• Journal of Institute of Convergence Technology
• /
• v.11 no.1
• /
• pp.13-18
• /
• 2021

It is widely accepted that the prevention of global warming requires significant reductions in greenhouse gases, particularly CO₂ emissions. Although fossil fuel-based power plants account for the majority of CO₂ emissions, it is urgent to reduce CO₂ emissions in industries that emit large amounts of CO₂ such as steel, petrochemical, and oil refining. This paper examines the current status of CO₂ emission in the domestic oil refining industry and CO₂ emission sources in each unit process in the oil refining industry. Focusing on the previously developed CO₂ capture process, cases and applicability of greenhouse gas reduction in FCC and hydrogen manufacturing processes, which are major processes constituting the oil refining industry, are reviewed.

• Journal of the Korean Institute of Gas
• /
• v.25 no.4
• /
• pp.10-18
• /
• 2021

CO₂ storage technology in an aquifer is one of the most effective way to decrease global warming due to a high storage capacity and economics. A demonstration-scale offshore CO₂ storage project was performed in a geological deep aquifer in the Pohang Basin, Korea for a technological development of large-scale CO₂ storage. A challenging issue in the early design stage of the project was to establish the proper injectivity during CO₂ injection. To solve this issue, injection conditions were calculated by calculating injection rate, pressure, temperature, CO₂ phase change, and thermodynamic properties. For this study, we simulated and numerically analyzed CO₂ phase change from gas to supercritical phase and flow behavior in transport piping and injection tubing using OLGA program. Our results provide the injectivity conditions of CO₂ injection system combined with a bottomhole pressure of an aquifer.

• Journal of the Korean Magnetic Resonance Society
• /
• v.26 no.1
• /
• pp.10-16
• /
• 2022

The phase transition temperatures of CsCoCl₃·2H₂O crystals are investigated via differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). Three endothermic peaks at temperatures of 370 K (=T_C1), 390 K (=T_C2), and 416 K (=T_C3) were observed for phase transitions from CsCoCl₃·2H₂O to CsCoCl₃·1.5H₂O, to CsCoCl₃·H₂O, and then to CsCoCl₃·0.5H₂O, respectively. In addition, the spin-lattice relaxation time T_1ρ in the rotating frame and T₁ in the laboratory frame as well as changes in chemical shifts for ¹H and ¹³³Cs near T_C1 were found to be temperature dependent. Our analyses results indicated that the changes of chemical shifts, T_1ρ, and T₁ are associated with structural phase transitions near temperature T_C1. The changes of chemical shifts, T_1ρ, and T₁ near T_C1 were associated with structural phase transitions, owing to the changes in the symmetry of the structure formed of H₂O and Cs⁺ ions. Consequently, the structural symmetry in CsCoCl₃·2H₂O crystals based on temperature is discussed by the environments of their H and Cs nuclei.

• Applied Chemistry for Engineering
• /
• v.32 no.4
• /
• pp.393-402
• /
• 2021

In this study, a mixed matrix membrane was prepared by putting the zeolitic imidazolate framework-7 (ZIF-7) synthesized in Pebax-1657 and Pebax-2533, which are representative poly(ether-b-amide), and the permeability properties of single gas such as N₂ and CO₂ were investigated. From the gas permeation results, in the case of N₂, both the Pebax-1657/ZIF-7 and Pebax-2533/ZIF-7 mixed matrix membranes showed a similar phenomenon in which the permeability decreased with the incorporation of ZIF-7. For CO₂ permeability, the tendency was slightly different depending on the type of polymer. In the Pebax-1657/ZIF-7 mixed membrane, the CO₂ permeability decreased in the range of 0~3 wt% of ZIF-7, and increased at higher contents. The CO₂ permeability of the Pebax-2533/ZIF-7 mixed matrix membrane gradually decreased without increasing the permeability in the range of 0~5 wt% of ZIF-7. Regarding CO₂/N₂ selectivity, both mixed films showed a tendency to increase with increasing the ZIF-7 content. In particular, Pebax-2533/ZIF-7 5 wt% showed the best gas permeation performance compared to other mixed matrix membrane. This is thought to be because ZIF-7 shows better compatibility with Pebax-2533 than that of Pebax-1657 and also better CO₂ selective property.

• Korean Chemical Engineering Research
• /
• v.58 no.1
• /
• pp.150-162
• /
• 2020

The proprietary post-combustion CO₂ solvent (KoSol) developed by the Korea Electric Power Research Institute (KEPRI) was applied at the Shanghai Shidongkou CO₂ Capture Pilot Plant (China Huaneng CERI, capacity: 120,000 ton CO₂/yr) of the China Huaneng Group (CHNG) for performance evaluation. The key results of the pilot test and data on the South Korean/Chinese electric power market were used to calculate the predicted cost of CO₂ avoided upon deployment of CO₂ capture technology in commercial-scale coal-fired power plants. Sensitivity analysis was performed for the key factors. It is estimated that, in the case of South Korea, the calculated cost of CO₂ avoided for an 960 MW ultra-supercritical (USC) coal-fired power plant is approximately 35~44 USD/tCO₂ (excluding CO₂ transportation and storage costs). Conversely, applying the same technology to a 1,000 MW USC coal-fired power plant in Shanghai, China, results in a slightly lower cost (32~42 USD/tCO₂). This study confirms the importance of international cooperation that takes into consideration the geographical locations and the performance of CO₂ capture technology for the involved countries in the process of advancing the economic efficiency of large-scale CCS technology aimed to reduce greenhouse gases

