• Korean Journal of Food Science and Technology
• /
• v.35 no.2
• /
• pp.206-210
• /
• 2003

Effects of NaCl concentration (0, 1, 2, and 3%) on the physico-chemical characteristics of dark, firm, dry (DFD) and normal meat batter were examined. Before heating, pH values of DFD and normal meat batter decreased up to 0.23 (DFD) and 0.2 (normal) units, which after heating increased up to $0.16{\sim}0.28$ and $0.17{\sim}0.23$ units, as NaCl concentration increased from 0 to 3%. Cooking loss and diameter reduction of DFD meat batter were lower than those of nomal meat batter and decreased. whereas protein solubilities and emulsion stabilities of DFD and normal meat increased, with increasing NaCl concentration. Protein solubility and emulsion stability of DFD meat were higher than those of nomal meat (p<0.05). Viscosity and hardness of DFD meat batter were higher than those of normal meat batter and increased as NaCl concentration increased from 0 to 3%.

• Journal of the Korean Chemical Society
• /
• v.41 no.12
• /
• pp.653-660
• /
• 1997

Silicone rubber-matrix membranes doped with tetradecyltrimethylammonium chloride (TDTMACl) are used to enhance electrode performance for chloride measurements in physiological samples. The optimized membrane formulation incorporates 95.4 wt% silicone rubber and 4.6 wt% TDTMACl, and its pH response is negligible in the range of pH 6-10. The TDTMACl-doped silicone rubber membrane exhibits sub-Nernstian response to chloride from 10 to 300 mM (-37.5 mV/decade), but its selectivities for chloride over other anions are remarkably enhanced: KpotCl,NO3=1.3, KpotCl,I=2.0, KpotCl,Sal=0.8, KpotCl,SCN=2.0 and KpotCl,ClO4=0.8. Furthermore, since the silicone rubber-matrix membrane exhibits better adhesion to the solid surface than do PVC membranes, the lifetime of the coated-wire type membrane electrode is greatly improved. The response properties toward chloride and salicylate for solid-state sensor are not significantly changed after at least 35 days of use.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.31 no.5
• /
• pp.796-801
• /
• 2002

To investigate the effects of Ewomia ulmoides olivon extract on the serum and hepatic lipid status and anti-oxidant enzyme activities, male Sprague Dawley (SD) rats were given high fat diets and Eucomia ulmoides olivon ethanol extracts for 6 weeks. Rats were divided into (our groups consisting the control (C), Eucomia ulmoides oliuon extract fed group (CE), high fat diet group (CL) and the extract and high fat fed group (CLE). Eucomia ulmoides oliuon ethanol extract lowered total cholesterol, but increased HDL-cholesterol and HDL-cholesterol/total cholesterol of the serum compared to the control. On the other hand, the ratio of HDL-cholesterol/total cho-lcsterol (HTR) was increased by 55% (p<0.05). High fat diet significantly increased serum cholesterol contents, but decreased HDL-cholesterol level and HTR (p<0.05). Atherogenic index (AI) of CL group was increased by almost four times of the control (p<0.05). Triglycerides (TG) and phospholipids were also increased by high fat diet. Eucomia ulmoides oliuon ethanol extract decreased the levels of TG (p<0.05) and phospholipids (p<0.05). Although liver antioxidant engyme activities including glutathione sulfur transferase (GST), superoxide dismutase (SOD) and catalase were decreased by high fat diet, those were stimulated by the administration of Eucommia ulmoides olivon ethanol extract.

