• 대한기계학회논문집A
• /
• 제27권10호
• /
• pp.1728-1737
• /
• 2003

The vertical lathe is a very popular machine tool in modem manufacturing industries because of its small area of installation. The small installation area is highly desirable for the flexibility improvement of the manufacturing systems such as FMS, CIM, and IMS. The vertical lathe, however, has much taller height compared to the traditional horizontal lathe, and consequently more severe vibrations. In this study, the structure of a vertical lathe is analyzed to investigate the dynamic properties and further to establish some ideas of the design alteration for the improved dynamic stability even at the higher operating speed. The simulation model is implemented to apply those design alterations for the optimization. The result of this study is not only prosperous but also ready to be applied to the optimum design of various machine tool structures for the improved stability.

• International Journal of CAD/CAM
• /
• 제6권1호
• /
• pp.3-8
• /
• 2006

The application of three-dimensional (3-D) CAD has been popularized for design and production and digital manufacturing has been spreading in many industrial fields. By simulation of the production process using 3-D digital models, which are the core of CIM (Computer Integrated Manufacturing) system, the efficiency and safety of production are improved at each stage of work, and optimization of manufacturing can be achieved. This paper firstly describes the concept of "simulation based production" in shipbuilding and also digital manufacturing; the 3-D CAD system is indispensable for effective simulation because ship structure is three dimensionally complex. By simulation, "computer optimized manufacturing" can be possible. The most effective fields of simulation in shipbuilding are in jobs where many parties have to cooperate, while existing two-dimensional drawings are hardly observed the whole structures due to interference between structures or equipment of complex shape. In this paper some examples of the successful application in IHIMU (IHI Marine United Inc.) are shown: assembly of a pipe unit, erection of a complex hull block, carriage of equipment, installation of a propeller, and access in an engine room.

• 산업경영시스템학회지
• /
• 제15권26호
• /
• pp.217-235
• /
• 1992

종래에서 부터 원가관리의 대상은 제품시방이 결정되고 제조준비가 대체로 완료된 후의 활동, 즉 제조활동이었다. 그러나 우리나라에서는 제조활동이 자동화, FMS화, CIM화가 진전되어, 제조과정에 들어와서부터 원가를 콘트롤하는 여지가 매우 좁아져 왔다. 따라서 관리효과를 얻기 위해서 제조준비활동이나 제품설계 활동으로 관리대상을 이동시킬 필요가 생기게 되었다. 이와 같은 배경하에서 제품설계단계와 제조준비단계에서 결정되는 신제품의 원가를 관리하고자 하는 것이 여기서 말하는 제품설계단계의 원가관리(일본에서는 원가기획이라고 부르는 경우가 있다. )인것이다. 제품설계단계의 원가관리의 개념은 수년전 부터 확대화의 경향에 있다. 즉, 그것은 단순히 제품설계와 제조준비의 단계에서 결정되는 제품원가의 관리만으로서가 아니라 신제품에서 기대되는 이익의 예측과 관리까지도 포함하기에 이르고 있다. 그리고 제품설계단계의 원가관리의 대상영역에 제품 컨셉트 작성활동이라든가 판매가격설정에 이르는 문제까지 포함하고 있는 것이며, 마케팅 전략이라든가 장기이익계획으로 보아서 전개하는 것으로 보이는 것이다. 이와 같이 아주 다양한 내용을 지닌 제품설계단계의 원가관리로 되고 있는 것이다. 이와 같은 원가기획의 유용성과 발전성을 표시하는 것이며 금후의 연구과제에 대한 명시적인 것이기도 한 것이다. 그러나 여기에서는 이러한 현상을 찾아보면서 제품설계단계의 원가관리에 대한 일반적인 Job plan(제품설계단계의 원가관리를 효과적으로 실시하기 위한 표준적 수준)의 주요과제에 대하여 논술키로 한다.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 1991년도 춘계공동학술대회 발표논문 및 초록집; 전북대학교, 전주; 26-27 Apr. 1991
• /
• pp.67-76
• /
• 1991

For several years, graduate students and faculty of the Engineering Systems Research Center at U.C., Berkeley have been studying new methods of planning and scheduling in a computer integrated manufacturing environment, with particular emphasis on large scale integrated circuit fabrication. One part of this work, focusing on short interval scheduling, uses simulation models as a primary research tool. We have built two versions of the same basic model (programmed in C) to study two different problems (one deals with machine down time and the other with setup times). These have proven to be efficient for studying particular problems, but are difficult and time consuming to modify. We are convinced that our research will be more effective: (1) if it were easier to build special purpose models tailored to the research question at hand; and (2) if we had better interfaces to graphics output. Commercially available factory simulators are inadequate for this research for a variety of reasons. Existing packages such as SIMKIT, SLAM, SIMAN and EXCELL have their own weaknesses. Typically, they are hard to develop and to modify. They do not allow for adding new dispatching decisions or release decision. Also, it is hard to add more machines to existing environment or change the route the product flows. For these various reasons, we had developed a new simulation package having flexibility and modularity. In this paper, based on experiences gained in the application of object oriented programming, we discuss unique features of the simulator developed in OOPS and ways to take advantage of features in developing and using manufacturing simulation software written in the OOPS

• Journal of Plant Biotechnology
• /
• 제33권4호
• /
• pp.237-242
• /
• 2006

Commercial cultivars and elite germplasms of barely (Hordeum vulgare L) are still recalcitrant to genetic transformation because of the lack of an efficient regeneration system. In this study, we established an efficient plant regeneration procedure from embryogenic calli derived from mature embryos. Callus induction from germinated mature embryos was best as over 95% in CIM medium (CI medium containing $2.5mg/{\ell}$ dicamba) under dark incubation. Development of embryogenic callus was highest as over 50% in CI3D medium (EC medium supplemented with $3mg/{\ell}$ 2,4-D). The highest regeneration of plants from embryogenic callus (40%) was obtained with CIS medium ($SI+1mg/{\ell}IAA\;and\;2mg/{\ell}\;BA$). These plant regeneration conditions could be useful in improving barley transformation efficiency.

