• 제목/요약/키워드: CF4/O2

검색결과 273건 처리시간 0.027초

반응성 이온 식각에 의해 손상된 실리콘의 세정에 관한 연구 (A study on cleaning process of RIE damaged silicon)

  • 이은구;이재갑;김재정
    • E2M - 전기 전자와 첨단 소재
    • /
    • 제7권4호
    • /
    • pp.294-299
    • /
    • 1994
  • CHF$_{3}$/CH$_{4}$Ar 플라즈마에 의해 형성된 산화막 식각 잔류물의 화학구조와 이 잔류물의 제거를 위한 세정방법을 x-ray photoelectron spectroscopy를 이용하여 조사하였다. 잔류무르이 구조는 CF$_{x}$-polymer와 Si-C, Si-O 결합으로 이루어진 SiO$_{y}$ C$_{z}$ 이었다. CF$_{4}$O$_{2}$ 플라즈마에 의한 silicon light etch는 산화막 식각 잔류물인 SiO$_{y}$ C$_{z}$ 층과 손상된 실리콘 표면을 제거하엿으며 NH$_{4}$OH-H$_{2}$O$_{2}$과 HF용액으로 완전히 제거되는 CF$_{x}$-polymer/SiO$_{x}$층을 남겼다. 100.angs.정도의 silicon light etch는 minority carrier life time과 thermal wave signal값을 초기 웨이퍼 수준까지 회복시켰으며 접합누설 전류도 거의 습식 식각 공정수준까지 감소시켰다.

  • PDF

Cl2/CF4 플라즈마에 Ar, O2 첨가에 따른 PZT 박막의 식각 손상 개선 효과 (Reduce of Etching Damage of PZT Thin Firms with Addition of Ar and O2 in Cl2/CF4 Plasma)

  • 강명구;김경태;김창일
    • 한국전기전자재료학회논문지
    • /
    • 제15권4호
    • /
    • pp.319-324
    • /
    • 2002
  • In this study, the reduce of plasma etching damage in PZT thin film with addictive gas and re-annealing after etching have been investigated. The PZT thin films were etched as a function of $Cl_2/CF_4$ with addition of Ar and $O_2$ with inductively coupled plasma. The etch rates of PZT thin films were 1450 ${\AA}/min$ at 30% additive Ar and 1100 ${\AA}/min$ at 10% auditive $O_2$ into $Cl_2/CF_4$ gas mixing ratio of 8/2. In order to reduce plasma damage of PZT thin films after etching, the etched PZT thin films were re-annealed at various temperatures at $O_2$ atmosphere. From the hysteresis curries, the ferroelectric properties are improved by $O_2$ re-annealing process. The improvement of ferroelectric behavior at annealed PZT films is consistent wish the increase of the (100) and (200) PZT peaks revealed by x-ray diffraction (XRD). From x ray photoelectron spectroscopy (XPS) analysis, the intensity of Pb-O, Zr-O and Ti-O peak are increased and the chemical residue peak is reduced by $O_2$ re-annealing. The ferroelectric behavior consistent with the dielectric nature of $Ti_xO_y$ is recovered by $O_2$ recombination during rapid thermal annealing process.

실리콘 트렌치 식각 특성에 미치는 $He-O_2,\; SiF_4$첨가 가스의 영향 (Characteristics of silicon etching related to $He-O_2,\; SiF_4$for trench formation)

  • 김상기;이주욱;김종대;구진근;남기수
    • 한국진공학회지
    • /
    • 제6권4호
    • /
    • pp.364-371
    • /
    • 1997
  • MERIE 플라즈마 장비를 사용하여 실리콘의 트렌치 식각을 HBr, He-$O_2,SiF_4,CF_4$ 등의 가스를 주입하여 수행하였으며 식각 속도, 식각 프로파일 변화, 잔류물 생성 및 표면 상태 등을 관찰하였다. HBr만을 이용한 플라즈마 식각시에는 트렌치 하부 영역에 상당한 횡방향 식각이 일어나 항아리 모양의 식각 프로파일이 관찰되었으며, HBr에 He-$O_2$가스와 $SiF_4$$CF_4$등의 주입량을 변화시켜 벽면 기울기와 횡방향 식각의 정도를 제어할 수 있었다. 표면 잔류물 특성 및 표면 거칠기(roughness)등은 HBr/He-$O_2$/$SiF_4$가스를 동시에 주입하여 식각하였을 때 가장 양호한 식각 특성을 나타내었으며, 첨가 가스로 $SiF_4$를 이용함으로써 기존의 C-F계 플라즈마를 이용한 트렌치 식각 특성들보다 우수한 공정 결과를 얻었다. 또 한 $SiF_4$를 이용함으로써 $CF_4$ 첨가시보다 C의 잔류물을 크게 줄이고 표면 손상을 개선할 수 잇음을 X-선 광전자 분석과 주사전자현미경(scanning electron microscopy) 및 AFM(atomic force microscopy)의 결과로써 확인하였다.

