• Title/Summary/Keyword: CHIME dating

Search Result 6, Processing Time 0.021 seconds

A Working Standard Technique far Determination of Interference Correction Factors and Preparation of Standard Materials for CHIME Dating (CHIME 연대 측정의 간섭 보정 계수 결정과 표준 물질의 준비를 위한 실험실 표준법)

  • Cho, Deung-Lyong;Kato, Takenori;Suzuki, Kazuhiro
    • Journal of the Korean earth science society
    • /
    • v.27 no.5
    • /
    • pp.521-527
    • /
    • 2006
  • The EPMA analysis for CHIME dating requires standard materials, which include nuclear fuel materials that are rare and sensitive to handle. Any laboratory that does not meet these standards has had difficulties adopting the CHIME dating method. We have developed a working standard technique for CHIME dating to prepare standard materials without use of nuclear fuel materials. Mineral samples, such as small pieces of monazite that are homogeneous in X-ray intensities, are calibrated using well-characterized primary standards in one laboratory. Once this procedure is done, they can be readily usable as working standards in the other laboratories, only with measurement of X-ray intensities. This method is applicable in preparing standard materials for both chemical compositions and determination of X-ray interference correction factors, and it is independent from chemical composition of mineral standard.

CHIME Monazite Ages of Jurassic Foliated Granites in the Vicinity of the Gangjin Area, Korea (강진 인근 쥬라기 엽리상 화강암류의 CHIME 모나자이트 연대측정)

  • Cho, Deung-Lyong;Kee, Weon-Seo;Suzuki, Kazuhiro
    • The Journal of the Petrological Society of Korea
    • /
    • v.16 no.3
    • /
    • pp.101-115
    • /
    • 2007
  • The CHIME (chemical Th-U-total Pb isochron method) dating on monazite was carried out for two foliated granites from a dextral ductile shear zone in the vicinity of Gangjin area, which is considered to be a southern extension of Sunchang shear zone. The result gives emplacement age of the medium-grained biotite granite and the coarse-grained biotite granite as $183.6{\pm}2.2Ma$(MSWD=0.21) and $171.7{\pm}4.0Ma$(MSWD=0.57), respectively. Microtextures of quartz and feldspar observed in the foliated granite are almost identical with those reported in Jurassic (ca 180 Ma) foliated granites from the Imsil-Namwon area of the Sunchang shear zone, and they constraint that the ductile deformation took place at temperature condition of $300{\sim}550^{\circ}C$. Assuming cooling curves of the foliated granites in this study are similar with those of Jurassic foliated granites from Imsil-Namwon area, dextral ductile shear in the Gangjin area would take place between 172 Ma and 150 Ma, about 10 Ma later than the previous estimation based on CHIME monazite ages.

CHIME Zircon Age of the Gamaksan Alkaline Meta-Granitoid in the Northwestern Margin of the Gyeonggi Massif, Korea, and its Tectonic Implications (경기육괴 북서 연변부 감악산 알칼리 변성화강질암의 CHIME 저어콘 연대와 지체구조적 의의)

  • Cho, Deung-Lyong;Lee, Seung-Ryeol;Suzuki, Kazuhiro
    • The Journal of the Petrological Society of Korea
    • /
    • v.16 no.3
    • /
    • pp.180-188
    • /
    • 2007
  • We carried on CHIME zircon age dating for the Gamaksan alkaline meta-granitoid (GAM) from the northwestern margin of the Gyeonggi massif, and obtained a timing of regional metamorphism at $247{\pm}14Ma$ (n=103, MSWD=0.92). The age is compatible with Permo-Triassic regional metamorphic ages from the Imjingang Belt which has been regarded as possible eastward extension of Triassic collisional belt in China. Considering an extensional ductile shearing of the Gyeonggi (Kyonggi) Shear Zone which deformed GAM occurred at 226 Ma with temperature condition about $500^{\circ}C$ (Kim et al., 2000), and the Late Triassic to Early Jurassic Daedong Group unconformably overlies on top of the ductile shear zone, cooling rate of GAM over the period can be estimated as $18{\sim}10^{\circ}C/Ma$. Since new zircon begin to pow at temperature higher than upper-amphibolite facies condition (${\sim}700^{\circ}C$), cooling rate of GAM from peak metamorphism (247 Ma) to deposition of the Daedong G.oup (${\sim}$Early Jurassic) would be higher than $10^{\circ}C/Ma$. Such rapid cooling rate is compatible with that reported from exhumation stage of the Dabie-Sulu Belt, and supports an idea that the Gyeonngi massif is a part of Permo-Triassic orogenic belt in East Asia.

