• Journal of the Korean earth science society
• /
• v.37 no.1
• /
• pp.11-20
• /
• 2016

Diatoms were studied from the trench sediments around Bangudae petroglyphs in order to better understand the depositional environment before and after the construction of Sayeon dam in Ulsan. There were no diatoms produced from the sediments before the dam construction while the diatoms were produced from the sediments (depth of trench 228 cm) after the construction of the dam. Seventy-five species of diatoms of 27 genera were identified in the trench sediments. The number of diatom valves per gram of dry sediment ranged from $0.2-5.8{\times}10^5g^{-1}$. Four diatom assemblage zones were identified according to the frequency of critical taxa as follows: assemblage zone I, from 228 to 150 cm; assemblage zone II, from 150 to 122 cm; assemblage zone III, from 122 to 62 cm; and assemblage zone IV, from 62 to 0 cm. In addition, based on the environmental indicator species, an analysis was carried out to measure eutrophication, acidity and $Cl^-$ value. Results of the eutrophication and $Cl^-$ values were as follows. Based on the lower 74 cm horizons, the degree of eutrophication middle-high to $Cl^-$ values were lower, upper horizons appeared to eutrophication in the low, and $Cl^-$ values were high. Acidification from low horizons of 122 cm showed a neutral-alkaline degree whereas it exhibited acid in the upper part. In particular, regarding nutrients (TP and TN), the index taxa showed a higher TP value at 175 cm while higher TN value at 62 cm.

• Journal of the Korean Society of Radiology
• /
• v.5 no.6
• /
• pp.415-420
• /
• 2011

The purpose of this study is to know the exposure dose nearby table on the general radiography(skull AP, chest PA, abdomen AP, lumbar lateral, hip joint, knee joint) and to find the reducing it. We measured beside the 45cm and 75cm table center, and 70cm, 80cm, 130cm, 150cm height from the bottom. That were measured highly from the radiography of lumbar lateral, abdomen AP and hip joint as followed $66.21{\mu}Sv$, $34.22{\mu}Sv$, and $32.35{\mu}Sv$ at the 80cm height beside 45cm from the center of table. Measured doses were reduced in order of chest PA, abdomen, hipjoint, skull, knee joint projection. It appears exposure dose of nearby radiographic table was extremely low amount compared with limit of dose(1mSv). If it protected by Pb apron, exposure dose of assisting person will not be exceed a limit of dose. Conclusively, Wearing apron is very important to avoid radiation from the general radiography.

• Journal of the Korean Vacuum Society
• /
• v.6 no.2
• /
• pp.122-128
• /
• 1997

In this study, the PVDF organic thin films were fabricated by thermal evaporation deposition which is one of the dry-processing methods. The distance from heat source to substrate was 5 cm. The substrate temperature was maintained at $30 ^{\circ}C$ during deposition. The working pressure was about $2.0\times10^{-5}$Torr and the temperature of heat source was increased at the rate of 6 to $8^{\circ}C$/min. At $270^{\circ}C$, the shutter was opened and the deposition of PVDF has stared. As the electrical field intensity increased, $\alpha$ peaks such $530\textrm{cm}^{-1},795\textrm{cm}^{-1},1182\textrm{cm}^{-1}$ decreased, and $\beta$ peaks such as $510\textrm{cm}^{-1},1273\textrm{cm}^{-1}$ increased. The intensity of $530\textrm{cm}^{-1}$ peak was stronger than that of $510\textrm{cm}^{-1}$ peak velow the 71.4 kV/cm, intensity of electrical field. This result showed the characteristic of film mainly due to $\alpha$-mode. According to these results, the molecular structure of PVDF thin film is transformed from $\alpha$-mode with TGT or TG'T to $\beta$-mode with planar zigzag structure TT, as increasing of intensity of electrical field.

• Journal of Korean Library and Information Science Society
• /
• v.35 no.3
• /
• pp.79-94
• /
• 2004

This research studied the preservation treatment of the papered literature the national treasure 745-9 $\ulcorner$Keumganggyung-samgahae$\lrcorner$, discovered in 1995 from the Four Devas of Borimsa Buddhist Temple at Jangheung County, in the viewpoint of the bibliography. The overall features of the $\ulcorner$Keumganggyung-samgahae$\lrcorner$ were of 25.3cm width, 38.9cm height 1.5cm depth, 58 pages and of high-fine yellow-brown colored reef paper. The book was ruined physically in the shape and color. The covers of the book were deeply stained by the permeated rain and some internal pages were changing into brown color by corrosion. The treatment policies were； maintaining the status quo and capable repeated treatment. And the preservation treatment was done in the sequences of 1) 1st cleaning process, 2) repairing and correcting, 3) 2nd cleaning and preservation 4) cutting, binding the book and making the envelope and wood box. The post-preservation features of $\ulcorner$Keumganggyung-samgahae$\lrcorner$ were； total 64 pages and the size being 25.8 cm width 39.4cm of lenght, and 1.9cm of depth.

