• Progress in Medical Physics
• /
• v.7 no.1
• /
• pp.9-17
• /
• 1996

The response function of ionization chambers are measured in the narrow radiation field Nominal photon energies are 4MV, 6MV and 15MV. the Radii of the chambers are 0.5cm～3.05cm and the field size is 0.2$\times$20$\textrm{cm}^2$. The measurements are taken in the water phantom at 10cm depth. The beam kernel (radiation distribution profile) for narrow radiation field in the phantom are obtained from Monte Carlo simulation (EGS4, Electron Gamma Shower 4). The beam kernel components in the measured chamber response function are deconvolved in order to get the ideal chamber response function of the $\delta$-shaped function radiation field. The chamber response functions have energy dependent tendency before deconvolution, while they show energy invariant properties, after the components of beam kernels are removed by deconvolution method.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.24 no.1
• /
• pp.105-115
• /
• 2000

This study was intended to find body pattern of middle aged women and make new experimental basic pattern for upper-half of the body for them. This experimental pattern on the idea of body pattern analysis was prepared. For experimental pattern, the prototype basic model was chosen with the best qualified D model from the four meaningful existing patterns. After several steps of correction experimental pattern was made. Comparing with basic D model, the new experimental pattern composed of additional bust girth by 1cm, wider back waist by 0.5cm than front waist and additional armhole by 0.5cm keeping the same size for back and front widths. Making a shoulder line up by 3cm the armhole became deeper accordingly and the room for girth has been transferred to length. Front neck girth became deeper downward but back neck girth risen a little bit. Side line of the bodice formed with inward slope taking from the waist line by 2cm. Instead of dart, modified side line slope was more practical by its function and appearance. Abdominal girth which is lower than waist girth by 8.5cm kept in same size with bust girth. Then abdominal girth became more comfortable. New experimental pattern with changes has been examined in function and appearance. In conclusion, the new experimental basic pattern for the middle-aged women has been proved more practical for both in bodice and sleeve than other existing ones in terms of function and appearance.

• The Journal of the Korea Contents Association
• /
• v.15 no.10
• /
• pp.336-345
• /
• 2015

This study conducted the following experiment to examine change of biophysical and physical fitness function on combined exercise program in 20' female university students with obesity according to heights of insole. Obesity related biophysical function was measured by basal metabolism and percent body fat(% Fat) and health related physical fitness was measured by isokinetic strength of quadriceps femoris muscle, muscular endurance, flexibility and power on comparative analysis of pre, post exercise and each groups(0cm, 5cm, 9cm) in 36 female university students with obesity subject according to heights of insole. These result lead us to the conclusion that each group were statistically improved at isokinetic muscular strength of quadriceps femoris muscle and basal metabolism, but 5cm group compared with 0cm and 9cm group was more significant improvement. Consequently, combination exercise applying appropriate heights of insole would be lead to positive increment of muscular strength and basal metabolism.

• Journal of the Korean Mathematical Society
• /
• v.42 no.1
• /
• pp.85-99
• /
• 2005

In this paper, we investigate some properties of the entire function of the hyper order less than ${\frac}{1}{2}$ sharing one value CM with its k-th derivative.

• Journal of the Korean Society of Physical Medicine
• /
• v.16 no.3
• /
• pp.45-53
• /
• 2021

PURPOSE: The current case study focuses on identifying the effects of the independent application of TECAR therapy and physiotherapeutic intervention using TECAR therapy on pain self-awareness and hip joint function in patients with hip impingement syndrome caused by nonstructural changes. Subjects: The research subject was a 34-year-old woman struggling with acute pain in her left hip, difficulty in actively moving the hip, and a problem in its overall function. METHODS: The subject's pain awareness and hip joint function were measured using a Visual Analog Scale (VAS) and passive range of motion (PROM), respectively. The experimental intervention was carried out in 24 sessions of 16 minutes each, three times a week, for eight weeks. RESULTS: The VAS score decreased to 0 cm on the post-test from 4.3 cm, 6.5 cm, and 7.2 cm in the pre-test at the rest, standing, and gait positions, respectively. The index of PROM measured hip joint flexion, extension, abduction, adduction, internal rotation, external rotation, and passive straight leg raise. The values increased to 122.5°, 24.5°, 78°, 33°, 65°, 42°, and 96.5° in the post-test compared to 88.5°, 15°, 39°, 21.5°, 23°, 22°, and 46.5° in the pre-test, respectively. CONCLUSION: TECAR therapy and physiotherapeutic intervention using TECAR can help reduce pain and enhance the hip joint function in patients with hip impingement syndrome.