• Journal of Korean Society of Forest Science
• /
• v.89 no.5
• /
• pp.691-696
• /
• 2000

Syzygites megalocarpus occurred on the fruit bodies of Tricholoma matsutake, Leccinum rugosiceps, Pulveroboletus ravenelii, Russula emetica, and Amanita pseudoporphyria in the field. We could select Malt Extract Agar, Mueller Hinton Medium and Potato Dextrose Agar as optimal media among eight media. Syzygites megalocarpus showed an optimal temperature around $23^{\circ}C$ with optimal pH 6.0. Growth of S. megalocarpus on PDA was inhibited by 36.5% at 5% NaCl compared with without NaCl and did not grow at more than 8% NaCl in 2 days after inoculation. However, it grew 1.1 cm in 10% NaCl in 5 days after inoculation. Growth of Tricholoma matsutake on PDA was inhibited by increasing contration of NaCl and did not nearly grow at 2.5% NaCl in 60 days after inoculation. Because S. megalocarpus grew at high concentration of NaCl, we concluded that NaCl should not use for controlling S. megalocarpus on the fruit body of T. matsutake.

• Journal of Korean Society of Environmental Engineers
• /
• v.39 no.3
• /
• pp.164-168
• /
• 2017

This study experimentally determined the effect of calcium ion ($Ca^{2+}$) (0-0.55 mM) and intial pH (4.0-10.0) on phosphorus (P) removal in synthetic wastewater (2 mg P/L) using titanium tetrachloride ($TiCl_4$) (0.12-0.18 mM). At TiCl4 concentration ([$TiCl_4$]) = 0.12 mM, the P removal efficiency was the highest (95.1%) at pH 7 but the efficiency decreased to 51.4% at pH 8. The P removal efficiency was 55.6% at $Ca^{2+}$ concentration ([$Ca^{2+}$]) = 0 mM but the efficiency increased to 90.5% at [$Ca^{2+}$] = 0.045 mM at [$TiCl_4$] = 0.12 mM. On the other hand, the P removal efficiency difference was not large (96.5-99.5%) with [$Ca^{2+}$] at [$TiCl_4$] = 0.15-0.18 mM. Within the design boundaries of $0.00{\leq}[Ca^{2+}]{\leq}0.18mM$ and $7.0{\leq}initial$ $pH{\leq}9.0$ at [$TiCl_4$] = 0.12 mM, the 90% P removal efficiency could be achieved at $[Ca2+]{\geq}0.10mM$ with pH 8.0 and $[Ca2+]{\geq}0.12mM$ with pH 9.0.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.3
• /
• pp.179-191
• /
• 2013

This study was conducted to comparatively assess quantitative indicating factor for biomineralization characterizing $CO_2$ mineralization on three type of minerals (i.e., $CaCl_2$, $MgCl_2$, $CaCl_2-MgCl_2$) in an aqueous solution amended with Bacillus pasteurii or indigenous microorganisms for a S landfill cover soil. For given three types of minerals, $NH_4{^+}$ (urease activity) was released at the highest of 88 mg/L for $MgCl_2$, then 85 mg/L for $CaCl_2$, and the lowest of 42 mg/L for $CaCl_2-MgCl_2$. $CO_2$ gas in the head space was completely removed after 12, 12, and 24 hr for $CaCl_2$, $MgCl_2$ and $CaCl_2-MgCl_2$, respectively. $Ca^{2+}$ concentration in $CaCl_2$ solution was the quickest and the greatest decreased 92% for 12 hr whereas that in $CaCl_2-MgCl_2$ solution was lower at 85% for 36 hr. $Mg^{2+}$ concentration in $MgCl_2$ was more efficiently decreased at 46% for 48 hr than that of $CaCl_2-MgCl_2$ solution of 38.5% for 72 hr. Regardless of types of minerals or their concentration, pH was changed from 5.5 to 9 by biomineralization being progressed. Microbial activity ($OD_{600}$) was also changed from 0 to 0.6. SEM images indicated that spheroidal and trapezoid shape crystal were formed, which were identified as of $CaCO_3$ (Calcite) and $MgCO_3$ (Magnesite) by X-ray diffraction. In the long run, $NH_4{^+}$ (urease activity), $CO_2$ gas, $OD_{600}$, pH, $Ca^{2+}$ and $Mg^{2+}$ would be suitable for reasonable indicating factor in order to assess the degree of biomineralization efficiency.

