• 산업경영시스템학회지
• /
• 제21권45호
• /
• pp.365-374
• /
• 1998

Control Chart is a powerful tool to detect that process is in control or out of control. CIM can have real effect when CIM involve automated quality control. A neural network approach is used for unnatural pattern detecting of control chart. The previous moving window method uses all unnatural pattern that is detected as moving time window. Therefore, It trains a large number of unnatural pattern and takes training time long. In this paper, the proposed method tests a small number of training unnatural pattern which modifies test data without repeating time. We shows that the proposed method has differences In training time and identification rate on the previous moving windows method. As results, we reduced training time and obtain the same identification rate.

• 산업공학
• /
• 제3권2호
• /
• pp.13-22
• /
• 1990

The efficient and economical use of an FMS presupposes a good capability : flexibility, reliability, maintainability and built-in quality assurance. One subsystem of an FMS, which often increases capability, is the tooling management. The main problems associated with tooling in an FMS are large variety of tools, many setups, insufficient use of presetted tools, tool condition control, tool shortages, errors in tooling data and maintainence. This paper presents a reseach on the development of a system which manages the tool data for the factory using NC turning machines. The tool information concerning each production stages of the industry is studied in the CIM(Computer Integrated Manufacturing) view point.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1998년도 춘계학술대회 논문집
• /
• pp.40-52
• /
• 1998

Among the non-traditional machining methods, Abrasive waterjet machining process shows big promise in drilling difficult-to-machine materials due to its numerous advantages such as absence of heat affect zone and thermal distortion. Acoustic emission signal technique is used to understand about material removal mechanisms during abrasive waterjet drilling process. More information about the drilling process is derived through frequency decomposition of auto regressive moving average modeling representing acoustic emission signals.

• 한국정밀공학회지
• /
• 제18권8호
• /
• pp.164-173
• /
• 2001

The configuration of injection molded part can be classified into primary feature and supplementary feature. Even though supplementary features such as ribs, snap fits and bosses make mold more complicated, which cause the increasement of the mold cost, supplementary features should be attached to primary features because of assembly, reinforcement, moldability and other functional purposes. But it is not easy for novice designers to design them appropriately because of the profound knowledge related to Injection molding. In this paper, the intelligent design tool called ISFD(Intelligent Supplementary Feature Designer) which supplies easy, simple, time and cost-effective design method has been studied and developed. A knowledge-based design system is a new tool which enables the concurrent design and CIM with integrated and balanced design decisions at the initial design stage of injection molding.

• 제어로봇시스템학회논문지
• /
• 제12권6호
• /
• pp.600-607
• /
• 2006

For the effective operation of manufacturing system, FMS(Flexible Manufacturing System) and CIM(Computer Integrated Manufacturing) system are developed. In these systems, a machine tool is the target of integration in last 3 decades. In nowadays, the conventional concept of machine tools is changing to the autonomous manufacturing device based on knowledge-evolution through applying advanced information technology in which open architecture controller, high speed network and internet technology are contained. In this environment, a machine tool is not the target of integration but the subject of cooperation. In the future, a machine tool will be more improved in the form of a knowledge-evolution based device. In order to develop the knowledge-evolution based machine tools, this paper proposes the structure of knowledge evolution in M2M(Machine To Machine) and the scheme of a dialogue agent among agent-based modules such as a sensory module, a dialogue module, and an expert system. The dialogue agent has a role of interfacing with another machine for cooperation. To design the dialogue agent module in M2M environment, FIPA-OS and ping agent based on FIPA-OS are analyzed in this study. Through this, it is expected that the dialogue agent module can be more efficiently designed and the knowledge-evolution based machine tools can be hereafter more easily implemented.