• Korean Journal of Remote Sensing
• /
• v.39 no.2
• /
• pp.169-181
• /
• 2023

Recently, in order to reduce carbon dioxide (CO₂) emissions, which is the main cause of global warming, Korea has declared carbon emission reduction targets and carbon neutral. Accurate assessment of regional emissions and atmospheric CO₂ concentrations is becoming important as a result. In this study, we identified the spatiotemporal differences between satellite-based atmospheric CO₂ concentration and CO₂ emissions for the Korean Peninsula region using column-averaged CO₂ dry-air mole fraction from the Orbiting Carbon Observatory-2 and emission inventory. And we explained these differences using solar-induced fluorescence (SIF), a photosynthetic reaction index according to vegetation growth. The Greenhouse Gas Inventory and Research Center (GIR) and Emissions Database for Global Atmospheric Research (EDGAR) emissions continued to increase in Korea from 2014 to 2018, but the satellite-based atmospheric CO₂ concentration decreased in 2018, respectively. Regionally, GIR and EDGAR emissions increased in 2018 in Gyeonggi-do and Chungcheongbuk-do, but satellite-based CO₂ concentrations decreased for the corresponding years. In addition, the correlation analysis between emissions and satellite-based CO₂ concentration showed a low correlation of 0.22 (GIR) and 0.16 (EDGAR) in Seoul and Gangwon-do. Atmospheric CO₂ concentrations showed a different correlation with SIF by region. In the CO₂-SIF correlation analysis for the growing season (May to September), Seoul and Gyeonggi-do showed a negative correlation coefficient of -0.26, Chungcheongbuk-do and Gangwon-do showed a positive correlation coefficient of 0.46. Therefore, it can be suggested that consideration of the CO₂ absorption process is necessary for analyzing the relationship between the atmospheric CO₂ concentration and emission inventory.

• Journal of Sensor Science and Technology
• /
• v.29 no.4
• /
• pp.215-219
• /
• 2020

MnCo₂S₄/CoS₂ electrode with highly accessible electroactive sites is prepared using the hydrothermal method. The electrode exhibits an areal capacitance of 0.75 Fcm^-2 at 6 mAcm^-2 in 1 M KOH. The capacitance is further increased to 2.06 Fcm^-2 by adding K₃Fe(CN)₆ and K₄Fe(CN)₆ (a redox couple) to KOH. This increment is associated with the redox-active properties of cobalt and manganese transition metals, as well as the ion pair of [Fe(CN)₆]^-3/[Fe(CN)₆]^-4. The capacitance retention of the MnCo₂S₄/CoS₂ electrode is 87.5% for successive 4000 charge-discharge cycles at 10 mAcm^-2 in a composite electrolyte system of KOH and ferri/ferrocyanide. The capacitance enhancement is supported by the lowest equivalent series resistance (0.62 Ωcm^-2) of MnCo₂S₄/CoS₂ in the presence of redox additive couple compared with the bare KOH electrolyte.

• Journal of the Korean Chemical Society
• /
• v.51 no.6
• /
• pp.595-599
• /
• 2007

• Korean Chemical Engineering Research
• /
• v.47 no.5
• /
• pp.646-650
• /
• 2009

Hydrocarbon gases generated from the gasification of waste could be converted into $CO_2$ and $H_2$ using reforming catalysts and then $CO_2$ was selectively adsorbed and removed to obtain pure hydrogen. To optimize adsorption efficiency for $CO_2$ removal, $Na_2CO_3$ was supported on nanoporous alumina and the efficiency was compared with commercial alumina(Degussa). Nanoporous adsorbents formed more uniform pores and larger surface area compared to adsorbents using commercial alumina. The increase of $Na_2CO_3$ loading improved adsorption of $CO_2$. Finally, the highest adsorption capacity per unit mass of $Na_2CO_3$ could be achieved when the loading of $Na_2CO_3$ reached up to 20wt%. When the content of $Na_2CO_3$ increased above 20 wt%, it aggregated on the surface, and the pore volume was decreased. Used adsorbents could be recycled by the thermal treatment.

• Journal of the Korea Institute of Building Construction
• /
• v.24 no.1
• /
• pp.11-21
• /
• 2024

This research elucidates the fundamental properties of carbon dioxide (CO₂)-cured mortar as influenced by varying substitution rates of blast furnace slag fine powder. The findings indicate that CO₂ curing enhances the formation of calcium carbonate (CaCO₃), contributing to pore reduction and the early development of strength. While calcium hydroxide (Ca(OH)₂) plays a more pivotal role in the primary development of strength compared to CaCO₃, an increase in the substitution rate of blast furnace slag fine powder results in reduced production of Ca(OH)₂. Nonetheless, the maintenance of strength through CaCO₃ formation is observed even after the depletion of Ca(OH)₂, suggesting that the required performance can be sustained post-exposure to the atmosphere following CO₂ curing. It is noted that substitution rates exceeding 50% lead to performance deterioration due to CO₂, highlighting the necessity for careful adjustment of the substitution ratio.