level VI and COC (Code Of Conduct specifications) V5. The major drawbacks of PSR include poor regulation due to inaccurate feedback and difficulty in acquiring acceptable regulation. A novel adaptive blanking strategy for constant current and constant voltage regulation is proposed in this paper. An accurate model for the sample blanking time related to transformer leakage inductance and the metal-oxide-semiconductor field-effect transistor (MOSFET) parasitic capacitance is established. The proposed strategy can achieve accurate detection for ultra-low standby power. In addition, numerous control factors are analyzed in detail to eliminate the influence of leakage inductance on the loop stability. A dedicated controller integrated circuit (IC) with a power MOSFET is fabricated to verify the effectiveness of the proposed control strategy. Experimental results demonstrated that the prototype based on the proposed IC has excellent performance.

• Imaging Science in Dentistry
• /
• v.51 no.2
• /
• pp.203-208
• /
• 2021

Ghost cell odontogenic carcinoma (GCOC) is a rare malignant neoplasm characterized by the presence of ghost cells. It is considered to originate from either a calcifying odontogenic cyst(COC) or a dentinogenic ghost cell tumor(DGCT). Its clinical and radiographic characteristics are non-specific, including slow growth, locally aggressive behavior, and eventual metastasis. This case report describes a 43-year-old Thai man with plain radiographs and cone-beam computed tomographic images revealing a unilocular radiolucency with non-corticated borders surrounding an impacted left canine associated with radiopaque foci around the cusp tip. Based on the microscopic findings, the lesion was diagnosed as GCOC. Partial maxillectomy of the right maxilla was performed, and radiotherapy was administered. An obturator was made to support masticatory functions Three years later, the lesion showed complete bone remodeling and no signs of recurrence, and long-term follow-up was done regularly.

• Structural Engineering and Mechanics
• /
• v.85 no.5
• /
• pp.607-620
• /
• 2023

The classical optimal control (COC) method has been widely used for linear quadratic regulator (LQR) problems of structural control. However, the equation of motion of the structure is incorporated into the optimization model as the constraint condition for the LQR problem, which needs to be solved through the Riccati equation under certain assumptions. In this study, an explicit optimal control (EOC) method is proposed based on the explicit time-domain method (ETDM). By use of the explicit formulation of structural responses, the LQR problem with the constraint of equation of motion can be transformed into an unconstrained optimization problem, and therefore the control law can be derived directly without solving the Riccati equation. To further optimize the weighting parameters adopted in the control law using the gradient-based optimization algorithm, the sensitivities of structural responses and control forces with respect to the weighting parameters are derived analytically based on the explicit expressions of dynamic responses of the controlled structure. Two numerical examples are investigated to demonstrate the feasibility of the EOC method and the optimization scheme for weighting parameters involved in the control law.

• Journal of Acupuncture Research
• /
• v.20 no.5
• /
• pp.159-171
• /
• 2003

Objective: To study on the anti-cancer, anti-metastasis and immune response improvement effects of Herbal-acupuncture with Asparagus cochinchinensis infusion solution. Methods: we put into Chung-wan(CV12) and Kwanwon(CV4) of C57bl/6 which are corresponding to human body with Asparagus coc hinchinensis infusion solution. We observed the effect on the expres sion of MMP-9. the expression of cytokine gene, number of pulmon ary colony, histological analysis on tissue metastasis of lung and liver. the expression of cytokine gene on PBMC. the number of $CD3e^+/CD4^+$. $CD3e^+/CD8^+$, $NK^+$ cell. Results: The results were obtained as follows I) The effect on expression of MMP-9. the expression of cytokine gen e was inhibited significantly in all the sample groups. compared with control group. 2) In pulmonary colony, sample groups were decreased significantly, compared with control group. especially, the group put into Chung-wan(CV12) was decreased significantly. 3) Histological analysis of sample groups inhibited significantly in all th e sample groups compared with that control groups in both of lung and liver. especially, the group put into Chung-wan(CV12) was inhibited significantly. 4) The effect on cytokine gene expression on PBMC of all the sample groups were increased significantly, compared with control group. 5) In flow cytometry, $CD3e^+/CD4^+$ $CD3e^+/CD8^+$, $NK^+$ cell in sample groups were increased compared with control group.

