• Bulletin of the Korean Chemical Society
• /
• v.8 no.5
• /
• pp.389-393
• /
• 1987

The oxidation of carbon monoxide by gaseous oxygen on 0.53, 1.02, and 1.51 mol $\%$CoO-doped $-Fe_2O_3$ catalysts has been investigated in the temperature range from 340 to 480$^{\circ}C$ under various CO and $O_2$ partial pressures. The oxidation rates have been correlated with 1.5-order kinetics; the 0.5-order with respect to $O_2$ and the first-order with respect to CO. In the above temperature range, the activation energy is 0.34 $\pm$ 0.01 eV${\cdot}$$mol^{-1}$. The electrical conductivity of 0.53, 1.02, and 1.51 mol %CoO-doped $\alpha$-$Fe_2O_3$ has been measured at 350$^{\circ}C$ under various $P_{CO}and $P_{O_2}$. From the conductivity data it was found that $O_2$ was adsorbed on Vo formed by doping with CoO, while CO appeared essentially to be chemisorbed on the lattice oxygen of the catalyst surface. The proposed oxidation mechanism and the dominant defect were supported by the agreement between the kinetic data and conductivities.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.32 no.12
• /
• pp.963-969
• /
• 2008

The performance behavior of solid oxide fuel cell using $H_2$ and CO as fuels was investigated. The power densities and impedance results showed a little variation as the ratio of $H_2$ and CO changed. However, when the pure CO was used as a fuel, area specific resistance (ASR), especially low frequency region, was increased. This might be due to carbon deposition on anode. The maximum power density was 60% lower using CO than using $H_2$. Carbon deposition reduced after constant current was applied. The SOFC performance was recovered from the carbon deposition after applying constant current during 100h.

• Journal of the Korean Chemical Society
• /
• v.35 no.1
• /
• pp.3-15
• /
• 1991

The gaseous mixtures of iso-propanol of 10 torr with carbon dioxide of 0∼1990 torr were irradiated with Co-60 gamma radiation up to 50 kGy, and the products such as carbon monoxide, acetone, methane, ethane, C$_3$H$_a$, C$_4$H$_b$ and tert-butanol were analyzed by gas chromatography. G(CO) value of 4 was obtained from the gas mixtures containing more than 490 torr of carbon dioxide. The production rates of the organic products and the decomposition rate of iso-propanol increased linearly with the pressure of carbon dioxide, and G(-iso-Propanol) and G(Acetone) values increased by 4 and 2, respectively, with each 10 torr increment of carbon dioxide pressure. The mechanisms of the radiolytic decomposition of iso-propanol and the production of carbon monoxide and organic materials are discussed on the basis of the experimental results of the present study.

• Journal of the Korean Institute of Gas
• /
• v.25 no.3
• /
• pp.27-38
• /
• 2021

We devised the system to automatically shutdown the boiler and to fundamentally block the harmful gases, including carbon monoxide, into the indoor when the exhaust system swerves: (1) The discharge pressure of the exhaust gas decreases when the exhaust pipe is disconnected. The monitoring system of the exhaust pipe is implemented by measuring the output voltage of APS(Air Pressure Sensor) installed to control the amount of combustion air. (2) The operating software was modified so that when the system recognizes the fault condition of a flue pipe, the boiler control unit displays the fault status on the indoor regulator while shutting down the boiler. In accordance with the ventilation facility standards in the "Rules for Building Equipment Standards" by the Ministry of Land, Infrastructure and Transport, experiments were conducted to ventilate indoor air. When carbon monoxide leaked in worst-case scenario, it was possible to prevent poisoning accidents. However, since 2013, the number of indoor air exchange times has been mitigated from 0.7 to 0.5 times per hour. We observed the concentration exceeding TWA 30 ppm occasionally and thus recommend to reinforce this criterion. In conclusion, if the flue pipe fault detection and the indoor air ventilation system are introduced, carbon monoxide poisoning accidents are expected to decrease significantly. Also when the manufacturing and inspection steps, the correct installation and repair are supplemented with the user's attention in missing flue, it will be served to prevent human casualties from carbon monoxide poisoning.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.40 no.3
• /
• pp.315-320
• /
• 2020

Pellets are manufactured using wood by-products. The combustion efficiency of pellets depends on the pellet manufacturing process, the types of materials mixed while manufacturing and the wood pellet stoves themselves. In this study, we developed a multi-layer combustor to be used in a wood pellet stove, for the purpose of reducing environmental pollution and energy waste due to incomplete combustion. The multi-layer combustor was designed to compensate for the shortcomings of existing combustors. A CAD (Computer Aided Design) model was verified using a 3D printer and a prototype was developed. The combustion experiments were conducted on commercial and proposed combustors using pellets of the same brand, manufacturing date, place and specifications. From the experiments, it was found that the proposed combustor produced the lowest carbon monoxide (CO) emission and highest thermal efficiency.

