• Journal of Sensor Science and Technology
• /
• v.27 no.1
• /
• pp.6-12
• /
• 2018

In this paper, a 32-variable pulse position modulation (32-VPPM) scheme is proposed to support a red-green-blue light-emitting-diode (RGB-LED)-based optical camera communication (OCC) system. Our proposed modulation scheme is designed to enhance the OCC data transmission rate, which is targeted for the wearable biomedical data monitoring system. The OCC technology has been utilized as an alternative solution to the radio frequency (RF) wireless system for long-term self-healthcare monitoring. Different biomedical signals, such as electrocardiograms, photoplethysmograms, and respiration signals are being monitored and transmitted wirelessly from the wearable biomedical device to the smartphone receiver. A common 30 frames per second (fps) smartphone camera with a CMOS image sensor is used to record a transmitted optical signal. Moreover, the overall proposed system architecture, modulation scheme, and data demodulation are discussed in this paper. The experimental result shows that the proposed system is able to achieve > 9 kbps using only a common smartphone camera receiver.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.10a
• /
• pp.536-538
• /
• 2017

UHD high speed digital camera system will be installed around launch pad and launch complex tower to acquire high speed image for motion analysis of integral parts of launch vehicle during the lift-off of KSLV-II in the Naro space center. In this paper, We compared configuration of high speed digital camera system operating in the Naro space center with UHD high speed digital camera system for mission of KSLV-II.

• Journal of Sensor Science and Technology
• /
• v.29 no.2
• /
• pp.123-127
• /
• 2020

In this paper, the estimation of the disparity for depth extraction in monochrome complementary metal-oxide-semiconductor (CMOS) image sensors with offset pixel apertures is presented. To obtain the depth information, the disparity information between two different channel data of the offset pixel apertures is required. The disparity is caused by the difference in the response angle between the left- and right-offset pixel aperture images. A depth map is implemented by the generated disparity. Therefore, the disparity is the most important factor for realizing 3D images from the designed CMOS image sensor with offset pixel apertures. The disparity is influenced by the pixel height and offset value of the offset pixel aperture. To confirm this correlation, the offset value is set to maximum within the pixel area, and the disparity values corresponding to the difference in the heights are calculated and compared. The disparity is derived using the camera-lens formula. Two monochrome CMOS image sensors with offset pixel apertures are used in the disparity estimation.

• The Journal of the Korea Contents Association
• /
• v.20 no.10
• /
• pp.1-13
• /
• 2020

There are many factors that influence the image quality of CMOS camera images, among which the image exposure time is an important factor. If the image exposure time is long, the entire image on the screen becomes brighter. If the exposure time is shorter, the entire image becomes darker. When photographing a still image, real time is not required because the automatic exposure system is given sufficient time to obtain an appropriate exposure time. However, if the surroundings and environment change rapidly like the black box of a driving car, the exposure time should be applied in response to real time. To this end, a robust automatic exposure system for real-time performance and ambient light environment is required. An automatic exposure system that has real-time capability and is robust against the ambient light environment is required. we designed a real-time control sysem capable of parallel operation processing through the design of an embedded system using zynq's logic and ARM core, and developed a real-time CMOS automatic exposure system that is robust to noise and converges to a desired target value within 66 ms through PID control.

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.8
• /
• pp.743-748
• /
• 2007

Recently, various types of camera mouse are developed using the image processing. The camera mouse showed limited performance compared to the traditional optical mouse in terms of the response time and the usability. These problems are caused by the mismatch between the size of the monitor and that of the active pixel area of the CMOS Image Sensor. To overcome these limitations, we designed a new input device that uses the face recognition as well as the speech recognition simultaneously. In the proposed system, the area of the monitor is partitioned into 'n' zones. The face recognition is performed using the web-camera, so that the mouse pointer follows the movement of the face of the user in a particular zone. The user can switch the zone by speaking the name of the zone. The multimodal mouse is analyzed using the Keystroke Level Model and the initial experiments was performed to evaluate the feasibility and the performance of the proposed system.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.22 no.10
• /
• pp.864-869
• /
• 2009

The measurement of contact wire uplift in electric railways is one of the most important test parameters to accepting the maximum permitted speed of new electric vehicles and pantographs. The contact wire uplift can be measured over short periods when the pantograph passes monitoring stations. In this paper, a high-speed image measurement system and its image processing method are being developed to evaluate dynamic uplift of overhead contact wires caused by pantograph contact forces of Korea Tilting Train eXpress (TTX) and Korea Train eXpress (KTX). The image measurement system was implemented utilizing a high-speed CMOS (Complementary Metal Oxide Semiconductor) camera and gigabit ethernet LAN. Unlike previous systems, the uplift measurement system using high speed camera is installed on the side of the rail, making maintenance convenient. On-field verification of the uplift measurement system for overhead contact wire using high speed camera was conducted by measuring uplift of the TTX followed by operation speeds at the Honam conventional line and high-speed railway line. The proposed high-speed image measurement system to evaluate dynamic uplift of overhead contact wires shows promising on-field applications for high speed trains such as KTX and TTX.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.4
• /
• pp.753-758
• /
• 2009

Recently the high-end CMOS image sensors are developed, conforming to the SMIA CCP2 specification, which is a high-speed low-power serial interface based on LVDS technology. But this kind of technology trend makes the existing equipments are no longer useful, although their capability is still good enough to handle the recent image sensors if there was no interfacing problem. In this paper, we propose and realize a data protocol conversion system that translates the SMIA CCP2 serial signals into the existing 10-bit parallel signals. The proposed system is composed of a de-serializer and a FPCA chip, and thus can be constructed on a small PCB which enables easy integration between the existing equipments and the new high-end image sensors. Besides, the maximum transfer rate by the SMIA specification is also achieved on the implemented system. So it is expected that the implemented system can be used as a general-purpose protocol converter in a variety of sensor-related application fields.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.5
• /
• pp.919-926
• /
• 2023

In this paper, we implemented the surveillance camera system capable of day and night shooting. To this end, it is designed to capture clear images even at night using a CMOS image sensor as well as an IR-LED. In addition, a relatively simple motion detection algorithm was proposed through color model separation. Motions can be detected by extracting only the H channel from the color model, dividing the image into blocks, and then applying the block matching method using the average color value between consecutive frames. When motions are detected during filming, an alarm sounds automatically and a day and night motion detection system is implemented that can capture and save the event screen to a PC.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.06a
• /
• pp.819-822
• /
• 2007

In this paper, we propose an object-tracking of mobile robots using CHT(Circular Hough transform) algorithm. The proposed method extracts the region of moving objects using 1-D projection algorithm, and detects circular objects using CHT. In order to verify the effectiveness of the proposed tracking method, we perform experiments of ball shape object-tracking using mobile robot based on ARM processor with CMOS camera.

• Proceedings of the IEEK Conference
• /
• 2003.07b
• /
• pp.847-850
• /
• 2003

An Eye Ball Sensor (EBS) is a system that locates the point where the user gazes on. The conventional EBS using a CCD camera needs many peripherals, software computation causing high cost and power consumption. This paper proposes a compact EBS using smart CMOS Image Sensor (CIS) pixels. The proposed single chip EBS does not need any peripheral and operates at higher speed and lower cost than the conventional EBS. The test chip was designed and fabricated for 32$\times$32 smart CIS pixel array with a 0.35 um CMOS process occupying 5.3$\textrm{mm}^2$ silicon area.