• Journal of the Korean Society for Precision Engineering
• /
• v.11 no.5
• /
• pp.75-87
• /
• 1994

The demand for automatic manufacturing systems is increasing. One of the crucial obstacles to the Flexible Manufacturing System(FMS) is the lack of excellent strategies for efficient operations. The aim of this research is constructing an automaton scheme in the low level of factories where various machineries are involved. An operating strategy is established for an automation unit named as a cell which resides between the upper level computers and manufacturing shop floor. The cell is defined to fit into the total manufacturing system. The defined cell has more functions than conventional cells. A scheduling scheme is adopted for the shop floor operations. A set of software has been developed and tested through simulations and shop floor experiments.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2021.11a
• /
• pp.580-583
• /
• 2021

인공지능이 발전함에 따라 그에 따른 보안의 중요성이 커지고 있다. 딥러닝을 공격하는 방법 중 하나인 적대적 공격은 적대적 사례를 활용한 공격이다. 이 적대적 사례를 생성하는 대표적인 4가지 기법들에는 기울기 손실함수을 활용하는 FGSM, 네트워크에 쿼리를 반복하여 공격하는 Deepfool, 입력과 결과에 대한 맵을 생성하는 JSMA, 잡음과 원본 데이터의 상관관계에 기반한 공격인 CW 기법이 있다. 이외에도 적대적 사례를 생성하는 다양한 연구들이 진행되고 있다. 그 중에서도 본 논문에서는 FGSM기반의 ABI-FGM, JSMA 기반의 TJSMA, 그 외에 과적합을 줄이는 CIM, DE 알고리즘에 기반한 One pixel 등 최신 적대적 사례 생성 연구에 대해 살펴본다.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.1
• /
• pp.132-141
• /
• 1995

This paper presents a choosing method of turning devices for stable robotic assembly based on verification of a base assembly motion instability. In flexible assembly application, the base assembly needs to be maintained in its assembled state without being taken apart. Therefore, the instability of the base assembly motion should be considered when determining the guide line of choosing turning devices by evaluating a degree of the motion instability of the base assembly. To derive the instability, first we inference collision free assembly directions by extracting separable directions for the mating parts and calculate the separability which gives informations as to how the parts can be essily separated. Using these results, we determine the instability evaluated by summing all the modified separabilites of each component part within base assembly.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.2
• /
• pp.134-141
• /
• 2008

This paper presents an innovative load management technique that can effectively lower the summer peak load by adjusting the aircondition loads through smoothe coordinations between utility companies and large customers. An intelligent hierarchical load management system composed of a Central Intelligent Load Management System(CIMS) and multiple Local Intelligent Management Systems(LIMS) is also proposed to implement the reposed technique. Upon receiving a load curtailment request from the utilities, CIMS issues tokens, which can be used by each LIMS as a right to turn on the airconditioner. CIMS creates and maintains a queue for fair allocation of the tokens among the LIMS demanding tokens. By adjusting the number tokens and queue management Policies, desired load factors can be achieved conveniently. The Markov Birth and Death Process and the Balance Equations are employed in estimating various queue performances. The proposed technique is tested using a summer load data of a large apartment complex and proved to be quite effective in load management while minimizing the customer inconveniences.

• Membrane Journal
• /
• v.24 no.1
• /
• pp.10-19
• /
• 2014

Porous flat sheet membranes for separators in Zn air batteries were prepared with polyethersulfone (PES) solutions by immersion precipitation phase inversion method. PES/polyvinylpyrrolidone(PVP)/N-methylpyrrolidone(NMP) mixtures were used for casting solutions and water was used for coagulant. With the separators, Zn air batteries were fabricated. The separators were characterized by means of stress-strain test, impedance test and SEM. The Zn air batteries were tested by current interrupt method (CIM) and galvanostatic discharge method. The tensile strength increased with increasing PES content in the casting solution while the ionic conductivity decreased. On the other hand, the ionic conductivity increased while the tensile strength decreased with increasing PVP content. The effect of ionic conductivity trend of the separator in the Zn air battery was confirmed through current interrupt method and galvanostatic discharge method experiments. The battery with the separator from casting solution with higher PES content showed higher IR drop and lower discharge capacity. And the battery with the separator from casting solution with higher PVP content showed lower IR drop and higher discharge capacity.

• Journal of the Korean Electrochemical Society
• /
• v.13 no.4
• /
• pp.223-234
• /
• 2010

In this review, the theory and applications of the complex capacitance analysis, which can be utilized in analyzing capacitor-like electrochemical systems, were summarized. Theoretically, it was suggested that the imaginary capacitance plots (Cim vs. log f) can provide a simple way to analyze electrochemical characteristics of capacitive systems, without complicated mathematical calculations. The usefulness of the complex capacitance analysis has been demonstrated by applying it to analyze EDLC characteristics of practical porous carbon electrodes, ionic conductivities inside small pores, and ionic resistances in the catalyst layers of polymer electrolyte membrane fuel cells.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.3
• /
• pp.765-774
• /
• 1996

Computer Integrated Manufacturing(CIM) requires models of manufacturing processes to be implemented on the computer. These models are typically used for determining optimal process control parameters or designing adaptive control systems. In spite of the progress made in the mechanistic modeling, however, empirical models derived from experimental data play a maior role in manufacturing process modeling. This paper describes the development of a meural metwork medel for injection molding. This paper describes the development of a nueral network model for injection molding process. The model uses the CAE analysis data based on Taguchi method. The developed model is, then, compared with the traditional polynomial regression model to assess the applicabilit in practice.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10b
• /
• pp.1915-1919
• /
• 1991

The efficiency of automated assembly line is increased by realizing the automation of each assembly cell, monitoring the line information and developing the real-time line control system it. which production flow is controllable. In this paper, the several modules which are important factors when constructing automated real-time control system, such as, line control S/W module, real-time model change module, error handling module and line production management S/W module, are developed. For developing these important programming modules, real-time control and multi-tasking techniques are integrated. In this paper, operating method of real-time line control in PCB automated assembly line is proposed and for effective control of production line by using multi-tasking technique, proper operating method for relating real-time line control with multi-tasking is proposed by defining the levels of signals and tasks. CIM-Oriented modular programming method considering expandability and flexibility will be added for further research in the future.

• Journal of the Society of Naval Architects of Korea
• /
• v.38 no.2
• /
• pp.71-78
• /
• 2001

In ship building industry, CNC and CAM are mostly applied to NC cutting and manufacturing of propeller and prototype ship model. Herein, prototype ship model is producted by CAD/CAM process. Hull form data is obtained from the ship drawing and used for 3D modeling by CAD software Pro/Engineer. CAD data is transferred into CAM s/w SPEEDplus to perform CNC process and the prototype small ship model is manufactured by CNC machine. To solve data transfer among different systems. IGES and STEP neutral formats are currently used. Herein IGES format is adopted for data transfer between CAD/CAM softwares.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.6
• /
• pp.1933-1947
• /
• 1991

The synthesis of supplementary features of injection molded parts has been done empirically, since it requires profound knowledge about the features' moldability and causal effects on the properties of the part, which are not available to designers through current CAD systems. RIBBER is a knowledge module which contains knowledge to permit non-experts as well as mold design experts to generate acceptable supplementary features of injection molded parts. A knowledge-based CAD system is constructed by adding the knowledge module, RIBBER, for mold feature synthesis and appropriate CAE programs for mold design analysis to an existing geometric modeler in order to provide designers, at the initial design stage, with comprehensive process knowledge-based CAD system is a new tool which enables the concurrent design and CIM with integrated and balanced design decisions at the initial design stage of injection molding.