The Hida metamorphic belt developed near the triple junction among the Sino-Korea, Yangtze and Proto-Pacific plates

  • Kunugiza, Keitaro
    • Proceedings of the Mineralogical Society of Korea Conference
    • /
    • 2002.05a
    • /
    • pp.1-3
    • /
    • 2002
  • The eastward extension of the suture zone between the Sino-Korea and Yangtze cratons in the Korean Peninsula and Japanese islands remains debatable (Hiroi, 1981; Cluzel et al., 1991; Yin and Nie, 1993; Sohma and Kunugiza, 1993; Isozaki, 1997; Arakawa et at., 2000), and is related to our understanding of the continent-continent collision orogeny. The collision orogeny varies in tectono-metamorphic processes and the timing differs from place to place, as exemplified by the absence of coesite and micro-diamond in the Korean Peninsula and Japanese islands, because it is a long-lived process of more than several tens of million years from subduction to exhumation in the Wilson cycle, and because the suture zone extends more than several thousand kilometers with a curved shape from the Qinling area of China to the Hida highland area of Japan. Hiroi (1981) is the first paper to correlate the Unazuki metamorphic rocks of the Hida metamorphic belt in Japan with the Ogcheon belt in the Korean Peninsula based on the presence of 240 Ma medium P/T metamorphic rocks in both belts, but there is a lack of recent studies on this correlation. To resolve the correlationship, there are two approaches: 1) petrological studies characterizing the origin and P-T history of rocks and 2) in-situ micro-dating of fine-grained, zoned minerals of zircon, monazite, uraninite and thorite using the EPMA (U-Th-Pb chemical dating or CHIME depending on calibration method) and the SHRIMP (Sensitive High-resolution ion Microprobe) to decipher the timing of geological events. As a first step of these approaches, micro-dating was undertaken to rocks of the Hida metamorphic belt and its Mesozoic cover (Tetori Group) in the Hida highland area, central Japan.

  • PDF

The Age of the Okcheon Metamorphic Belt-How Much Do We Know? (옥천 변성대의 시기-우리는 얼마만큼 알고 있나?)

  • Kwon, Sung-Tack
    • The Journal of the Petrological Society of Korea
    • /
    • v.17 no.2
    • /
    • pp.51-56
    • /
    • 2008
  • The geologic age of the Okcheon metamorphic belt, used to be a longstanding puzzle, has been settled down to Neoproterozoic to Paleozoic with discovery of fossils and isotopic age dating of metavolcanic rocks. As isotopic ages become accumulated, there appeared a controversy over the age of peak metamorphism in the Okcheon metamorphic belt, i.e., a single late Permian-early Triassic metamorphism (CHIME allanite age and U-Pb age of metamorphic zircon), or earlier independent presence of early Permian metamorphism (U-Pb age of allanite within garnet porphyroblast). If we compare the isotopic ages that can represent metamorphism, the data for the latter have much larger error than those of the former with some overlap considering the error limits. It means that, the former, supported by two independent ages, is considered a better representation for the age of metamorphism of the Okcheon metamorphic belt. Therefore, I propose the idea of early Permian metamorphism should better be reserved until conclusive evidence appears. The late Permian-early Triassic metamorphic age suggest that the effect of continental collision influenced much of the middle part of Korean Peninsula, namely, the Imjingang belt, the Gyeonggi massif and the Okcheon belt.

The Development and Originality of Wind Chimes of the Goryeo Dynasty (고려시대 풍탁(風鐸)의 전개와 독창성)

  • Lee, Young-sun
    • Korean Journal of Heritage: History & Science
    • /
    • v.52 no.2
    • /
    • pp.292-307
    • /
    • 2019
  • Buddhists have always tended to adorn and embellish Buddhist statues and their surrounding spaces in order to exhibit the grandeur and sublime nature of the Buddha. The various kinds of splendid instruments and implements used in such ornamentation are collectively called jangeomgu in Korean. Thus, the term jangeomgu encompasses articles used to decorate Buddhist statues, halos, and baldachin, as well as Buddhist banners and wind chimes, which are generally hung outside a building. Wind chimes are still widely used at Buddhist temples. In China, judging from various structures such as the Wooden Stupa of Yongningsi in Luoyang and the Dunhuang Caves, wind chimes began to be used around the sixth century. As for Korea, Buddhism was first introduced from China during the Three Kingdoms Period, and Koreans accordingly began to build Buddhist temples and buildings. It would appear that wind chimes came to be used around the time that the first temples were built. The oldest extant wind chime in Korea is the gilt-bronze wind chime of Baekje, discovered at the Mireuksa Temple Site in Iksan. In general, Korean wind chimes dating from the Three Kingdoms Period are classified into two general types according to their shape and elevation, i.e., those shaped like a Buddhist bell and those shaped like a trapezoid. As these two forms of wind chimes have influenced each other over time, those made during the Goryeo dynasty, having inherited the style, structure, and design of the preceding period, display such features. At the same time, the artisans who produced wind chimes pursued technical development and adopted free, yet not extravagant, designs. In particular, Goryeo wind chimes are characterized by original designs created through exchanges with other Buddhist art forms of the same period, such as the embossed lotus design band of Goryeo bells; the bullmun design, which served to display the grandeur of the royal family; the samhwanmun design, which consisted of decorating the interior of a Goryeo incense burner with three holes; Sanskrit designs; and designs inspired by the windows and doors of stone pagodas. In this way, the production of Goryeo wind chimes developed with a focus on purpose while being free of formal constraints. This study started out from the fact that the largest number of Korean wind chimes were produced during the Goryeo dynasty. Therefore, research on wind chimes should be based on those of the Goryeo dynasty, especially since fewer relevant studies have been conducted compared to studies on other forms of Buddhist art. For the purposes of this study, the reasons for the production of wind chimes will be examined first, followed by an examination of the various styles of Korean wind chimes. Then, based on the findings of this investigation, the development and characteristics of the wind chimes produced during the Goryeo dynasty will be explored for each period.