• 대한물리치료과학회지
• /
• 제7권2호
• /
• pp.597-605
• /
• 2000

There has been several usual ways to cure pain in osteological muscle: use oral medicine or injection, or apply medicine to a sore place. The purpose of this study was to examine, by using thermometer and digital infrared thermographic imaging, how much the permeation of aceclofenac, an anodyne and antiphlogistic, into sore skin brought a change to skin temperature after that was' applied to it. The findings of this study were as below; 1. A cream made of aceclofenac yielded $0.61^{\circ}C$ difference in temperature, but the difference wasn't statistically significant. 2. An aceclofenac to which oleic acid was added went through microemulsion and applied, and there was $0.3^{\circ}C$ change in temperature, the biggest significant difference(P<.05), after approximately 15 minutes passed. 3. An aceclofenac to which labrasol was added went through microemulsion and applied, and there was a growing rise in temperature with the lapse of time. After 30 minutes passed, the final temperature showed $1.25^{\circ}C$ rise, which was a significant change(P<.05). 4. As the temperature was measured by digital infrared thermographic imaging, there was about $3.97^{\circ}C$ fall, the biggest change, which was significant(P<.05). The findings of this study suggested that the application of aceclofenac to sore skin caused a change in skin temperature, as that permeated into it.

• 농업과학연구
• /
• 제41권4호
• /
• pp.481-485
• /
• 2014

According to statistical data the past ten years, cultivation area and yield of radish are steadily decreasing. This phenomenon cause instability of radish's supply due to meteorological chage, even if radish's yield per unit area is increasing by cultivation technological development. These problems raise radish's price. So, we conducted study on meteorological factors for accuracy improvement of radish yield estimation. Panel analysis was used with two-way effect model considering group effect and time effect. As the result, we show that mixed effects model (fixed effect: group, random effects: time) was statistical significance. According to the model, a rise of one degree in the average air temperature on August will decrease radish's yield per unit area by $428kg{\cdot}10a^{-1}$ and that in the average air temperature on October will increase radish's yield per unit area by $438kg{\cdot}10a^{-1}$. The reason is that radish's growth will be easily influenced by meteorological condition of a high temperature on August and by meteorological condition of a low temperature on Octoboer.

• 한국철도학회논문집
• /
• 제13권2호
• /
• pp.179-185
• /
• 2010

장대레일 좌굴과 파단에 대한 안정성을 확보하고 효율적인 유지관리를 위해서는 레일온도의 특징을 파악하는 것이 매우 중요하다. 최근 들어, 기후변화에 의해 여름철 최고 대기온도는 상승하고 겨울철 최저 대기온도는 점점 하강하고 있다. 이러한 현상은 연간 레일온도의 변화량에 영향을 미치게 되고 설정온도와 관리온도의 변화를 일으킬 수 있다. 본 연구에서는 기후 및 온도 측정시스템을 구축하여 기후요소를 포함한 레일온도를 실측하였다. 실측자료의 심층적인 분석을 통하여, 기존 레일온도 추정식은 특정한 조건(기후요소들의 특정 조합) 에서만 적용이 가능함을 알 수 있었다. 현장의 실제 기후요소를 고려한 레일온도를 확률론적 접근으로 예측하는 것이 더욱 합리적일 것이다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.202.2-202.2
• /
• 2013

Ti2O3 is known as a typical Mott insulator with a transition temperature of near $200^{\circ}C$. Unlike VO2, Ti2O3 does not have a structural phase transition near the metal-insulator-transition (MIT) temperature. We investigated the temperature-dependent thermal vibration change using temperature-dependent x-ray absorption fine structure (XAFS) at Ti K-edge in the temperature range of 300~600 K. Ti2O3 powder and films were synthesized using thermal chemical vapor deposition (CVD) at $800{\sim}900^{\circ}C$. X-ray diffraction measurements show a single phased Ti2O3 at room temperature. XAFS confirmed no structural phase transition in the temperature of 300~600 K. A small but distinguishable structural disorder change was observed near the transition temperature. We will discuss the MIT behavior with the change of structural disorder.

• 한국재료학회지
• /
• 제30권6호
• /
• pp.301-307
• /
• 2020

In this study, factors considered to be causes of promotion of densification of sintered pellets identified during phase change are reviewed. As a result, conclusions shown below are obtained for each factor. In order for MA powder to soften, a temperature of 1,000 K or higher is required. In order to confirm the temporary increase in density throughout the sintered pellet, the temperature rise due to heat during phase change was found not to have a significant effect. While examining the thermal expansion using the compressed powder, which stopped densification at a temperature below the MA powder itself, and the phase change temperature, no shrinkage phenomenon contributing to the promotion of densification is observed. The two types of powder made of Ti-silicide through heat treatment are densified only in the high temperature region of 1,000 K or more; it can be estimated that this is the effect of fine grain superplasticity. In the densification of the amorphous powder, the dependence of sintering pressure and the rate of temperature increase are shown. It is thought that the specific densification behavior identified during the phase change of the Ti-37.5 mol.%Si composition MA powder reviewed in this study is the result of the acceleration of the powder deformation by the phase change from non-equilibrium phase to equilibrium phase.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 춘계학술대회 논문집
• /
• pp.65-69
• /
• 2009