• 한국정밀공학회지
• /
• 제12권9호
• /
• pp.115-125
• /
• 1995

부품가공에 있어서 생산성향상을 위하여 버제거를 위한 고도의 기술이 더욱 중요하게 되었다. 특히 CIM 체제에서는 버제거의 자동화를 위하여 가공중에 발생하는 버형성과 파단현상을 정량적으로 예측할 필요성이 더욱 커졌다. 이미 연구된 2차원절삭에서의 버형성 모델을 실제적인 3차원절삭에 적용하기 위하여 기존의 모델을 수정하는 작업이 이루어졌다. 3차원 절삭모델로는 절삭인선에 수직한 면에서의 칩과 공구의 상대운동에 의해서 결정된다고 하는 Rubenstein의 가정이 사용되었다. 본연구에서 다루에되는 롤오버(roll-over) 버는 항상 공구진행방향으로 발생하기 때문에 3차원절삭에서의 버형성을 공구진행방향의 평면내에서의 2차원 절삭의 집합 으로 가정하였다. 공구의 기울림각(inclination angle)이 커질수록 버형성의 크기나 파단면의 크기가 감소하였다. 두종류의 파단이 버형성중에 관찰되었다. 하나는 가공물 끝면에 평행하게 파단면이 발생하였으며 다른 하나는 이에대하여 기울어진 파단이 일어났다. 가공물 끝면에 평행한 경우는 수정된 모델로부터 등가초기공구위치( equivalent initial tool distance)로부터 예측이 가능하며 기울어진 경우는 이결과와 공구의 기울림각으로부터 파단위치를 예측할 수 있다.

• 대한기계학회논문집A
• /
• 제27권10호
• /
• pp.1728-1737
• /
• 2003

The vertical lathe is a very popular machine tool in modem manufacturing industries because of its small area of installation. The small installation area is highly desirable for the flexibility improvement of the manufacturing systems such as FMS, CIM, and IMS. The vertical lathe, however, has much taller height compared to the traditional horizontal lathe, and consequently more severe vibrations. In this study, the structure of a vertical lathe is analyzed to investigate the dynamic properties and further to establish some ideas of the design alteration for the improved dynamic stability even at the higher operating speed. The simulation model is implemented to apply those design alterations for the optimization. The result of this study is not only prosperous but also ready to be applied to the optimum design of various machine tool structures for the improved stability.

• 한국정밀공학회지
• /
• 제14권7호
• /
• pp.126-136
• /
• 1997

This paper describes a task level cell programming environment that deals with difficulties in programming Flexible Manufacturing Cells (FMCs), and consists of the cell programming editor and the automatic generation module. In the cell programming editor, cell programs can be developed with task- oriented cell specifications that reduces the amount of details to be considered by cell programmers. The automatic generation module transforms task specifications into executable programs used by cell constituents. The development tool in designing the environment is an object-oriented approach which provides a simple to use and intuitive user interface, and allows for an easy development of object models associated with the environment. Test results are illustrated in order to demonstrate the applicability of the developed envifonment.

• 연구논문집
• /
• 통권25호
• /
• pp.121-128
• /
• 1995

The early day of manufacturing automation systems are NC machine tool Based automation, and now it become FA, DNC, FMC, FMS, CIM and IMS. Manufacturing Automation Technology is applied the increase of all industrial manufacturing competitve power. so the demand of this skill is repidly increase. This Technology can solve lack of manpower, decrease of productivity, and become weakened international competitive. But, automation rate of our country is 30-40%, because the level of domestic technology is low, so we need systemic research of manufacturing automation. The targets of this study are increase the data processing ability of CNC controller, and development of autonomous manufacturing system that can decision making between production module such as setup, manufacturing, inspection and transportation and part that object of manufacturing.

• 전기학회논문지
• /
• 제60권7호
• /
• pp.1324-1330
• /
• 2011

This paper presents the development of gateway for smart grid for the interoperable communication between IEC 61850 station leveled devices and one of legacy Modbus, DNP3, and IEC60870-5-101/104/103 communication protocol devices of bay level in substation or for the exchange of information between IEC 61850 substation and SCADA control center. The data-mapping model is designed for the exchange of information and the gateway configuration tool is developed for generating meta-data based on XML Schema. this paper is mostly concerned with the design and realization of gateway system for the interoperable data communication between a legacy protocol device and IEC61850 based devices or systems.