• 조명전기설비학회논문지
• /
• 제30권2호
• /
• pp.1-10
• /
• 2016

A system which provides multispectral near-IR and visible gray images of objects is constructed and an algorithm is derived to acquire a natural color image of objects from the gray images. A color image of 24 color patches is obtained by recovering their CIE (International Commission on Illumination) LAB color coordinates $L^*$, $a^*$, $b^*$ from their gray images using the algorithm based on polynomial regression. The system is composed of a custom-designed LED illuminator emitting multispectral near-IR illuminations, fluorescent lamps and a monochrome digital camera. Color reproducibility of the algorithm is estimated in CIELAB color difference ${\Delta}E^*_{ab}$. And as a result, if yellow and magenta color patches with around 10 ${\Delta}E^*_{ab}$ are disregarded, the average ${\Delta}E^*_{ab}$ is 2.9, and this value is within the acceptability tolerance for quality evaluation for digital color complex image.

• 대한치과보철학회지
• /
• 제33권4호
• /
• pp.645-661
• /
• 1995

As the mechanical property of composite resin improved, composite resin has been widely used esthetic dentistry. In the field of esthetic dentistry, the color of prosthetic material is very important. The purpose of this study was to evaluate the color difference of specimens, by the types of alloys and gold electrodeposit. Experimental groups were as follows : Group Prec : Au-Pt alloy with no gold coating and no resin veneer. Group Semi : Pd-Ag alloy with no gold coating and no resin veneer. Group BAse : Ni-Cr alloy with no gold coating and no resin veneer. Group Gsem : Pd-Ag alloy with no gold coating and no resin veneer. Group Gbas : Ni-Cr alloy with no gold coating and no resin veneer. Group PreR : Resin veneer on the Pd-Ag alloy without gold coating. Group SemR : Resin veneer on the Pd-Ag alloy without gold coating. Group GbsR : Resin veneer on the Ni-Cr alloy with gold coating Group BasR : Resin veneer on the Ni-Cr alloy without gold coating. In this study, colors of metal surfaces and veneered resins were evaluated by the CIE $L^{*}a^{*}b$ system. The results obtained were as follows : 1. different alloy types and gold coating make the $L^{*}a^{*}b$ system. 2. The ${\Delta}E^*$ab value between groups semi and Base was less than 1.5 and there was no $a^*$ and $b^*$ value difference between groups Gsem and Gbas 3. The values of $L^*$ and $a^*$ ain groups GsemR and GbasR were so similar that the ${\Delta}E^*$ab value was as small as 0.58. 4. In resin specimens with gold coated semiprecious or base alloys showed yellower and redder deviation than the resin specimens with precious alloy. 5. The ${\Delta}E^*$ab values between goups PreR-GsemR and groups PreR-GbasR were as small as 2.68 and 2.22 respectively.

• Current Optics and Photonics
• /
• 제4권3호
• /
• pp.221-228
• /
• 2020

We developed an all-fiber RGB laser light source module for application in an automobile head-up display. It is based on laser diodes and an optical fiber combiner that substantially enhances the flexibility of configuration and stability against harsh working conditions for automobiles. We coupled 13 laser diodes with optical fibers and merged them into a single output with a beam combiner device. Red (R), green (G), and blue (B) laser sources were employed to produce primary colors that were mixed into a white light output. An optical output power of approximately 1.5 W was achieved, and the color balance of the output lights was assessed based on the CIE 1931 color space. The optical output power was shown to be stable for over 160 h within an optical fluctuation of less than 0.27%.

• 대한소아치과학회지
• /
• 제44권1호
• /
• pp.28-37
• /
• 2017

Mineral trioxide aggreagate는 치수 치료제로서 많이 사용되고 있는 재료중 하나이다. 그 중 가장 널리 쓰이고 있는 Proroot white $MTA^{(R)}$는 치아 변색을 일으킨다는 단점이 있다. 이번 연구에서는 MTA 기반 재료들인 Proroot $wMTA^{(R)}$, $Biodentine^{(R)}$, $Endocem^{(R)}$, $RetroMTA^{(R)}$를 치수강에 각각 채워넣어 시간에 따른 치경부의 변색을 비교하고자 하였다. 교정적인 이유로 발치된 75개의 소구치를 사용하여 무작위로 4개의 실험군(n = 60)과 한 개의 대조군(n = 15)으로 나누었다. 치아는 CEJ 하방 2 mm로 수평절단 하였다. 각각의 재료들을 제조사의 지시에 따라 준비한 후 치수강에 채워넣고 입구를 레진을 이용하여 봉인하였다. 치아 색조 측정은 국제조명위원회(Commission International de I'Eclairage, CIE)의 CIE $L^*a^*b^*$ system을 사용하였다. 색조는 분광 광도계를 사용하여 재료를 넣기 전, 재료를 넣고 1일, 1주, 2주, 4주, 8주, 12주, 16주 후로 총 8번 측정하였다. 이원 변량 분산분석(Two way repeated ANOVA)을 사용하여 시간에 따른 CIE $L^*$, $a^*$, $b^*$와 ${\Delta}E$값을 비교 평가하였고 실험군과 대조군과의 통계적 유의성과 상호관계는 본페로니 검정으로 사후 검정하여 p 값이 0.05이하일 때 통계학적으로 유의하다고 간주하였다. Proroot $wMTA^{(R)}$는 시간에 따라 계속적인 $L^*$값의 감소를 보였고, $Endocem^{(R)}$은 재료를 넣은 직 후 육안으로 인지 불가능한 약간의 회색조 변색을 보였으며, $Biodentine^{(R)}$과 $RetroMTA^{(R)}$는 상대적으로 다른 재료보다 색 안정성을 보였다. 결론적으로, 방사선 불투과성 물질로서 산화 비스무스가 포함된 Proroot $wMTA^{(R)}$와 $Endocem^{(R)}$은 치관 변색을 보인 반면, 방사선 불투과성 물질로서 산화 지르코늄이 포함된 $Biodentine^{(R)}$과 $RetroMTA^{(R)}$는 시간에 따른 유의한 색 변화를 보이지 않았다.