• The Journal of the Korea Contents Association
• /
• v.8 no.11
• /
• pp.182-188
• /
• 2008

The MLC(multi leaf collimator) in charge of important role in radiation therapy field recently have been exchanging from shielding block into it rapidly, owing to being convenient. However, MLC can be occurred the leakage dose of inter_leaves and the error of algorithm in imput and output from digital signal. We compared the difference of imput method to MLC made by Varian Cop. with the error and effective field induced by MLC shaper and film scanner based on XimaVision value as using MLC layer of various shapes. According to comparing standard value with them to basic MLC layer (test1-5), MLC shaper was $0{\sim}0.29cm$, $0.23{\sim}3.59cm^2$ and film scanner was $0{\sim}0.78cm$, $0.24{\sim}3.89cm^2$. At the MLC layer to be applied in clinic, MLC shaper was $0{\sim}0.54cm$, $0.04{\sim}1.68cm^2$ and film scanner was $0{\sim}0.78cm$, $0.24{\sim}3.89cm^2$. The more distance and field from axis of central line increase, the more bigger the error value increases. There is a few mm error from standard point at the process which imput various information to apply MLC in clinic. and effective field did not have variation of monitor unit and dose owing to being a few cm2 error against real field. But there are some problem to shield critical organs because some part of target volume induced by the movement of organs can be not included, therefore we have to pay attention on the process to imput MLC layer

• Korean Journal of Applied Biomechanics
• /
• v.17 no.4
• /
• pp.83-88
• /
• 2007

The purpose of this study was to investigate the ball velocity changes depending on the different linear momentum of putter head. For this study, two different moving conditions(25cm free fall and 35cm free fall) of putter head were set. And two different types of ground conditions were used which are artificial grass green($180cm{\times}600cm{\times}1cm$) and glass green($40cm{\times}130cm{\times}1cm$). Movements of putter head and ball were recorded with 2 HD video cameras(60 Hz, 1/500s shutter speed). Small size control object($18.5cm{\times}18.5cm{\times}78.5cm$) was used in this study. Ball and putter head velocities were calculated by the First Central Difference Method(Hamill & Knutzen, 1995). Linear momentum of ball and putter head were calculated with mass and its velocities. Before impact, the velocity of the putter head of 35cm free fall was about 30% greater than that of the putter head of 25cm free fall. Linear momentum of putter head of 35cm free fall was about 0.355-0.364kg m/s and 25cm free fall was 0.251 kg m/s. After impact, putter head lost its linear momentum about 14-19% and adjusting time of putter head after impact would be 0.1 second. After 0.1 second, putter moved the route same as before impact. Maximum ball velocities were appeared 0.08s-0.10s after impact no matter what the ground conditions are. Ball velocities struck by 35cm free fall were 30 % faster than 25cm free fall. Linear momentum of ball struck by putter head was greater than that of expected amount because the moving ball has translational energy and rotational energy. Future study must treat three things. One is ball must struck by the different putters with different materials. Another is two-piece ball and three-piece ball should be used for the same condition studies. The other is height of center of rotation of club should be changed. In this study, the height of center of rotation of club head is 71cm from the ground. But recently many golfers used the long putter. Therefore next study should apply the different height of center of rotation of club head.

• Korean Journal of Microbiology
• /
• v.35 no.1
• /
• pp.78-81
• /
• 1999

The change of soil microbial populations was studied at the burnt areas of Mt. Jirisan in Hddong-Gun, Kyungsangnam-Do, where the fire had occurred on Oct. 21 in 1997. On the first day of the fireextinguished, the microbial density (CFUIg dry soil) was investigated at the surface, 5 cm, 10 cm, 20cm, and 30 cm depth of soils. Bacteria at the surface and 5cm depth of burnt sites were estimatedwith the low density level of $10^2$ CFW/g soil comparing to the $10^6$ CFUIg soil of the neighboring unburntsites. Actinomycetes of burnt sites were completely disappeared at the surface, and were estimatedwith the low density level of $10^3$ CFUig soil at thc 5 cm depth comparing to the 10"CFUigsoil at the depth of unburnt sites. Fungi wcrc not isolated at the surface and 5 cm depth at all.However, the rarest lire was not found to decrease the microbial populalions at the lower depths than10 cm. In addilion, the recovery or soil microbial populations following the fire was bimonthly investigatedat the surrace and 5 cm depth. Most of microbial densities at the burnt sites were greatlyincreased two months after the fire, being enough to he compared with the neighboring unburnt sites.However, actinomycetes only at the surface of burnt sites still were estimated the low density level of$10^4$ CFUig soil 4 months after the fire comparing to the $10^6$CFIg soil of unburnt sites.TEX>CFIg soil of unburnt sites.

