• 열처리공학회지
• /
• 제13권5호
• /
• pp.355-359
• /
• 2000

Ion beam assisted deposition system was used to deposit CNx coatings with various thickness on the substrates of high-frequency induction hardened steels. Rolling contact fatigue tests were performed using Polymet RCF-1 machine with a constant supply of lubricant. Rolling contact fatigue life was substantially different in the steels with various thickness of CNx coatings. The optimum thickness of CNx coating was found to be $8.9{\mu}m$, showing the longest fatigue life, mainly caused by higher resistance to initiation of cracks and protective overcoat remaining to the surface failure during rolling contact fatigue. Cracks were initiated in the substrates under the surface of wear track and propagated to the surface, which eventually resulted in the failure. The reduction of fatigue life observed in the specimen with elimination of CNx coating during rolling contact fatigue was explained by the substrates deformation.

• 열처리공학회지
• /
• 제22권5호
• /
• pp.290-297
• /
• 2009

In case of using Asymmetric Bipolar Pulsed DC (ABPD) power generator, thin film is efficiently deposited as ions are getting higher energy by suppressing target poisoning and electric arc. In this article, the mechanical properties of CNx thin films deposited on the STS 316L were compared with DC and ABPD power generators. The CNx thin films deposited with ABPD clearly improved wear resistance by higher ratio of sp3CN as compared with DC. Nb interlayer affected to increase the value of 10N of adhesion between CNx thin films and substrate. But, CNx thin films deposited with ABPD couldn't endure to wear load and decreased wear resistance as the films were too thinner than substrate. Nevertheless the higher substrate bias energy applied to perform the dense films, it wasn't shown benefits about the wear properties from DC sputtering. But, in case of using ABPD sputtering, the wear resistance was largely improved without changing morphology despite of thin films.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.1591-1593
• /
• 2008

The tubular field emission lamp (FEL) was developed using a wire type carbon-nano-structure emitter called CNX The luminous efficiency of the tubular FEL (diode type, diameter: ${\varphi}15.5mm$, length: 200mm) has already achieved around 45lm/W and we expect to achieve over 60lm/W within the year.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 proceedings of the second asia international conference on tribology
• /
• pp.155-156
• /
• 2002

During the sliding between a-CNx and $Si_3N_4$, applying nitrogen as environmental gas provided very low friction as the level of 0.01 in friction coefficient. In order to know the effect of the running-in process on the reduction of the friction, the effect of surface roughness of mating surface on friction was investigated. It was shown that smooth surface in wear scar of ball provided low friction coefficient. Friction coefficient after running-in was proportional to the Ry value of wear scar of ball. Also smooth thin transferred layer was observed on the wear scar of balls with an AFM after sliding test. Those results showed the smoothing of wear scar of ball, the generating of the transferred layer from CNx was necessary for low friction.

• Tribology and Lubricants
• /
• 제27권5호
• /
• pp.264-268
• /
• 2011

In this study, we examined the friction characteristics of a dimple pattern on a carbon nitride coating. The study was conducted with a hexagonal array 40 ${\mu}m$ dimple pattern on a steel bearing containing a CNx coating. The area density of the dimple patterns were varied between 5% and 25%, the speed was varied from 0.06-0.26 m/s, and the load was varied between 20-100N. In general, we found that as the velocity increased, the friction coefficient increased. Furthermore, the friction coefficient was lowest at a load of 40N. The friction coefficient of the non-coated specimen was 0.025-0.15; on the other hand, the friction coefficient of the coated specimen was 0.002-0.02. Thus, we determined that the coated materials could reduce the friction coefficient by a factor of 7.5.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제37회 하계학술대회 초록집
• /
• pp.242-242
• /
• 2009

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2008년도 제34회 동계학술대회 초록집
• /
• pp.359-359
• /
• 2008

• 한국진공학회지
• /
• 제12권1호
• /
• pp.70-77
• /
• 2003

전이금속을 촉매로 이용하여 화학기상증착법 (CVD)으로 탄소나노튜브 (CNT)를 성장시킬 때, 질소분위기가 성장을 증진시킨다는 사실은 잘 알려져 있다. 본 논문에서는 질소분위기에 의한 CNT 성장증진의 원인이 활성화 질소이며, 활성화 질소가 성장과정 중 CNT의 탄소와 결합함으로써 성장증진효과가 일어남을 보여주었다. 이 결과는 질소의 결합이 튜브상의 흑연판을 만드는데 필요한 탄성변형에너지를 낮추어 주는 역할을 한다는 CNx 박막의 이론적 계산결과와 일치한다. 따라서, 질소의 결합에 의한 CNT의 성장증진 효과는 튜브상의 흑연판 핵 생성과 CNT의 성장에 필요한 임계 에너지의 감소에 의한 것이다.

• The Journal of Asian Finance, Economics and Business
• /
• 제7권11호
• /
• pp.95-100
• /
• 2020

Nifty Bank Index has started trading in futures and options (F&O) segment from 13^th June 2005 in National Stock Exchange. The purpose of the study is to enhance the literature by examining expiration effect on the price volatility and price reversal of Underlying Index in India. Historical data used for the current study primarily comprise of daily close prices of Nifty Bank which is the only equity sectoral index in India which is traded in derivatives market and its Future contract value is derived from the underlying CNX Bank Index during the period 1^st January 2010 till 31^st March 2020. To check stationarity of the data, Augmented Dicky Fuller test was used. The study employed ARMA- EGARCH model for analysing the data. The empirical results revealed that there is no effect on the mean returns of underlying Index and EGARCH (1,1) model furthermore shows there is existence of leverage effect in the Bank Index i.e., negative shocks causes more fluctuations in the Index than positive news of similar magnitude. The outcome of the study specifies that there is no effect on volatility on the underlying sectoral index due to expiration days and also observed no price reversal effect once the expiration days are over.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2006년도 제31회 학술논문발표회 초록집
• /
• pp.191-191
• /
• 2006