• 한국분말재료학회지
• /
• 제23권3호
• /
• pp.235-239
• /
• 2016

This study is performed to fabricate a Ti porous body by freeze drying process using titanium hydride ($TiH_2$) powder and camphene. Then, the Ti porous body is employed to synthesize carbon nanotubes (CNTs) using thermal catalytic chemical vapor deposition (CCVD) with Fe catalyst and methane ($CH_4$) gas to increase the specific surface area. The synthesized Ti porous body has $100{\mu}M$-sized macropores and $10-30{\mu}m$-sized micropores. The synthesized CNTs have random directions and are entangled with adjacent CNTs. The CNTs have a bamboo-like structure, and their average diameter is about 50 nm. The Fe nano-particles observed at the tip of the CNTs indicate that the tip growth model is applicable. The specific surface area of the CNT-coated Ti porous body is about 20 times larger than that of the raw Ti porous body. These CNT-coated Ti porous bodies are expected to be used as filters or catalyst supports.

• Composites Research
• /
• 제36권6호
• /
• pp.408-415
• /
• 2023

질소 도핑에 의한 Pyridinic-N, Pyrrolic-N, Graphitic-N과 같은 결합 구성의 형성은 탄소나노소재의 물리적 특성을 조절하거나 새로운 물성을 부여하는 중요한 역할을 한다. 본 연구에서는 멜라민을 도펀트 소스로 혼합하여 탄소 나노튜브(CNT)의 질소 결합 구성을 조절하는 간단하고 비용 효율적인 접근 방식을 제안한다. Stirring, Bath sonication 및 Tip sonication과 같은 세 가지 기계적 방법을 통해 멜라민을 탄소나노튜브와 혼합한 후 열처리를 통해 질소 도핑을 진행하였다. CNT 대비 멜라민 비율이 높을수록 Pyrrolic-N의 비율이 높게 나타났으며 Stirring을 통해 혼합한 경우 가장 높은 Pyridinic-N의 비율을 나타내었다. 본 연구에서 제안한 방법은 기계적인 혼합 방법을 이용해 탄소나노튜브에 다양한 종류의 질소 도펀트를 선택적으로 형성할 수 있는 손쉬운 방법으로, 향후 질소가 도핑된 탄소나노물질의 응용을 용이하게 할 것으로 기대된다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1269-1270
• /
• 2007

Carbon nanotubes (CNTs) are directly grown on W-tips at $700^{\circ}C$ using an ICP-CVD method. Sharpening of W-tip is done by electrochemical etch and their diameters are limited to range from $3{\mu}m$ to $5{\mu}m$. Catalysts for CNTs growth are formed by RF and DC co-sputtering systems using Ni and Co. The composition ratio of Ni and Co has been evaluated by energy dispersive x-ray spectroscopy (EDS). The micro-images of CNTs are monitored by field emission scanning electron microscope (FESEM). It is observed from Raman study that the intensity of the D-peak is increased by increasing the amount of Co catalyst. Furthermore, the measurement of field emission properties of CNTs show that the CNT grown on a single Co catalyst possess the greatest performance such as $V_{th}$=1,115V and $I_{max}=164{\mu}A$.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.1408-1409
• /
• 2011

Carbon nanotubes (CNTs) were grown on conical tip substrates by using various methods such as electrophoretic deposition, dip-coating, and spray. The scanning electron microscope measurement showed that the spray method ascertained the most uniform deposition of CNTs. The CNT-emitter that was fabricated by the spray method revealed the lowest turn on voltage of electron emission and the highest emission current. In addition, the spray-produced CNT emitter showed the most stable long-term emission characteristics.

• 한국분말재료학회지
• /
• 제15권3호
• /
• pp.188-195
• /
• 2008

Carbon nanotube (CNT)/$Mg_2Ni$ composites were synthesized to enhance the hydrogen storage properties. The emphasis was made on the effect of different shortening methods of CNTs on the open-tip structure and the resulting properties. The use of open CNTs as a starting material resulted in an enhanced hydrogen properties of CNT/$Mg_2Ni$ composites. Among the employed methods for the shortening of CNTs, wet milling using ethanol was the most efficient, while ultrasonic acid treatment or thermal decomposition resulted in a less hydrogen storage capacity.

