• Particle and aerosol research
• /
• v.15 no.2
• /
• pp.79-90
• /
• 2019

It is important to control fine particles in children care centers, elementary schools, elderly care facilities and so on where vulnerable children and the aged stay during most of their time. This study has investigated $PM_{2.5}$ and $PM_{10}$ concentrations in two classrooms equipped with an air cleaner and two air cleaners, respectively and they were compared to those in a classroom without an air cleaner as well as those outdoors. Eight air cleaners which have various clean air delivery rates (CADRs) between 9.9 and $21.3m^3/min$ were tested in classrooms in two elementary schools in Seoul. Average $PM_{2.5}$ and $PM_{10}$ were $7.3{\pm}0.7$ and $45.5{\pm}4.1{\mu}g/m^3$ in classrooms equipped with an air cleaner and $4.2{\pm}0.6$ and $24.6{\pm}2.5{\mu}g/m^3$ in classrooms with two air cleaners, whereas they were $22.1{\pm}2.6$ and $109.1{\pm}9.6{\mu}g/m^3$ in classrooms without an air cleaner and $36.9{\pm}5.1$ and $74.1{\pm}10.6{\mu}g/m^3$ outdoors, respectively. $PM_{2.5}$ in classrooms could be reduced effectively by using an air cleaner or two air cleaners, because $PM_{2.5}$ was mainly infiltrated from outdoors, however $PM_{10}$ could not because $PM_{10}$ was mainly caused indoors by students' activities. Air cleaners were more effective for removal of $PM_{2.5}$ and $PM_{10}$ in classrooms with a high airtightness than those in classrooms with a relatively low one. Average $CO_2$ in classrooms was about 1500 to 2000 ppm for class hours dependent on the student number per a classroom, which was about 1.5 to 2 times higher than the standard, regardless of the use of air cleaner.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.12 no.4
• /
• pp.336-342
• /
• 2019

With the entry of an aging society, the average life span of accreditation has been extended. Therefore, interest in the appearance of men and women in modern society has increased. It is the wrinkles of the face that can judge the most outwardly. People tend to have various kinds of treatments to have a clean, wrinkle-free and resilient healthy skin regardless of sex. There is a lot of practice of lifting procedures in one of the procedures. A suture using a melting thread is a method of lifting by squeezing it into the skin as a non-incision type centering on a region where the thread can be fixed in the skin by injecting it into the subcutaneous fat layer. To evaluate the lifting efficacy of Cog - type suture for the improvement of skin wrinkles, preclinical experiments were conducted. We developed a wrinkle evaluation program using Labview. Data from preclinical experiments were used at 8 weeks after suturing. The average wrinkle depth was 415.6 mm in the control group. At 8 weeks, the depth of wrinkles was deepened to 888.3mm due to the aging process of the control group. On the other hand, the depth of the wrinkles before surgery was 640.3 mm in the suture group. It was confirmed that the depth of wrinkles decreased to 566.5mm at 8th week after the suture operation.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.21 no.1
• /
• pp.177-188
• /
• 2019

The purpose of the optimization of the installation of supply/exhaust ports for tunnels with transverse ventilation system is to supply fresh air from outside to inside of tunnels uniformly and exhaust pollutant from tunnels properly for creating safe and clean environment for tunnel users. For this purpose, a ventilation port area optimization program was developed to obtain a uniform supply or exhaust air volume inside a great depth double deck tunnel with transverse ventilation system. In order to area optimize the developed port sizing program, the wind velocity was measured in the duct of the currently operated tunnel with semi-transverse ventilation. Also 3D cfd was performed on the same tunnel and cfd results were compared to the measured value. As a result, the error rate between the predicted value from the program and measured value was 6.72%, while the error rate between the predicted value from the program and 3D cfd analysis value was 4.86%. Both of comparison results show less than 10% of error rate. Thus It is expected that supply/exhaust port optimization design of transverse ventilation tunnel can be possible with using this large exhaust port area optimization program.