• Journal of The Korean Society of Clinical Toxicology
• /
• v.21 no.2
• /
• pp.108-116
• /
• 2023

Purpose: This study investigated the differences between patients with acute carbon monoxide (CO) poisoning who visited the emergency department (ED) before and during the coronavirus disease 2019 (COVID-19) pandemic. Methods: This was a single-center retrospective observational study. Patients with CO poisoning who visited the ED during the period from February 2020 to January 2023 were classified as the COVID-19 pandemic group, and those from February 2019 to January 2020 were classified as the non-pandemic group. Patients' medical records were reviewed, their demographic and clinical characteristics were compared, and the length of stay in ED was checked. The time from admission to the ED to the start of hyperbaric oxygenation (HBO) was defined as the door-to-HBO time, and this parameter was compared between both groups. Results: In total, 672 patients were included in this study. The proportion of intentional poisoning was significantly higher in the COVID-19 pandemic group than in the non-pandemic group (p=0.028). The proportion of intentional poisoning significantly increased in the 20- to 29-year-old age group during the COVID-19 pandemic (p<0.001). In addition, it took longer to initiate HBO in the COVID-19 pandemic group than in the non-pandemic group (p=0.001). Conclusion: These findings suggest that pandemics of infectious diseases, such as COVID-19, increase the proportion of intentional CO poisoning, and it may take longer to initiate HBO after visiting the ED. Efforts will be needed to decrease intentional CO poisoning and length of stay in ED.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.3
• /
• pp.282-290
• /
• 2013

A primary air pollutant as an indicator of air quality released from incomplete combustion is Carbon monoxide. A study of the distributions of CO concentration with no heat source in a tunnel model closed at left end side is simulated with a commercial CFD code. The tunnel model is used to investigate the CO concentration distributions at three Reynolds numbers of 990, 1970, and 3290. which are computed by the inlet velocities of 0.3, 0.6 and 1.0 m/s. The CFD predictive approaches can be useful for a better design to analyze the distributions of CO concentrations. In the case of the tunnel model closed at left end side alone, the concentration changes of x/H=-5 and -2.5 have the similar laminar characteristics like the case of the tunnel model closed at both end sides expecially at low values of Reynolds number. Irregular average CO concentration variations at Re=1790 are considered that the transition from laminar to turbulent flow occurs even in three different tunnel models.

• Korean Journal of Microbiology
• /
• v.24 no.3
• /
• pp.270-275
• /
• 1986

The localization of carbon monoxide dehydrogenases (CO-DHs) in Pseudomonas carvoxydovorans and Acinetobacter sp.1 was examined by comparison of the distribution of CO-oxidizing activity between soluble and particulate fractions obtained after disruption of CO-grown cells by sonic oscillation and of spheroplasts by osmotic shock. When the cells were broken by sonic oscillation, most of the CO-DH activity was recovered from soluble fractions. However, disryption by osmotic lysis of spheroplasts revealed that the enzyme activity is present in the cell membrane. The results indicated the CO-DHs in these cells are loosely attached to the cytoplasmic membrane.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.6
• /
• pp.1224-1228
• /
• 2008

The reaction of internal diynes and cyclopentadiene in the presence of 5 mol % of cobalt catalysts proceeded under 5 atm of carbon monoxide pressure to give a high yield of the corresponding [2+2+2] cycloaddition product. By lowering carbon monoxide pressure from 30 atm to 5atm, cyclopentadiene can be used as a dienophile in the cobalt carbonyl-catalyzed [2+2+2] cycloaddition reaction between internal diynes and cyclopentadiene.

• IMMUNE NETWORK
• /
• v.9 no.1
• /
• pp.12-19
• /
• 2009

Heme oxygenase (HO)-1 is an inducible enzyme that catalyzes the first and rate-limiting step in the oxidative degradation of free heme into ferrous iron, carbon monoxide (CO), and biliverdin (BV), the latter being subsequently converted into bilirubin (BR). HO-1, once expressed during inflammation, forms high concentrations of its enzymatic by-products that can influence various biological events, and this expression is proven to be associated with the resolution of inflammation. The degradation of heme by HO-1 itself, the signaling actions of CO, the antioxidant properties of BV/BR, and the sequestration of ferrous iron by ferritin all concertedly contribute to the anti-inflammatory effects of HO-1. This review focuses on the anti-inflammatory mechanisms of HO-1 actions and its roles in inflammatory diseases.