• Korean Journal of Construction Engineering and Management
• /
• v.7 no.1 s.29
• /
• pp.119-127
• /
• 2006

On December, 1996, the Ministry of Construction and Transportation published Construction Management Service in Construction Industry Basic Act. CM service has been adopted in Korean construction market for ten years by now, however there was no significant change in the construction industry from adoption of CM service. The CM service results aggregated by PCM, from 1997 to 2004, show that CM service adopted projects were 324 in total and the total contract amount was 260million US dollars. These results tell us that adoption of CM service in Korean construction industry is not successful. The research is to survey the factors and the limitations affecting on poor adoption of CM service and to propose the improving strategies on that matter. Therefore, this paper analyzes former papers, laws and regulations on CM and CM service results from PCM as well. From the analysis, we found conflicts in between the laws such as different rules on same matter or missing significant policies in their provisions. Also, problems of industrial organization was found such that the public sector seldom adopts CM service due to their embeded CM function.

• Journal of KIISE:Information Networking
• /
• v.31 no.5
• /
• pp.469-481
• /
• 2004

Previous works for the AF(Assured Forwarding) service in the Diffserv network have no sufficient consideration on the fairness of bandwidth share based on RTTs, the target rates, and the impact of UDP against TCP. In this paper, in order to solve these problems, we propose a FDSA(Fair Differentiated Service Architecture) composed of TRA3CM(Target rate and RTT Aware 3 Color Marking) and TRBD(Target Rate Based Dropping) mechanisms. The TRA3CM and TRBD mechanisms provide three color marking and fair transmission rates among aggregate flows by considering RTT, target rate, and UDP flows simultaneously. In the results of comparing the performance among existing mechanisms and the TRA3CM-TRBD, the TRA3CM-TRBD mechanism was able to mitigate the RTT and UDP effect better than the former. The TRA3CM-TRBD is shown to provide good performance for transmission rates proportional to various target rates.

• Journal of the Korean Dietetic Association
• /
• v.4 no.2
• /
• pp.113-122
• /
• 1998

To investigate the children's food habit, one thousand of children from eleven elementary school food service were randomly selected in Taejon. The survey was conducted by questionnaires and data were analyzed by SAS program. The results are summarized as follows. 1.The average height and weight for the 3th grader are 132.0cm and 29.4kg for boys. 131.2cm and 27.9kg for girls. In the case of the 6th grader the average height and weight are 147.1cm, 41.1kg for male, 148.6cm, 41.0kg for female, repectively. Those values are less than national averages. 2. The third grader eats breakfast more regularly than the sixth grader(p<0.001) and 51.5% of the children answer that they take foods for their health. The third grader has better eating habits that the six grader. This survey shows that the sixth grader eat more cereal, milk and vegetable and the third grader has less fruits than the sixth grader. 49.3% of the total children likes eating food at home, 36.6% eating outside and 14.1% school meal service. 25.8% of the children reply that they do not eat now foods during school meal service. 82.5% of the total children are willing to eat foods served from school meal service if a teacher explains about the information of foods.

• Journal of KIISE:Information Networking
• /
• v.30 no.6
• /
• pp.764-775
• /
• 2003

Previous works for the assured service in the Diffserv network have no sufficient consideration on the fairness of bandwidth share based on RTTs and the target rates of TCP flows. In this paper, in order to solve these problems, we propose a TRA3CM(Target rate and RTT Aware 3 Color Marking) mechanism. The TRA3CM mechanism provides three color marking and fair transmission rates among aggregate flows by considering RTT and target rate simultaneously. In case of higher target rate than bottleneck bandwidth, the TRA3CM mechanism is able to mitigate the RTT effect and provides fair transmission rates. In the results of comparing the performance among existing mechanisms and the TRA3CM, the TRA3CM mechanism was able to mitigate the RTT effect better than the former. The TRA3CM is shown to provide good performance for transmission rates proportional to various target rates.

• Journal of the Korea Institute of Building Construction
• /
• v.11 no.2
• /
• pp.108-115
• /
• 2011

This study investigates the construction management selection methods for fair competition within the construction management market by analyzing the current status of domestic construction management, the 2010 publication on the status of construction management, and the construction management evaluation criteria. Also, the 2009 publication of top CM service establishments, the average proportion of tender for 120 CM services from 2002 to 2010, and six assessment results which are open to the parties directly involved were statistically analyzed to review the adequacy of the evaluation criteria. This analysis shows that the evaluation criteria for the CM service impedes the development of the construction management industry and companies, since the criteria are decided by the service payment, and the technical skills assessed by technical proposals have no ties with contract prices. Therefore, this study proposes an improvement of the selection methods in accordance with the project characteristics and the technical requirements. However, more research is still needed to derive a detailed classification method of the technical requirement, the owner's evaluation criteria selection, and the preparation of an institutional foundation for the construction manager's post-evaluation.

• Journal of Positioning, Navigation, and Timing
• /
• v.11 no.4
• /
• pp.269-277
• /
• 2022

In this paper, we overview the system development status of the national maritime precise point positioning-real-time kinematic (PPP-RTK) service in Korea, also known as the Precise POsitioning and INTegrity monitoring (POINT) system. The development of the POINT service began in 2020, and the open service is scheduled to start in 2025. The architecture of the POINT system is composed of three provider-side facilities-a reference station, monitoring station, and central control station-and one user-side receiver platform. Here, we propose the detailed functionality of each component considering unidirectional broadcasting of augmentation data. To meet the centimeter-level user positioning accuracy in maritime coverage, new reference stations were installed. Each reference station operates with a dual receiver and dual antenna to reduce the risk of malfunctioning, which can deteriorate the availability of the POINT service. The initial experimental results of a testbed from corrections generated from the testbed network, including newly installed reference stations, are presented. The results show that the horizontal and vertical accuracies satisfy 2.63 cm and 5.77 cm, respectively. For the purpose of (near) real-time broadcasting of POINT correction data, we designed a correction message format including satellite orbit, satellite clock, satellite signal bias, ionospheric delay, tropospheric delay, and coordinate transformation parameters. The (near) real-time experimental setup utilizing (near) real-time processing of testbed network data and the designed message format are proposed for future testing and verification of the system.