• Korean Journal of Ichthyology
• /
• v.31 no.1
• /
• pp.16-22
• /
• 2019

Investigations on the study of the distribution aspects and extinction threat evaluation of the Korean endemic species, Iksookimia pacifica were done from 2017 to 2018 in Korea. During the study period, the samples of I. pacifica were collected in 17 streams, 46 sites (from Baebongcheon Stream of Goseong-gun to Gunsuncheon Stream of Gangneung-si) among the noted 33 streams and 104 sampling sites investigated. The population size of I. pacifica was relatively large in streams such as Bukcheon, Baebongcheon, Hwasangcheon, Cheonjincheon, Ohhocheon Stream etc., but the population size was small in streams such as Sacheoncheon, Namcheon, Gangneung Namdaecheon Stream etc. The main habitat of I. pacifica was the downstream pool of clean water with slow velocity and sand bottoms, and their sensibility was estimated to be due to river work and water pollution. Comparing the previous records of the appearance of I. pacifica, they were first seen in Sampocheon Stream, but they did not appear in Jusucheon, Jeoncheon, Samcheok Osipcheon Stream. Given this evidence as noted for the 19.5% reduction in occupancy within 3 generations, in small appearance range ($1,343km^2$) and small occupancy area ($184km^2$), the number of locations were many (18) and the population was relatively large within the range of habitat. Therefore, I. pacifica is now considered a Near Threatened (NT) based on the IUCN Red List categories and criteria.

• Journal of the Microelectronics and Packaging Society
• /
• v.25 no.4
• /
• pp.123-128
• /
• 2018

Effect of activators in flux on the printability and wettability of a solder paste was evaluated in this study. The activators in this study were dicarboxylic acids, which were oxalic acid (n = 0), malonic acid (n = 1), succinic acid (n = 2), glutaric acid (n = 3), adipic acid (n = 4), and pimelic acid (n = 5). When the solder pastes were observed with a SMT scope, solder with glutaric acid showed clean and shiny surface when it was melted. Slump ratio of the solder pastes was low when the carbon numbers of the dicarboxylic acid were 1-3. Spreadability was high when the carbon number was over 2. Zero cross time of wetting balance test was under 1 sec when the carbon number was over 3. When activator was oxalic acid or malonic acid, zero cross time was over 1 sec and maximum wetting force was low. Fluxes with the oxalic acid and malonic acid showed decomposition at the temperature close to melting point. Among the dicarboxylic acids, glutaric acid provided excellent slump, spreadability, and wettability.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.47 no.5
• /
• pp.364-370
• /
• 2019

In this paper, an individual blade control (IBC) methodology is applied to find the best input scenario for vibratory hub loads reduction of XH-59A co-axial rotorcraft in high speed flight. A comprehensive aeromechanics analysis code CAMRAD II is employed to analyze the aircraft. A parametric study is conducted for optimum IBC inputs leading to the maximum vibration reduction. Numerical results demonstrate that up to 50% reduction in the hub vibration index is obtained for an IBC input at 3/rev frequency with the amplitude and phase angle of 0.5 deg. and 300 deg., respectively. The upper rotor exhibits as much as 6% more vibration reduction as compared to that of the lower rotor due to a clean inflow characteristic of the rotor. It is found that further vibration reduction gain is reached for IBC inputs with advancing-side only control. The hub vibration becomes reduced by up to 17% in reference to that with full rotor disk control. It is noted that the additional gain is obtained with significantly less power input with the advancing-side only control.

• Korean Chemical Engineering Research
• /
• v.57 no.3
• /
• pp.413-419
• /
• 2019

In the recent, as a world demand of energy resources has been transformed from fossil fuels to hydrogen-based clean energy resources, a huge attention has been attracted to increase the performance and decrease a production cost of core materials in fuel cell technology. The utilization of reinforced composite membranes as electrolytes in the polymer electrolyte membrane fuel cells can reduce the use of high cost perfluorosulfonic acid (PFSA), mitigate the cell impedance, and improve the dimensional stability as well as the interfacial stability, giving rise to achieve both an improved performance and a reduction of production costs of the fuel cell devices. In this study, we investigate the effects of physical characteristics and cell performances according to the various ionomer solvents in the solution based manufacturing process of reinforced composite electrolyte membrane.