  • PDF

Cl2CF4/Ar 유도결합 플라즈마에 의해 식각된 SBT 박막의 표면 손상 (The Surface Damage of SBT Thin Film Etched in Cl2CF4/Ar Plasma)

  • 김동표;김창일;이철인;김태형;이원재;유병곤
    • 한국전기전자재료학회논문지
    • /
    • 제15권7호
    • /
    • pp.570-575
    • /
    • 2002
  • $SrBi_2Ta_2O_9$ thin films were etched in $Cl_2/CF_4/Ar$ inductively coupled plasma (ICP). The maximum etch rate was 1300 ${\AA}/min$ at 900 W ICP power in Cl$_2$(20%)/$CF_4$(20%)/Ar(60%). As RF source power increased, radicals (F, Cl) and ion ($Ar^+$) increased. The influence of plasma induced damage during etching process was investigated in terms of P-E hysteresis loops, chemical states on the surface, surface morphology and phase of X-ray diffraction. The chemical states on the etched surface were investigated with X-ray spectroscopy and secondary ion mass spectrometry. After annealing $700^{\circ}C$ for 1 h in $O_2$ atmosphere, the decreased P-E hysteresises of the etched SBT thin films in Ar and $Cl_2/CF_4/Ar$ plasma were recovered.

$Ar/Cl_{2}/CF_{4}$ 코밀도 플라즈마를 이용한 강유전체 $YMnO_3$의 건식식각 특성연구 (Dry Etch Characteristic of Ferroelectric $YMnO_3$ Thin Films Using High Density $Ar/Cl_{2}/CF_{4}$ $PAr/Cl_{2}/CF_{4}$)

  • 박재화;김창일;장의구;이철인;이병기
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2001년도 추계학술대회 논문집
    • /
    • pp.213-216
    • /
    • 2001
  • Etching behaviors of ferroelectric YMn $O_3$ thin films were studied by an inductively coupled plasma (ICP). Etch characteristic on ferroelectric YMn $O_3$ thin film have been investigated in terms of etch rate, selectivity and etch profile. The maximum etch rate of YMn $O_3$ thin film is 300 $\AA$/min at Ar/C $l_2$ of 2/8, RF power of 800W, dc bias voltage of 200V, chamber pressure of 15mTorr and substrate temperature of 3$0^{\circ}C$. Addition of C $F_4$ gas decrease the etch rate of YMn $O_3$ thin film. From the results of XPS analysis, Y $F_{X}$ compunds were found on the surface of YMn $O_3$ thin film which is etched in Ar/C1/C $F_4$ plasma. The etch profile of YMn $O_3$ film is improved by addition of C $F_4$ gas into the Ar/C $l_2$ plasma. These results suggest that fluoride yttrium acts as a sidewall passivants which reduce the sticking coefficient of chlorine on YMn $O_3$.>.

  • PDF

Ar/CF4 유도결합 플라즈마를 이용한 (Ba0.6Sr0.4)TiO3 박막의 식각 특성 (The Etching Characteristics of (Ba0.6Sr0.4)TiO3 films Using Ar/CF4 Inductively Coupled Plasma)

  • 강필승;김경태;김동표;김창일;이수재
    • 한국전기전자재료학회논문지
    • /
    • 제15권11호
    • /
    • pp.933-938
    • /
    • 2002
  • (Ba,Sr)TiO$_{4}$ (BST) thin films on Pt/Ti/SiO$_{2}$/Si substrates were deposited by a sol-gel method and the etch characteristics of BST thin films have been investigated as a function of gas mixing ratio. The maximum etch rate of the BST films was 440 $AA$/min under such conditions as: CF$_{4}$(CF$_{4}$+Ar) of 0.2, RF-power of 700 W, DC-bias voltage of -200 V, pressure of 15 mTorr and substrate temperature of 30 $^{circ}C$. The selectivities of BST to Pt, SiO$_{2}$ and PR were 0.38, 0.25 and 0.09, respectively. In the XPS (X-ray photoelectron spectroscopy) analysis, Barium (Ba) and Strontium (Sr) component in BST thin films formed low volatile compounds such as BaFx, SrFx, which are forms by the chemical reaction with F atoms and is removed by Ar ion bombardment. Titanium (Ti) is removed by chemical reaction such as TiF with ease. The result of secondary ion mass spectrometry (SIMS) analysis confirmed the existence of the BaFx, SrFK, TiFx.