• The Journal of Advanced Prosthodontics
• /
• 제16권1호
• /
• pp.48-56
• /
• 2024

PURPOSE. To evaluate the metameric disparities among monolithic zirconia materials with differing yttrium compositions across various lighting conditions. MATERIALS AND METHODS. Thirty-six square-shaped zirconia samples measuring 10 × 10 × 0.5 mm were prepared from monolithic zirconia materials with three different yttrium contents. A 0.2 mm thick layer of polymerized dual-polymerizable self-adhesive resin cement was created using a silicone mold with the same dimensions as the prepared zirconia specimens. To evaluate metamerism, color measurements were conducted using a spectrophotometer device on a neutral gray background in a color measurement cabinet that offers four different illumination environments. All samples underwent aging by subjecting them to 10000 thermal cycles using a thermal cycle tester. Following thermal aging, color measurements were taken once more, and the data were recorded using the CIE L^*, a^*, b^* color system. Two-way ANOVA and Post-hoc Bonferroni tests were employed to analyze the data. RESULTS. It was observed that there was no statistical difference among the color measurements made in different illumination environments of the monolithic zirconia ceramics used to evaluate metamerism (P > .05). This observation remained consistent both before and after thermal aging. After thermal aging, the color of monolithic zirconia materials exhibited a tendency towards red and yellow hues, accompanied by a decrease in brightness levels. CONCLUSION. It can be stated that different illumination conditions did not affect the metamerism of monolithic zirconia materials, but there was a color change in monolithic zirconia materials after a thermal aging period equivalent to one year.

• 한국재료학회지
• /
• 제23권12호
• /
• pp.672-679
• /
• 2013

$Fe_4[Fe(CN)_6]_3$ coated on a mica or $TiO_2$/mica surface as infrared reflective blue pigment was prepared by a hydrothermal method. $Fe_4[Fe(CN)_6]_3$, used as coloring agent, was uniformly coated on mica or $TiO_2$/mica under the optimized condition of a 1.2 : 1 weight ratio between iron(III) chloride hexahydrate and potassium ferrocyanidetrihydrate at the initial pH level of 4.5 at $70^{\circ}C$. The infrared (IR)-reflective pigments were characterized by SEM, Zeta-potenial, FT-IR, and UV-VIS NIR spectrophotometry. Especially the CIE color coordinate and total solar reflectance(TSR) properties of the pigments were investigated in relation to variation of the coating and coated substrate thicknesses. Isolation-heat paint was prepared with 20 wt% blue pigments fully dispersed in acryl-urethane resin and several additives to coat the film uniformly. The films were also measured with CIE color coordinate, TSR, and the surface temperature was recorded by an isolation-heat measuring system. The pigments and films of $Fe_4[Fe(CN)_6]_3$ coated on mica and $TiO_2$/mica showed high TSR values compared with the TSR value of $Fe_4[Fe(CN)_6]_3$ itself. According to the increase of TSR value, the property of isolation-heat is effective. To realize the optimal blue color, we applied the the pigment to $TiO_2$ coated mica(TM(b)) which has blueish interference color. The pigment of $Fe_4[Fe(CN)_6]_3$ coated on TM(b) shows a strong blue color compared with that of $Fe_4[Fe(CN)_6]_3$ coated on $TiO_2$/Mmca(TM(w)), which has a whitish interference color.