• Management & Information Systems Review
• /
• v.37 no.4
• /
• pp.41-62
• /
• 2018

As the volume of unstructured data increases through various social media, Internet news articles, and blogs, the importance of text analysis and the studies are increasing. Since text analysis is mostly performed on a specific domain or topic, the importance of constructing and applying a domain-specific dictionary has been increased. The quality of dictionary has a direct impact on the results of the unstructured data analysis and it is much more important since it present a perspective of analysis. In the literature, most studies on text analysis has emphasized the importance of dictionaries to acquire clean and high quality results. However, unfortunately, a rigorous verification of the effects of dictionaries has not been studied, even if it is already known as the most essential factor of text analysis. In this paper, we generate three dictionaries in various ways from 39,800 news articles and analyze and verify the effect each dictionary on the accuracy of document classification by defining the concept of Intrinsic Rate. 1) A batch construction method which is building a dictionary based on the frequency of terms in the entire documents 2) A method of extracting the terms by category and integrating the terms 3) A method of extracting the features according to each category and integrating them. We compared accuracy of three artificial neural network-based document classifiers to evaluate the quality of dictionaries. As a result of the experiment, the accuracy tend to increase when the "Intrinsic Rate" is high and we found the possibility to improve accuracy of document classification by increasing the intrinsic rate of the dictionary.

• Journal of Korean Classical Literature and Education
• /
• no.15
• /
• pp.355-387
• /
• 2008

The purpose of the study was to decide Korean translation and the copying period of "Korean Translation of " and to look all around their characteristics in different versions carefully until now. The "Korean Translation" is a collection of Korean-translated romance and love stories excavated by a professor Kim,Il Geun, and there is not a little meaning in the context of novel history in the point of view of 'Korean translation of a court possession'. Arranging conclusion of the study generally, it is as follows. (1) Considering phonological phenomena, grammar and vocabulary in the study of Korean language, it is presumed that they would be translated into Korean and copied between the regime period of the King Sukjong and the regime period of the King Yungjo in the Joseon Dynasty. For, they were composed of a middle declaration of copied 'Myeoknambon "Korean Translation of Taepyeonggwanggi(태평광기)"' and 'NakseonJaebon(낙선재본)' between the middle of the 17th century and the middle of the 18th century and the regime period of the King Jeongjo in the Joseon Dynasty appointed as the background period of the novels should be excepted. Consequently, through the Korean Translation, we can confirm that the novel scope between the 17th century and the 18th century in Korean novel history was widened until 'The Royal Court' and 'Women'. (2) In the side of vocabulary, the "Korean Translation" also has not a little meaning in the side of a collection translated in the Royal Court. It doesn't have new vocabularies, but partial vocabularies as '(Traces:痕)' '(Clean eyes:明眸)', ' (Sail:帆)', '(Get up:起)', '글이플(Weak grass:弱草)', '쇼록(Owl:? 梟 or 鴉?)', '이 사라심(This life:此生)', and '노혀오매(Look for:訪)' are good data in the study of Korean language. (3) The "Korean Translation" is a valuable data about translation and copying of a court novel and we can discover intentionally changed parts and partially omitted sentences rather in the than in the . There are differences between a translation book and a copying book and we can catch sight of intention of translation and unsettledness of copying in the second work. Therefore, we can know that the "Korean Translation" has a double context which one work is translated and a work in different version is derived, compared to a simple copy. (4) The "Korean Translation" has a close relation with "Hangoldong(閒汨董)", but it doesn't regard the same copy as a foundation. The basic copy of translation of the "Korean Translation" is a different version of the same line as "Hangoldong" and "Jeochobon(저초본:정명기 소장본)" and is more similar line to "Hangoldong", but it is also not the same basic copy. (5) Considering that the "Korean Translation" doesn't has a distinct relation with the "Hangoldong", there is no correlation between the "Korean Translation" and and the "Hangoldong" and . In addition, we could not discover a writer's identity between the two.

• Korean Chemical Engineering Research
• /
• v.59 no.4
• /
• pp.542-547
• /
• 2021

Glass lined impellers are corrosion resistant to most chemicals, including strong acids, and also have a smooth, non-stick surface, easy to clean and free from impurities in the process. Glass lined home base impeller is a multi-purpose impeller designed to stir a wide viscosity range of liquids from low viscosity fluids to high viscosity fluids, among others, cell culture, yeast culture, and beer fermentation pots, especially used for air-water system breathable stirring. The glass lining for HB impellers, which are simple in structure and competitive in performance, is essential to have upper and lower division in order to make the joint area between the impeller and shaft as small as possible. The upper and lower division of the impeller hardly affects the mixing performance, but the aeration performance. In this study, in order to optimize the shape of the Glass Lining HB impeller, a study was conducted on the effect of the angle between the upper and lower impellers, the clearance between the impellers, and the number of baffles on the aeration power. The optimal shape and baffle plate conditions for the Glass lined HB impeller were derived through the study results that the angle and the clearance between the upper and lower impellers decreased the ration of the power consumption with aeration P_g and that without aeration P₀, P_g/P₀.