• Proceedings of the KSAR Conference
• /
• 2003.06a
• /
• pp.83-83
• /
• 2003

돼지 난자의 유리화 동결 처리 방법 중 난자를 담는 용기(loading vessel)의 재료로 최근에 알려진 것으로 open-pulled straws(OPS)[Vajta등, Mol Reprod Dev, 51:53-58, (1998)], electron microscope grids(EMG) [Martino등,Biol Reprod, 54:1059-1069, (1996)〕, nylon loop system(NLS) [Lane등, Fertil Steril,72: 1073-1078, (1999)] 등이 보고되고 있다. OPS는 1/4cc straws를 열을 가하여 길게 뽑아 내벽을 얇게 함으로써 filing된 난자나 수정란이 액체 질소와 접촉했을 때 유리화가 신속하게 되도록 하는 방법으로 돼지에서는 별로 보고된 것이 없다. EMG는 열전도가 예민한 전자현미경용 copper grid를 이용한 방법으로 최근 국내 기술진의 연구성적을 포함한 몇몇 학자들에 의하여 보고되었고 NLS는 0.5mm직경의 nylon loop를 이용하여 급속 동결한 성적이 보고되었으나, 돼지 난자에 응용 된 것은 없다. 따라서 이와 같은 동결 재료는 사람과 반추류, mouse외에 돼지 난자에 대하여는 전혀 시도되지 않았지만 유리화 동결기술에서 가장 중요한 실험으로 생각된다. 성공적인 유리화 동결을 위해서는 수정란이 냉각의 전도성이 빠르고, 작은 용액을 수정란과 같이 filling해야 하며 모든 동작이 신속 간편해야 하며 융해 방법도 초급속도의 융해가 요구되므로 이에 부합되어야 한다. 연구 목적은 돼지 난자를 유리화 동결/융해 시 동결 재료-straw/glass, copper grid, nylon 3가지에 대한 제작 방법, 난자 loading, 동결 처리, 보관 방법, 융해 방법 등을 난자의 회수, 수정 후 생존율을 비교 조사하여 가장 우수한 방법을 선택할 목적이었다. 수행 내용은 3가지의 재료의 sample을 제작하고 소독한 다음 준비된 돼지 COCs을 40시간동안 IVM한 후 난자를 5~l5개 정도로 선정 하여 준비된 VS 용액에 평형처리 하였다. 각 재료의 용기에 loading 한 후 동결/보관하였고, 융해는 역순으로 평형하여 maturation 배지에 3~4시간 배양한 다음 경검하고 IVF한 후 NCSU-23 배지에 담아 IVC 배양하면서 cell cleavage상태를 확인하였다.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.12
• /
• pp.4977-4980
• /
• 2015

Background: ASC-US cases are managed according to the current American Society for Colposcopy and Cervical Pathology (ASCCP) guideline in which a human papillomavirus (HPV) test and repeat Pap smear are performed in the next 1 year. Colposcopy in cases of positive high risk HPV and persistent ASC-US or more in subsequent Pap smear is recommended. The HPV test is more expensive and still not currently a routine practice in Thailand. Objective: To identify the risk factors of persisted abnormal Pap smear and the colposcopic requirement rate in women with ASC-US. Materials and Methods: During 2008-2013, this study was conducted in Prapokklao Hospital, Chanthaburi, Thailand. Participants were women who attended gynaecology clinic for cervical cancer screening. Women who had cytological reports with ASC-US were recruited. During the study period, 503 cases were enrolled. Colposcopic requirement was defined as those who were detected with an ASC-US or more in subsequent Pap smears up to 1 year follow-up. Results: The colposcopic referral rate was 23.2 (85/365) percent at 12 months. Prevalence of cervical intraepithelial neoplasia (CIN) 2/3 was 3.3 (12/365) percent. Loss follow-up rate of subsequent Pap smear and colposcopic appointment were 27.4 (138/503) and 48.2 (41/85) percent, respectively. There was no invasive cancer. High risk factors for persisted abnormal Pap smears in subsequent test were premenopausal status, HIV infected patients and non-oral contraceptive pills (COC) users. Conclusions: Referral rate for colposcopy in women with ASC-US reports was rather high. Loss to follow-up rate was the major limitation. Immediate colposcopy should be offered for women who had high risk for silent CIN.