• Progress in Medical Physics
• /
• v.22 no.4
• /
• pp.190-197
• /
• 2011

Currently, the dose distribution calculation used by commercial treatment planning systems (TPSs) for high-dose rate (HDR) brachytherapy is derived from point and line source approximation method recommended by AAPM Task Group 43 (TG-43). However, the study of Monte Carlo (MC) simulation is required in order to assess the accuracy of dose calculation around three-dimensional Ir-192 source. In this study, geometry factor was calculated using segmented sources integration method by dividing microSelectron HDR Ir-192 source into smaller parts. The Monte Carlo code (MCNPX 2.5.0) was used to calculate the dose rate $\dot{D}(r,\theta)$ at a point ($r,\theta$) away from a HDR Ir-192 source in spherical water phantom with 30 cm diameter. Finally, anisotropy function and radial dose function were calculated from obtained results. The obtained geometry factor was compared with that calculated from line source approximation. Similarly, obtained anisotropy function and radial dose function were compared with those derived from MCPT results by Williamson. The geometry factor calculated from segmented sources integration method and line source approximation was within 0.2% for $r{\geq}0.5$ cm and 1.33% for r=0.1 cm, respectively. The relative-root mean square error (R-RMSE) of anisotropy function obtained by this study and Williamson was 2.33% for r=0.25 cm and within 1% for r>0.5 cm, respectively. The R-RMSE of radial dose function was 0.46% at radial distance from 0.1 to 14.0 cm. The geometry factor acquired from segmented sources integration method and line source approximation was in good agreement for $r{\geq}0.1$ cm. However, application of segmented sources integration method seems to be valid, since this method using three-dimensional Ir-192 source provides more realistic geometry factor. The anisotropy function and radial dose function estimated from MCNPX in this study and MCPT by Williamson are in good agreement within uncertainty of Monte Carlo codes except at radial distance of r=0.25 cm. It is expected that Monte Carlo code used in this study could be applied to other sources utilized for brachytherapy.

• Journal of Fashion Business
• /
• v.12 no.1
• /
• pp.93-108
• /
• 2008

This study held physical measurement for male subjects in their 20s living in Ningbo City, Zhejiang Province in China, showing the biggest market in men's clothes. Their representative lower body types with average shapes and sizes were chosen so as to develop men's slacks patterns with better dimension fitness. The following are the results of the analysis: 1. Slacks patterns were made based on the mean measurement values of 5 people, who were closest to the representative body types, from the index*absolute group of 47 people. The dimensions of application for slacks pattern-making were 77cm(omphalion waist circumference), 91cm(hip circumference), and 103cm(slacks length). 2. For the comparison of high-fitness and more-room pattern dimensions, 5 styles of slacks were made: Korean, Chinese, British, Japanese, and industrial. In the dressing fitness tests, industrial patterns had excellent appearance and Japanese ones had the best function. 3. Based on the analysis results of slacks pattern comparison, the target slacks were experimentally made and received superior evaluation points to the compared slacks patterns in two times of evaluation for appearance and function. 4. The final slacks pattern in this research had the following dimensions: front waist circumference: W(1-2cm with room included)/4-1cm, back waist circumference: W/4+1cm, front hip circumference: H(9$\sim$10cm with room included)/4-1cm, back hip circumference: H/4+1cm, crotch length: H/4-1.5cm, hip length: crotch length-H/12, front crotch extension: H/16-1.5cm, back crotch extension: H/8+3cm, knee line: 33cm below crotch line, front tuck amount: 4cm, back dart amount: 2.5cm(center) and 1.5cm(side), and back dart length: 10cm (center) and 6cm(side).

• Interaction and multiscale mechanics
• /
• v.5 no.2
• /
• pp.131-144
• /
• 2012

We study a radial basis function collocation method (RBFCM) to discretize a coupled nonlinear Schr$\ddot{o}$dinger equation (CNLSE) that governs a two dimensional rotating Bose-Einstein condensate (BEC) with an angular momentum rotation term. We exploit a RBFCM-continuation method (RBFCM-CM) to trace the solution curve of the CNLSE. We compare the performance of the RBFCM-CM with the FEM-CM. We observe that the RBFCM-CM is very robust in a coarse grid for resolving the ground state solution with many vortices when the angular momentum rotation is close to the limit. Numerical results demonstrate the efficiency and accuracy of the RBFCM-CM for computing the superfluid density of the ground level of the BEC.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.388-393
• /
• 2003

Since the Construction Management(CM) was introduced into the Korea construction industry, the efforts for acceleration of CM adaption have been continued. The fact that an owner organization has the essential key to successful application of CM delivery method is true, but there has been no study on owner's organization. An owner should decide their organization type and measure their current needs of each CM business functions for successful application of CM. After the needs of CM business functions are measured, the owner should reinforce their required business functions through strengthening their in-house capability or outsourcing. Thus, this paper defines four kinds of owner organization type and suggest the form for evaluation of owner's CM ability and analyze about needs of each type's CM ability through making up question.

• Kyungpook Mathematical Journal
• /
• v.61 no.4
• /
• pp.745-763
• /
• 2021

For a value s ∈ ℂ∪ {∞}, two meromorphic functions f and g are said to share the value s, CM, (or IM), provided that f(z)-s and g(z)-s have the same set of zeros, counting multiplicities, (respectively, ignoring multiplicities). We say that a meromorphic function f shares s ∈ Ŝ partially with a meromorphic function g if E(s, f) ⊆ E(s, g). It is easy to see that "partially shared values CM" are more general than "shared values CM". With the help of partially shared values, in this paper, we prove some uniqueness results between a non-constant meromorphic function and its generalized differences or shifts. We exhibit some examples to show that the result of Charak et al. [8] is not true for k = 2 or k = 3. We find some gaps in proof of the result of Lin et al. [24]. We not only correct these resuts, but also generalize them in a more convenient way. We give a number of examples to validate certain claims of the main results of this paper and also to show that some of conditions are sharp. Finally, we pose some open questions for further investigation.