• 패션비즈니스
• /
• 제18권5호
• /
• pp.69-81
• /
• 2014

Fabric made of 100% silk was dyed with Undaria pinnatifida extracts under different conditions such as varing colorant concentration, temperature, time and dyebath pH. The dye uptake (K/S, value), CIE L*,a*,b* and Munsell values of the dyed samples and mordanted samples were measured. Colorfastness, antibacterial property and UV protection property were also evaluated. As colorants concentration increased, the dye uptake increased progressively and maximum color strength was obtained at 100% V/V. Dye uptake also increased with increasing temperature and time, and the maximum color strength was obtained at $80^{\circ}C$ and 60min. With pre-mordanting, the color of the Al and Fe mordanted silk fabrics was yellow on the Munsell color system, while the Cu mordanted fabric was a greenish color. Al and Fe post-mordanted fabrics had a yellow tone, and the Cu post-mordanted fabric had a yellow greenish tone. The light fastness property of the Cu mordanted silk fabric was relatively good, The effect of Al and Fe mordanting on fastness was insignificant. The antibacterial activity of dyed and unmordanted silk fabric was excellent, whereas fabric dyed and mordanted with Undaria pinnatifida extract demonstrated superior ultraviolet protection.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제12권2호
• /
• pp.676-692
• /
• 2018

Saliency detection in neurobiology is a vehement research during the last few years, several cognitive and interactive systems are designed to simulate saliency model (an attentional mechanism, which focuses on the worthiest part in the image). In this paper, a bottom up saliency detection model is proposed by taking into account the color and luminance frequency features of RGB, CIE $L^*a^*b^*$ color space of the image. We employ low-level features of image and apply band pass filter to estimate and highlight salient region. We compute the likelihood probability by applying Bayesian framework at pixels. Experiments on two publically available datasets (MSRA and SED2) show that our saliency model performs better as compared to the ten state of the art algorithms by achieving higher precision, better recall and F-Measure.

• 한국결정성장학회지
• /
• 제24권4호
• /
• pp.169-175
• /
• 2014

최근 각광받고 있는 디지털 프린팅을 이용한 디자인 기법은 세밀한 표현과 다양한 이미지 구현이 가능하고, 원료의 낭비가 적어 효율성이 높은 장점을 가지고 있다. 디지털 프린팅 공정에서는 cyan, magenta, yellow, black이 기본적인 디지털 4원색으로 사용되며, 도자제품에 적용되는 세라믹 안료의 경우 $1000^{\circ}C$ 이상의 고온 소성이 가능하도록 우수한 열적, 유약 안정성과 발색 특성이 요구된다. 본 연구에서는 고상합성법을 이용하여 $CaO-SnO_2-Cr_2O_3-SiO_2$ 조성의 pink-red 고온발색 무기안료를 합성하였다. $Ca(Sn,Cr)SiO_5$ 세라믹 안료의 합성 조건에 따른 물성을 XRD, SEM, PSA, FT-IR를 이용하여 분석하였고, Cr 치환량 변화가 $Ca(Sn,Cr)SiO_5$ 무기 안료의 발색 거동에 미치는 영향을 Uv-vis.와 CIE 표색계 값($L^*a^*b^*$)을 기준으로 한 색도측정을 통해 관찰하였다.

• Restorative Dentistry and Endodontics
• /
• 제23권1호
• /
• pp.424-432
• /
• 1998

To get a satisfactory result in the composite resin restorations, it is necessary to choose correct shade. At present, most of the commercial composite resins are based on the Vita Lumin shade guide or Bioform shade guide, but color differences might be expected even using the same shade in various materials. In this study, five kinds of light-cured composite resins with A2 and B3 shade were used to measure and compare the color each other while one porcelain served as a control. All composite resins (Spectrum TPH (SP), VeridonFil- Photo (VE), Z100 (Z100), Charisma (CH), Prodigy (PRO)) were filled in to the metal mold (12 mm diameter, 2 mm depth), followed by compression, polymerization and polishing with wet sandpaper. The specimens of porcelain were fabricated by using the refractory mold for porcelain. After 24 hours, the specimens were placed on the spectrocolorimeter and spectral reflectance were measured under CIE illuminant D65. After measuring the values of $L^*$, $a^*$, $b^*$ and ${\Delta}E^*$, following results were obtained; 1. The $L^*$, $a^*$ and $b^*$ values of both shade of porcelain specimens showed significantly higher than those of resin specimens(p<0.05). 2. In comparing the resin specimens of the A2 shade, differences were significant except $L^*$ values of SP-CH and PRO-VE, $a^*$ values of the VE-SP and $b^*$ values of the VE-Z100 and SP-PRO(p<0.05), 3. In comparing the resin specimens of the B3 shade, differences were significant except $L^*$ values of PRO-SP, $a^*$ values of the SP-PRO and Z100-VE and b* values of the PRO-SP(p<0.05). 4. In comparing the resin specimens of the A2 shade, color differences between materials (${\Delta}E^*$) showed the lowest value of 1.66, and the highest was 5.16. ${\Delta}E^*$ values of the materials of VE-PRO, CH-PRO, SP-PRO, SP-Z100 and SP-CH were lower than 3.3. 5. In comparing the resin specimens of the B3 shade, the lowest value of the ${\Delta}E^*$ was 0.57 and the highest was 5.92. ${\Delta}E^*$ values of Z100-CH and SP-PRO were lower than 3.3. The present study revealed there was perceptible color difference between materials even if they have the same designated shade based on Vita shade guide. The results of the present study suggested that it would be necessary to establish the reproducible and constant color specification system for an esthetic restoration.