• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.7
• /
• pp.1581-1588
• /
• 2010

Most digital cameras use a single image sensor with Color Filter Array(CFA) for the advantage of costs and speed. The various color interpolation(demosaicing) algorithms are researched to reconstruct a full representation of the image. In this paper, we proposed a method of demosaicing about using weighted directional filter for vertical, horizontal, and diagonal direction edge. The method considered the efficiency of hardware resources for hardware implementation. The performance of proposed method was confirmed by comparing the conventional method in experiments using 24 Kodak test images. The proposed method was designed by Verilog HDL and was verified by using Virtex4 FPGA boards and CMOS Image Sensor.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.10
• /
• pp.59-70
• /
• 2010

Each pixels become got pixel value for color of only one from among colors because of bayer pattern that light receiving device of image sensor which is used in HHP and digital camera writes only one color. Information of the missing pixels could infer perfect color image from using information of neighbor pixels by using CFA(Color Filter Array). In this paper, we derive relation between the average of the data from the light receiving device of image sensor and each color channel data. And by using this relation, a new efficient edge color fuzzy method for color interpolation is proposed. Also, missing luminance signal channel interpolation was fuzzy interpolation along any edges direction for reducing color noise and interpolating efficiently it. And in this paper, the proposed method has been proved improving average 2.4dB than the conventional method by using PSNR. Also, resolution of the image of the proposed method was similar to the original image by visual images, we has been verified to be decreased a chromatic aberration than image of conventional algorithms with simulation result.

• International Journal of Internet, Broadcasting and Communication
• /
• v.15 no.4
• /
• pp.74-83
• /
• 2023

In this paper, we propose an image compression scheme which uses a demosaicking network and a channel-wise decoder in the decoding network. For the demosaicing network, we use as the input a colored mosaiced pattern rather than the well-known Bayer pattern. The use of a colored mosaiced pattern results in the mosaiced image containing a greater amount of information pertaining to the original image. Therefore, it contributes to result in a better color reconstruction. The channel-wise decoder is composed of multiple decoders where each decoder is responsible for each channel in the color image, i.e., the R, G, and B channels. The encoder and decoder are both implemented by wavelet based auto-encoders for better performance. Experimental results verify that the separated channel-wise decoders and the colored mosaic pattern produce a better reconstructed color image than a single decoder. When combining the colored CFA with the multi-decoder, the PSNR metric exhibits an increase of over 2dB for three-times compression and approximately 0.6dB for twelve-times compression compared to the Bayer CFA with a single decoder. Therefore, the compression rate is also increased with the proposed method than with the method using a single decoder on the Bayer patterned mosaic image.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.4
• /
• pp.68-74
• /
• 2017

This paper presents a joint demosaicking and arbitrary-ratio down sampling algorithm for color filter array (CFA) images. Color demosaiking is a necessary part of image signal processing pipeline for many types of digital image recording system using single sensor. Also, such as smart phone, obtained high resolution image from image sensor has to be down-sampled to be displayed on the screen. The conventional solution is "Demosaicking first and down sampling later". However, this scheme requires a significant amount of memory and computational cost. Also, artifacts can be introduced or details get damaged during demosaicking and down sampling process. In this paper, we propose a method in which demosaicking and down sampling are working simultaneously. We use inverse mapping of Bayer CFA and then joint demosaicking and down sampling with arbitrary-ratio scheme based on signal decomposition of high and low frequency component in input data. Experimental results show that our proposed algorithm has better image quality performance and much less computational cost than those of conventional solution.

• Journal of Korean Elementary Science Education
• /
• v.40 no.3
• /
• pp.366-389
• /
• 2021