Generally Lighting system consists of lamp and luminaire. When a fluorescent lamp is installed in luminaire, power and light output is changed by ambient temperature. Particularly electrodeless lamp depends on the changes that are mercury pressure with amalgam temperature and magnetic properties with ferrite temperature. It has finally influence on optical efficiency. In this study, the temperature change of ferrite and cold spot, vessel are measured at transitional state and then same characteristics are measured with increase of ambient temperature. At transitional state, luminous flux is related to temperature change of cold spot that compare with behavior of mercury pressure and light output. At increase of ambient temperature, we analyzed change that efficiency and electrical, optical characteristics of electrodeless lamp are related to ferrite core and cold spot temperature.

• 한국초등과학교육학회지:초등과학교육
• /
• 제20권1호
• /
• pp.139-147
• /
• 2001

This paper is to study on the change of volume and temperature of the solution which mixed water with ethanol. And its main purpose is to examine closely how the volume changes, and to find the method to maximize the change of the volume. The summaries for results of the study are; First, we were known that water and ethanol are homogeneously mixed. But two solvents does not mix homogeneously by different specific gravity at early stages. Second, we could see that the volume changed large at homogeneous mixed water with ethanol by stirrer, the change of volume is the largest value when water mixed with ethanol in the ratio of one to one. Third, when water mixed with ethanol in the ratio of one to one, the change of temperature is very large by activated hydrogen bond. We conclude that it is the best result when ratio of water and ethanol is one to one and the solution is well mixed.

• 융합신호처리학회논문지
• /
• 제23권4호
• /
• pp.228-233
• /
• 2022

본 연구는 수중 무인 이동체의 장기 운용을 위한 전기 에너지의 생성을 위하여 상변화물질(PCM)을 활용하는 방안에 대한 실험적 연구이다. 상변화물질이 온도에 따라 고체와 액체의 상태로 변하면서 발생하는 부피의 변화가 한정된 공간에서 고압으로 변환되어 이를 통해 유체의 흐름을 만들어 발전하는 방식이다. 상변화물질로 해양의 온도를 고려하여 폴리에틸렌글리콜(Polyethylene glycol)을 사용하였으며, 고체상태인 저온(1℃~2℃)과 액체 상태인 고온(21℃~25℃)에서 부피 변화를 압력으로 변환 시켜주는 전기 에너지 생성 장치를 제작하여 전기 에너지 생성 실험을 수행하였다. 실험 결과, 상(Phase)변화에 따른 압력 변화는 1시간에서 2시간 사이에 급격히 발생하였으며, 4시간 이후에는 약 24MPa 정도의 압력을 유지하였다. 이를 통해 상변화물질과 온도 차를 이용하여 수중 무인 이동체의 전원으로 활용할 수 있음을 확인하였고, 이를 적용하기 위해서는 좀 더 개선된 설계가 이루어져야 함을 알 수 있었다.

• 한국기후변화학회지
• /
• 제6권2호
• /
• pp.61-72
• /
• 2015

In this study, we have investigated monthly changes in temperature extremes in South Korea for the past (1921~2010) and the future (2011~2100). We used seven stations' (Gangneung, Seoul, Incheon, Daegu, Jeonju, Busan, Mokpo) data from KMA (Korea Meteorological Administration) for the past. For the future we used the closest grid point values to observations from the RCP8.5 scenario of 1 km resolution. The Expert Team on Climate Change Detection and Indices (ETCCDI)'s climate extreme indices were employed to quantify the characteristics of temperature extremes change. Temperature extreme indices in summer have increased while those in winter have decreased in the past. The extreme indices are expected to change more rapidly in the future than in the past. The number of frost days (FD) is projected to decrease in the future, and the occurrence period will be shortened by two months at the end of the $21^{st}$ century (2071~2100) compared to the present (1981~2010). The number of hot days (HD) is projected to increase in the future, and the occurrence period is projected to lengthen by two months at the end of the $21^{st}$ century compared to the present. The annual highest temperature and its fluctuation is expected to increase. Accordingly, the heat damage is also expected to increase. The result of this study can be used as an information on damage prevention measures due to temperature extreme events.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2005년도 추계 학술대회논문집
• /
• pp.75-80
• /
• 2005

The present work was undertaken to numerically analyze the defrosting phenomena of windshield glass. In order to analysis the phase change from frost to water on windshield glass by discharging hot air from a defroster nozzle, the flow and the temperature field of the cabin interior, the heat transfer through the windshield glass, and the phase change of frost should be solve simultaneously. In the present work, the flow field was obtained by solving 3-D incompressible Navier-Stokes equations, and the temperature field was computed from the incompressible energy equation. The phase change process was solved by the enthalpy method. For the code validation, the temperature and the phase change of the driven cavity were calculated. The calculation showed a good agreement with other numerical results. Then, the present code was applied to the defrosting problem of a real automobile, and a good agreement with the experimental data was also obtained.