• Korean Journal of Construction Engineering and Management
• /
• v.22 no.2
• /
• pp.97-105
• /
• 2021

The CM at Risk project, which started with the aim of strengthening the global competitiveness of the domestic construction industry through innovation of ordering system, is being implemented in the form of pilot projects in the public sector. However, it seems that it is necessary to enact related laws and regulations to move to the formal ordering system, and the performance analysis of the project is still insufficient. In this paper, the effectiveness and reliability of the project were verified through the performance analysis of the Pre-Construction Service of the four pilot projects currently being implemented. The results of the study were analyzed in five areas including Team Building, Design Book, Construction Period, VE, and BIM. Through the interview survey, the problems were confirmed and improvement plans were presented. The results of this study are expected to be used as basic data for the legalization of ordering system to be implemented in the future.

• Journal of Astronomy and Space Sciences
• /
• v.29 no.3
• /
• pp.275-285
• /
• 2012

In this study, we present preliminary results of precise orbit determination (POD) using satellite laser ranging (SLR) observations for International Laser Ranging Service (ILRS) Associate Analysis Center (AAC). Using SLR normal point observations of LAGEOS-1, LAGEOS-2, ETALON-1, and ETALON-2, the NASA/GSFC GEODYN II software are utilized for POD. Weekly-based orbit determination strategy is applied to process SLR observations and the post-fit residuals check, and external orbit comparison are performed for orbit accuracy assessment. The root mean square (RMS) value of differences between observations and computations after final iteration of estimation process is used for post-fit residuals check. The result of ILRS consolidated prediction format (CPF) is used for external orbit comparison. Additionally, we performed the precision analysis of each ILRS station by post-fit residuals. The post-fit residuals results show that the precisions of the orbits of LAGEOS-1 and LAGEOS-2 are 0.9 and 1.3 cm, and those of ETALON-1 and ETALON-2 are 2.5 and 1.9 cm, respectively. The orbit assessment results by ILRS CPF show that the radial accuracies of LAGEOS-1 and LAGEOS-2 are 4.0 cm and 5.3 cm, and the radial accuracies of ETALON-1 and ETALON-2 are 30.7 cm and 7.2 cm. These results of station precision analysis confirm that the result of this study is reasonable to have implications as preliminary results for administrating ILRS AAC.

• Journal of KIISE:Information Networking
• /
• v.32 no.6
• /
• pp.732-744
• /
• 2005

Previous works for the AE(Assured Forwarding) service in the Diffserv network have no sufficient consideration on the fairness of bandwidth share based on the target rate and the effect or RTT and UDP. Also Previous works act like Best-effort service in the UPN(under-Provisioned Network) condition. In this paper, in order to solve these problems, we propose the PFDSA(Proportionally Fair Differentiated Service Architecture) composed of tmTRA3CM(tcp-microflow based Target rate and an Aware Three color Marking), um3CM(udp-microflow based Three color Marker), TRBD(Target Rate Based Dropper), and target rate adjusting function. In the results of comparing the performance among existing mechanisms and the PFDSA, the PFDSA was able to mitigate the RTT and UDP effect better than the former. The PFDSA was shown to provide good performance for transmission rates proportional to various target rates in the UPN condition.

• The Korean Journal of Emergency Medical Services
• /
• v.12 no.3
• /
• pp.27-41
• /
• 2008

Purpose : The purpose of this study was to supply basic data for the impact on the accuracy of basic CPR according to position and foot-board height of basic CPR provider. Methods : Study design was within - group design. Subjects were 25 EMT-P Students in K city. Interventions was basic CPR performed on a resuscitation manikin placed on a hospital bed, kneeling on the bed adjacent to the manikin. Data was analyzed using descriptive statistics and Friedman test. Results : In case of the basic CPR performed on a resuscitation manikin placed on a hospital bed, ventilation accuracy was the highest in less than 160 cm height, foot-board height : $34.2{\pm}1.48cm$, 91.4% and in 161-165 cm height, foot-board height : $26.0{\pm}2.14cm$, 88.4% and in 171-175 cm height, foot-board height : $23.0{\pm}1.41cm$, 91.3% and in the above 176 cm, kneeling on the bed, 95%. Chest compression accuracy was the highest in less than 160 cm height, foot-board height : $30.2{\pm}1.48cm$, 95.6% and in 161-165 cm height, kneeling on the bed, 97.6% and in 171-175 cm height, kneeling on the bed, 98.5% and in the above 176 cm, kneeling on the bed, 98.7% and foot-board height : $20.5{\pm}1.91cm$, 98.7%. Chest compression error was due to too weak : 2.0-35.4 times. There were ststistically significant differences in 191-195 cm group according to chest compression mean depths($x^2=10.824$, p = .013) and chest compression error (p = .040). Conclusion : In contrast to current guidelines, the position and foot-board height of basic CPR provider are very important to the accuracy of the basic CPR. Furthermore, we recommend that a using real time audiovisual feedaback system significantly improve the quality of chest compression and ventilation during resuscitation.