• The Korean Journal of Malacology
• /
• v.26 no.2
• /
• pp.145-149
• /
• 2010

The effects of diluents composition on cold storage for Scapharca broughtonii (Schrenck) sperm were examined in the percentage of sperm activity and survival rate. Various diluents of glucose solutions (10 mM Hepes-pH 7.8), 600 mM NaCl, stein solution, Ringer's solution (230 mM NaCl, 8 mM KCl, 2 mM $CaCl_2$, 3.7 mM $MgCl_2$, 0.2 mM $NaHCO_3$, 10 mM Hepes-pH 7.8), 20%, 25% ASW (NaCl 2.7 g + KCl 0.07 g + $CaCl_2$ 0.12 g + $MgCl_2$ 0.46 g + $NaHCO_3$ 0.05 g + distilled water 100 ml) were used to store th sperm at $4^{\circ}C$. The storage effect was evaluated using sperm activity and survival rate. Ringer's solution was found to be better diluents which maintained high activity and survival rate of sperm for a storage period of 7 days. Optimal pH of diluents to store the sperm at $4^{\circ}C$ is 7.5.

• Bulletin of the Korean Chemical Society
• /
• v.1 no.1
• /
• pp.1-4
• /
• 1980

During the study of the kinetics of Cl atom reactions by atomic fluorescence method we observed anomalous fluorescence emission for some atomic transitions. Instead of usual decrease of the fluorescence intensity by adding substrate, 1363 A transition $(^2P^{\circ}_{3/2}{\to}^2P_{1/2})$ intensity increased by adding substrate. From the normally behaved fluorescence lines the absolute rate constant for the reaction, Cl + $CH_3Cl{\to}$, was found to be $4.2{\times}10^{-13}$ cc/molecule sec at $20^{\circ}C$.

• Journal of Electrochemical Science and Technology
• /
• v.15 no.2
• /
• pp.268-275
• /
• 2024

The study examined the electrogeneration of hypochlorite ions (ClO^-) via electrolysis of aqueous NaCl solutions using a dimensionally stable anode-type (DSA-type) electrode based on platinum and palladium oxides supported on titanium mesh (Ti/PtPd(10%)O_x). The electrogenerated ClO^- was quantified on the basis of the absorption band at 292 nm (A_λ = 292) of the UV-Vis spectrum. The effect of initial pH, concentration of NaCl, cell potential difference and electrolysis time were investigated in this study. The results showed that the electrolysis of aqueous NaCl solutions increases the solution pH up to high values (≥ 8.0) that favor the formation of ClO^- over chlorine or hypochlorous acid. The hypochlorite concentration increases significantly at pH values > 7.0 and shows a linear trend with increasing NaCl concentration and with increasing cell potential difference. When the cell potential and NaCl concentration are held constant, the maximum hypochlorite value during electrolysis depends on both the cell potential and NaCl concentration. The Ti/PtPd(10%)O_x anode favors the production of hypochlorite ions, making this anode a promising material for use in electrochemical oxidation of wastewater via an indirect mechanism.

• Journal of the Korean Vacuum Society
• /
• v.6 no.3
• /
• pp.282-286
• /
• 1997

Reactive ion etching (RIE) characteristics of InP in the $Cl_2$/ CH_4/H_2$ discharges was investigated, as a function of the rf power, substrate temperature and gas composition. It was observed that the etch rate increased as the rf power, sample temperature and/or $Cl_2$ gas concentration increased. Etch rate of about 0.9$\mu\textrm{m}$/min was obtained at the optimum condition of 150W rf power, $180^{\circ}C$ substrate temperature and $10Cl_2$ /$5CH_4/85H_2$ gas ratio. Polymer formation was completely suppressed by adding $Cl_2$ to the $CH_4$ /$H_2$ discharges.