The purpose of this study is to extract the factors that compose the image of science teacher desired by elementary school students in inquiry-based instruction and analyze the structural associations between them. Factors that compose the image of science teacher desired by elementary school students in inquiry-based instruction were extracted through exploratory factor analysis (EFA). Based on the findings of EFA, the questionnaire has been further analyzed using confirmatory factor analysis (CFA). In addition, based on the factor structure identified through factor analysis, we comprehensively analyzed the image of science teacher desired by elementary school students in inquiry-based instruction. As a result of EFA, five factors were identified which compose the image of science teacher desired by elementary school students in inquiry-based instruction: namely, teaching strategy, assessment strategy, prior guidance, understanding students, learning development. The CFA results showed a relatively strong correlation between teaching strategy and learning development, teaching strategy and understanding students. As a result of a comprehensive review of students' perception of the image of science teachers in inquiry-based instruction based on the extracted factor structure, students perceived that it is important for science teachers to run inquiry-based instruction by reflecting their understanding of students. Students also perceived importantly that science teachers run inquiry-based instruction using effective teaching strategies and proper evaluation strategies.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.45 no.3
• /
• pp.46-54
• /
• 2008

Most commercial CCD/CMOS image sensors have CFA(Color Filter Array) where each pixel gathers light of a selective color to reduce the sensor size and cost. There are many algorithms proposed to reconstruct the original clolr image by adopting pettern recognition of regularization methods to name a few. However the resulting image still suffer from errors such as flase color, zipper effect. In this paper we propose an adaptive edge weight demosaicking algorithm that is based on POCS(Projection Onto Convex Sets) not only to improve the entire image's PSNR but also to reduce the edge region's errors that affect subjective image quality. As a result, the proposed algorithm reconstruct better quality images especially at the edge region.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2009.01a
• /
• pp.838-841
• /
• 2009

This paper proposes a novel lossless coding scheme for Bayer color filter array (CFA) images which are generally used as internal data of color digital cameras having a single image sensor. The scheme employs a block-adaptive prediction method to exploit spatial and spectral correlations in local areas containing different color signals. In order to allow adaptive prediction suitable for the respective color signals, four kinds of linear predictors which correspond to 2 ${\times}$ 2 samples of Bayer CFA are simultaneously switched block-by-block. Experimental results show that the proposed scheme outperforms other state-of-the-art lossless coding schemes in terms of coding efficiency for Bayer CFA images.

• Journal of Microbiology and Biotechnology
• /
• v.16 no.3
• /
• pp.399-407
• /
• 2006

In this study, an electrical conductive carbon fiber was used as a biofilter matrix to electrochemically improve the biofilter function. A bioreactor system was composed of carbon fiber (anode), titanium ring, porcelain ring, inorganic nutrient reservoir, and VOC reservoir. Electric DC power of 1.5 volt was charged to the carbon fiber anode (CFA) to induce the electrochemical oxidation potential on the biofilter matrix, but not to the carbon fiber (CF). We tested the effects of electrochemical oxidation potential charged to the CFA on the biofilm structure, the bacterial growth, and the activity for metabolic oxidation of VOCs to $CO_2$, According to the SEM image, the biofilm structure developed in the CFA appeared to be greatly different from that in the CF. The bacterial growth, VOCs degradation, and metabolic oxidation of VOCs to $CO_2$ in the CFA were more activated than those in the CF. On the basis of these results, we propose that the biofilm structure can be improved, and the bacterial growth and the bacterial oxidation activity of VOCs can be activated by the electrochemical oxidation potential charged to a biofilter matrix.

• Journal of Broadcast Engineering
• /
• v.14 no.6
• /
• pp.742-748
• /
• 2009

Most commercial digital still cameras use a single sensor array (e.g., CMOS or CCD) with color filter array (CFA) to reduce the cost and size. Since the image obtained with CFA has only one color value per pixel, the demosaicing is needed to acquire missing two color values. Although many demosaicing methods have been proposed, they still have artifacts such as rainbow and zippering artifact. In this paper, we propose the simple demosaicing algorithm using tendency of neighbor pixels with the enhanced weighting function. In the experimental results, our algorithm shows much better subjective qualities of the images than conventional demosaicing algorithm and improves objective qualities.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.189-192
• /
• 2009

This paper presents comparison and analysis of various CFA patterns which are used in single sensor digital camera. There are several patterns which are already used, however, images are sometimes darker or brighter than what human see in real life. Also, images show some noise and blurring. To overcome this problems, many studies on the patterns have been discussed. We carry out experiment with seven patterns including the Bayer pattern. The bilinear method is selected for a interpolation method. The experimental result indicates that image quality is not affected by individual patterns and each pattern requires its own interpolation method.