• 한국게임학회 논문지
• /
• 제15권4호
• /
• pp.145-156
• /
• 2015

현재까지 모바일 게임 사용자 연구는 개별 콘텐츠의 재미, 중독성, 편의성과 같은 1차적 정서를 분석하는 차원에 머물러 있다. 그러나 스마트폰의 확산 이후 사용자들의 멀티태스킹이 보편화되면서 사용자의 게임 콘텐츠 경험은 복잡해지고 있다. 따라서 다양한 행위를 동시에 수행하는 사용자의 관점에서 모바일 게임에 대한 보다 깊이 있는 분석이 필요한 상황이다. 본 연구는 집단 감성의 관점에서 모바일 게임 사용자들의 연결된 심성 모형을 포착하고자 했다. 이를 위해 사용자들의 비의도성과 의도성을 동시에 포착할 수 있는 소셜 데이터 분석을 실시했으며, 그 결과로 서비스의 교차 소비, 정보 추천방식의 다양화, 관계 기반의 과제 경험을 주요 이슈로 제시했다.

• 조명전기설비학회논문지
• /
• 제28권11호
• /
• pp.77-83
• /
• 2014

The Estimation of State of Charge(SOC) for batteries is an important aspect of a Battery Management System(BMS). A method for estimating the SOC is proposed in order to overcome the individual disadvantages of the current integral and Open Circuit Voltage(OCV) estimation methods by combining them using Extended Kalman filter(EKF). The non-linear characteristics of the Li-Ion RC battery model used in this study is also solved through EKF. The proposed method is simulated in a Matlab environment with a Li-Ion Kokam battery (3.7V, 1,500mAh). Results showed that there is an improvement in the estimation error when using the proposed model compared to the conventional current integral method.

• KSBB Journal
• /
• 제15권6호
• /
• pp.605-608
• /
• 2000

Oligodeoxynucleotides (ODNs) were separated by high-performance membrane chromatography (HPMC), a combined system of chromatography and membrane. The separation mechanism involved anion-exchange, and the stationary phase was cation CIM (Convective Interaction Media) DEAE disk (16${\times}$3 mm). Two types of mobile phase were used, buffer A (20mM Tris-HCl, pH 7.4) and buffer B (buffer A + 1M NaCl). As the amount of NaCl dissolved in buffer linearly increased, the retention time shortened, which enabled a gradient elution mode. Based on the number of theoretical plates and resolution observed, the optimum mobile phase and operating condition (Buffer A/Buffer B=50/50 - 20/80 vol%, gradient time 2 min) were experimentally determined. In this experimental condition, ODNs were separated within 2 min at a mobile phase flow rate of 6 ml/min.

• 제어로봇시스템학회논문지
• /
• 제12권6호
• /
• pp.600-607
• /
• 2006

For the effective operation of manufacturing system, FMS(Flexible Manufacturing System) and CIM(Computer Integrated Manufacturing) system are developed. In these systems, a machine tool is the target of integration in last 3 decades. In nowadays, the conventional concept of machine tools is changing to the autonomous manufacturing device based on knowledge-evolution through applying advanced information technology in which open architecture controller, high speed network and internet technology are contained. In this environment, a machine tool is not the target of integration but the subject of cooperation. In the future, a machine tool will be more improved in the form of a knowledge-evolution based device. In order to develop the knowledge-evolution based machine tools, this paper proposes the structure of knowledge evolution in M2M(Machine To Machine) and the scheme of a dialogue agent among agent-based modules such as a sensory module, a dialogue module, and an expert system. The dialogue agent has a role of interfacing with another machine for cooperation. To design the dialogue agent module in M2M environment, FIPA-OS and ping agent based on FIPA-OS are analyzed in this study. Through this, it is expected that the dialogue agent module can be more efficiently designed and the knowledge-evolution based machine tools can be hereafter more easily implemented.

• 한국정보시스템학회지:정보시스템연구
• /
• 제8권1호
• /
• pp.27-44
• /
• 1999

Case-Based Reasoning(CBR) offers a new approach for developing knowledge based systems. CBR has several research issues which can be divided into two categories : (1) static issues and (2) dynamic issues. The static issues are related to case representation scheme and case data model, that is, focus on casebase which is a repository of cases. The dynamic issues, on the other hand, are related to case retrieval procedure and problem solving process, i.e. case adaptation phase. This research is forcused on retrieval procedure Traditional query processing accepts precisely specified queries and only provides exact answers, thus requiring users to fully understand the problem domain and the casebase schema, but returning limited or even null information if the exact answer is not available. To remedy such a restriction, extending the classical notion of query answering to approximate query answering(AQA) has been explored. AQA can be achieved by neighborhood query answering or associative query answering. In this paper, neighborhood query answering technique is used for AQA. To reinforce the CBR process, a new retrieval procedure(cooperative CBR) using neighborhood query answering is proposed. An neighborhood query answering relaxes a query scope to enlarge the search range, or relaxes an answer scope to include additional information. Computer Aided Process Planning(CAPP) is selected as cooperative CBR application domain for test. CAPP is an essential key for achieving CIM. It is the bridge between CAD and CAM and translates the design information into manufacturing instructions. As a result of the test, it is approved that the problem solving ability of cooperative CBR is improved by relaxation technique.