• 한국전기전자재료학회논문지
• /
• 제17권2호
• /
• pp.212-216
• /
• 2004

In this paper, we have fabricated a triode field emitter using carbon nanotubes (CNTs) directly grown by thermal chemical vapor deposition(CVD) method as an electron omission source. Vertically aligned CNTs have been grown in the center of the gate hole, to the size of 1.5 ${\mu}{\textrm}{m}$ in diameter, with help of a sacrificial layer of a type generally used in metal tip process. By the method of tilling the substrate, we made CNTs emitters both with and without SiO$_2$layer, a sidewall protector, deposited on sidewall of gate. After that we researched the electrical characteristics about two types of emitters. In effect, a sidewall protector can enhance the electrical characteristics by suppressing the problem of short circuits between the gate and the CNTs. The leakage current of an emitter with a sidewall protector is approximately sevenfold lower than that of an emitter without it at a gate voltage of 100 V.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.164-165
• /
• 2007

The effect of hydrogen and oxygen plasma treatments on the structural properties of carbon nanotubes (CNTs) has been systematically investigated. The plasma treatment resulted in the removal of the amorphous carbon particles. As the plasma treatment time was longer, the CNT diameter was reduced, regardless of gas types. Especially, for the sample treated in hydrogen plasma, the catalyst metal on the tip of CNTs was eliminated.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.125-128
• /
• 2004

AFM(Atomic Force Microscope) becomes a versatile tool in the nanoscale measurements and processes. Especially the tapping mode is a very useful mode in AFM operation to measure and process at the nanoscale. Although the tapping mode has a great potential for the novel techniques such as phase imaging, however, it is not clearly known the fundamental mechanics affected by complex tip-sample interactions. This paper shows the various nonlinear dynamic features in tapping mode AFM microcantilevers including hysteretic jumps and period doublings of the microcantilevers. Also it is discussed the complex dynamics of CNT(Carbon Nanotube) probes and the opportunities on the nanoscale nonlinear dynamics.

• 마이크로전자및패키징학회지
• /
• 제9권4호
• /
• pp.55-60
• /
• 2002

본 연구는 $580^{\circ}C$의 저온에서 ICPHFCVD(inductively coupled plasma hot filament chemical vapor deposition)를 이용하여 탄소나노튜브를 수직성장 시키는 것을 나타낸 것이다. 또한, 탄소나노튜브의 끝단에 존재하는 Ni-tip을 비성질 탄소같은 탄소질 물질등의 서로 다른 에칭특성에 기초하여 RF plasma를 이용하여 일회 공정으로 불순물을 정제하고, 고찰하였다. 정제된 이후의 탄소나노튜브는 속이 비어있는 다중벽 탄소나노튜브로 나타났으며, 성장된 탄소나노튜브는 외경과 내경은 50 nm와 25 nm였다. 또한, 탄소나노튜브의 graphite 층의 총수는 약 82개 층으로 구성되었으며, 층과 층간의 거리는 0.34nm였다. 그리고 TEM 관찰 결과, 탄소나노튜브 tip의 Ni촉매는 계속적인 에칭 공정에 의해 효과적으로 제거 되었다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2009년도 춘계학술발표대회
• /
• pp.31.1-31.1
• /
• 2009

Carbon nanotubes (CNTs) are attractive material because of their superior electrical, mechanical, and chemical properties. Furthermore, their geometric features such as a large aspect ratio and a small radius of curvature at tip make them ideal for low-voltage field emission devices including backlight units of liquid crystal display, lighting lamps, X-ray source, microwave amplifiers, electron microscopes, etc. In field emission devices for display applications, the phosphor anode is positioned against the CNT emitters. In most case, light generated from the phosphor by electron bombardment passes through the anode front plate to reach observers. However, light is produced in a narrow depth of the surface of the phosphor layer because phosphor particles are big as much as several micrometers, which means that it is necessary to transmit through the phosphor layer. Hence, a drop of light intensity is unavoidable during this process. In this study, we fabricated a transparent cathode back plate by depositing an ultra-thin film of single walled CNTs (SWCNTs) on an indium tin oxide (ITO)-coated glass substrate. Two types of phosphor anode plates were employed to our transparent cathode back plate: One is an ITO glass substrate with a phosphor layer and the other is a Cr-coated glass substrate with phosphor layer. For the former case, light was radiated from both the front and the back sides, where luminance on the back was ~30% higher than that on the front in our experiments. For the other case, however, light was emitted only from the cathode back side as the Cr layer on the anode glass rolled as a reflecting mirror, improving the light luminance as much as ~60% compared with that on the front of one. This study seems to be discussed about the morphologies and field emission characteristics of CNT emitters according to the experimental parameters in fabricating the lamps emitting light on the both sides or only on the cathode back side. The experimental procedures are as follows. First, a CNT aqueous solution was prepared by ultrasonically dispersing purified SWCNTs in deionized water with sodium dodecyl sulfate (SDS). A milliliter or even several tens of micro-liters of CNT solution was deposited onto a porous alumina membrane through vacuum filtration. Thereafter, the alumina membrane was solvated with the 3 M NaOH solution and the floating CNT film was easily transferred to an ITO glass substrate. It is required for CNT film to make standing CNTs up to serve as electron emitter through an adhesive roller activation.