$CF_4$ 첨가에 따른 polyimide 박막의 패터닝 연구 (The Patterning of Polyimide Thin Films for the Additive $CF_4$ gas)

  • 강필승;김창일;김상기
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2001년도 추계학술대회 논문집 Vol.14 No.1
    • /
    • pp.209-212
    • /
    • 2001
  • Polyimide(PI) films have been considered as the interlayer dielectric materials due to low dielectric constant, low water absorption, high gap-fill and planarization capability. The PI mm Was etched with using inductively coupled plasma (ICP). The etching characteristics such as etch rate and selectivity were evaluated to gas mixing ratio. High etch rate was $8300{\AA}/min$ and vertical profile was approximately acquired $90^{\circ}$ at $CF_{4}/(CF_{4}+O_{2})$ of 0.2. The selectivies of polyimide to PR and $SiO_{2}$ were 1.2, 5.9, respectively. The etching profiles of PI films with an aluminum pattern were measured by a scanning electron microscope (SEM). The chemical states on the PI film surface were investigated by x-ray photoelectron spectroscopy (XPS). Radical densities of oxygen and fluorine in different gas mixing ratio of $O_{2}/CF_{4}$ were investigated by optical emission spectrometer (OES).

  • PDF

설사 자돈에서 분리된 병원성 대장균에 관한 연구 (Studies on enterotoxigenic Escherchia coli isolated from piglets with diarrhea)

  • 김광재;윤교복;최봉출;신은경;김종술;박양주;이유섭
    • 한국동물위생학회지
    • /
    • 제20권4호
    • /
    • pp.359-370
    • /
    • 1997
  • This study was carried out to Investigate the biochemical characteristics, antibiotic susceptibility, serogroups and pili producibility test of enterotoxigenic Escherichia coli(ETEC) isolated from piglets with diarrhea in Kangwon province from March to October 1996. 1. Sixty eight E coli strains were isolated from 72 piglets with diarrhea and the biochemical and cultural reaction were compared with the classification criteria of Edwards and Ewing. 2. The serogroups of 26 isolates were classified as 08 : K87 6(8.8%), O20 : K1O1 4(5.9%), O141 : K85 4(5.9%), 09 : K103 : P987 3(4.4%), O45 : K 2(2.9%) 0139 : K82 2(2.9%), O64 : $K^{-}$2(2.9%), O149 : K91 1(1.5%), O157 : K88ac 1(1.5%) and O115 : $K^{-}$1(1.5%), respectively. 3. In antibiotic susceptibility test, the isolates showed high susceptible to Ak, Eno, Na, Gm, Am and Km, whereas resistance to Tc, Sm and Cf. 4. Sixty one strains(89.7%) of 68 I coli Isolates were resistant to one or more drugs. The isolates resistant to 2 and 3 or more drugs were 60.3% and 19.1%, respectively. Amog the 16 multiple resistant patterns, Sm Tc(11.5% ), Cf Sm Tc(11.5% ), Cf Cp Sm Su Tc(9.8% ) and Cf Cp Sm Su Tc(8.2%) patterns were frequently observed. 5. MRHA of guinea pig erythrocytes was detected in 9 out of 26 OK serotype and 9 out of 42 unidentified serotypes. MRHA titers of serotypes showed from 16 to 32 in O141 : K85 and no titers in O139 : K82. 6. By the GM1 ganglioside ELISA, $\beta$-, $\alpha$-, and $\gamma$-hemolysin producing strains was detected as 36, 6, and 5 from heat labile enterotoxin(LT) of 47 ETEC, respectively. The distribution of LT toxin from 112 isolates was showed $\beta$- hemolysin, 2 isolates $\alpha$-hemolysin and 3 isolates $\gamma$-hemol-ysin from 26 OK serotypes.

  • PDF