• Korean Journal of Plant Resources
• /
• v.17 no.2
• /
• pp.183-188
• /
• 2004

This study was conducted to investigate the effects on the growth and yield by the different seeding methods and cultivating root weight in Atractylodes macrocephata Koidz. Seeding distances were different such as 5${\times}$5 cm, 5${\times}$10 cm, 10${\times}$10 cm, 10${\times}$15 cm by the hand seeder and 15 cm seeding in drill. Emergence date, plant height were not significantly changed with seeding space, but the number of leaf, fresh weight of above-ground part and fresh weight of root were increased in the sparse seeding compared with the dense seeding. The highest fresh root yield was 1,012 kg/10 a at the 5${\times}$5 cm. Roots yield was increased in the sparse seeding compared with the dense seeding, but the highest number of roots above 16 g yield was observed at the 10${\times}$10 cm seeding distance. Emergence date was faster 1∼3 day root weight above 6 g than that root weight 5 g. The plant height, number of stem and fresh weight of above-ground part were more increased as the root weight was heavier. The growth of underground part were more increased as the root weight was heavier, yield was increased about 27％ to 112％ compared with root weight above 6 g than that 134.6 kg/10 a with root 5 g.

• Korean Journal of Construction Engineering and Management
• /
• v.14 no.2
• /
• pp.87-95
• /
• 2013

The number of construction management firms has been increased as construction management delivery system has been active in Korean construction market. the capability of leading construction management professional, who is responsible for managing project administration, is important for commissioning construction management contracts. The quality of project proposal and the capability of leading construction management professional, which are assessed by the board of contract awarding committee, are the major contributors for commissioning the public construction management projects administered by the Korean public procurement service for contracting. Therefore, employing a very competent leading construction management professional is the critical strategy for awarding contract to the construction management firms' part. That is why the firms should secure a fixed number of leading construction management professional in a waiting list to proceed the contract commissioning process for expectant candidate projects, even if there is no project assignable to the leading construction management professionals. However, a measure that makes effectively use of the leading construction management professional in a waiting list has not been systematically implemented in the firms. In turn, the firm suffers considerable loss in a project personnel supply and demand plan. Expert opinions were obtained by the survey questionaries administered to top management of the construction management firms which are engaged in the construction management contracts for commissioning the public construction management projects administered by the Korean public procurement service either as principal or co-principal deliverer. This paper presents the findings obtained by investigating the actual employment state of the leading construction management professional in the waiting list and by analyzing the issues involved in mobilizing and demobilizing them. It contributes to implement a practical guide for searching effective solutions to the issues.

• Journal of Life Science
• /
• v.23 no.12
• /
• pp.1516-1524
• /
• 2013

To find a novel skin whitening agent, the effect of cordycepin-enriched Cordyceps militaris (CM${\alpha}$) extract fermented by fungi on anti-melanogenesis in B16F0 mouse melanoma cells was investigated. Fermented CM${\alpha}$ was prepared with fungi, including Monascus purpureus (Mp), Aspergillus oryzae (Ao), Aspergillus kawachii (Ak), and Rhizopus oryzae (Ro), respectively. When the content of the phenolics and the flavonoids and the activities of the antioxidant and the mushroom tyrosinase inhibition were measured in the CM fermented by Ak (AkF-CM), the highest content of the phenolics was 46 mg/g dry weight and the highest content of the flavonoids was 0.93 mg/g; the highest activity of the DPPH radical scavenging was 62.74% and the highest activity of the mushroom tyrosinase inhibition was 79.97% CM${\alpha}$CM${\alpha}$. From this result, AkF-CM${\alpha}$ exhibited the highest mushroom tyrosinase inhibitory activity and so it was used in subsequent anti-melanogenesis. B16F0 melanoma cells were treated with 1-10 mg/ml concentrations of AkF-CM${\alpha}$ and 200 ${\mu}M$ arbutin as the positive control. The melanin content and cell viability of the melanoma cells by arbutin treatment decreased to 43% and 92% of the control, respectively. AkF-CM${\alpha}$ treatment at 1, 3, and 5 mg/ml concentrations decreased the extracellular melanin release induced by IBMX treatment by 35%, 45%, and 53%, respectively. AkF-CM${\alpha}$ showed inhibitory activity against both intracellular tyrosinase in melanoma cells and mushroom tyrosinase. AkF-CM${\alpha}$ reduced the protein level of tyrosinase in the IBMX-stimulated cells. These results indicate that AkF-CM${\alpha}$ suppressed the activity and protein content of cellular tyrosinase and decreased the total melanin content in cultured B16F0 melanoma cells.