• Journal of Pharmacopuncture
• /
• v.7 no.1 s.12
• /
• pp.63-69
• /
• 2004

Objective : This study was designed to find out whether NS(normal saline) is able to be constituted as an appropriate control group for CC(Cervi Cornu Parvum herbal acupuncture), CF(Carthami-Flos herbal acupuncture) and BV(bee venom herbal acupuncture). Method : NS and three herbal acupuncture were inserted into Quchi(LI 11) of the subjects. After 5 minutes the subjects completed a questionnaire rating the intensity of 21 kinds of acupuncture sensation; hurting, penetrating, sharp, aching, intense, spreading, radiating, tingling, pricking, stinging, pulling, heavy, dull, numb, electric, shocking, hot, burning, cool, pulsing, and throbbing. We compared subjective evaluations of acupuncture sensation between or among the groups. Results : As for CC half items of the acupuncture sensation were significantly different from NS. As for CF all items were not significantly different from NS. As for CC all items were significantly different from NS except one item. In general the score of CF acupuncture sensation was lower than the others and the score of BV acupuncture sensation was higher than the others from comparison of sensation among herbal acupunctures(CC, CF, BV). Conclusion : We found that NS is able to be an appropriate placebo herbal acupuncture for CF. Further study is needed for new placebo herbal acupuncture for CC and BV.

• Journal of Korean Society on Water Environment
• /
• v.27 no.1
• /
• pp.98-103
• /
• 2011

Photocatalysis using UV light and catalysts is an attractive low temperature and non-energy- intensive method for remediation of a wide range of chemical contaminants like chloroform (CF). Recently development of environmental friendly and sustainable catalytic systems is needed before such catalysts can be routinely applied to large-scale remediation or drinking water treatment. Titanium dioxide is a candidate material, since it is stable, highly reactive, and inexpensive. Diatoms are photosynthetic, single-celled algae that make a microscale silica shell with nano scale features. These diatoms have an ability to biologically fabricate $TiO_2$ nanoparticles into this shell in a process that parallels nanoscale silica mineralization. We cultivated diatoms, metabolically deposited titanium into the shell by using a two-stage photobioreactor and used this biogenic $TiO_2$ to this study. In this study we evaluated how effectively biogenic $TiO_2$ nanoparticles transform CF compared with chemically-synthesized $TiO_2$ nanoparticlesthe and effect of pretreatment of diatom-produced $TiO_2$ nanoparticles on photocatalytic transformation of CF. The rate of CF transformation by diatom-$TiO_2$ particles is a factor of 3 slower than chemically-synthesized one and chloride ion production was also co-related with CF transformation, and 79~91% of CF mineralization was observed in two $TiO_2$ particles. And the period of sonication and mass transfer due to particle size, evaluated by difference of oxygen tention does not affect on the CF transformation. Based on the XRD analysis we conclude that slower CF transformation by diatom-$TiO_2$ might be due to incomplete annealing to the anatase form.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.91-91
• /
• 2010

본 논문은 펄스 직류전원 (Pulse DC) 플라즈마 소스와 반응성 가스인 $CF_4$와 불활성 가스인 Ar를 혼합하여 산업에서 널리 사용되는 유기고분자인 Polymethylmethacrylate (PMMA), Polyethylene terephthalate (PET), 그리고 Polycarbonate (PC) 샘플을 건식 식각한 결과에 대한 것이다. 각각의 샘플은 감광제 도포 후에 자외선을 조사하는 포토레지스트 방법으로 마스크를 만들었다. 펄스 직류전원 플라즈마 시스템을 사용하면 다양한 변수를 줄 수 있다는 장점이 있다. 공정 변수는 Pulse DC Voltage는 300 - 500 V, Pulse DC reverse time $0.5{\sim}2.0\;{\mu}s$, Pulse DC Frequency 100~250 kHz 이었다. 변수 각각의 값이 높아질수록 고분자의 식각률이 높아졌다. 특히, PMMA의 식각률이 가장 높았으며 PET, PC 순이었다. 샘플 중 PC의 식각률이 가장 낮은 이유는 고분자 결합 중에 이중결합의 벤젠 고리 모양을 포함하고 있어 분자 결합력이 비교적 높기 때문으로 사료된다. 기계적 펌프만을 사용한 공정 전 압력은 30 mTorr이었다. 쓰로틀 밸브를 완전 개방한 상태에서 식각 공정 중 진공 압력은 $CF_4$ 가스유량이 늘어날수록 증가하였다. 식각률 역시 $CF_4$ 가스유량(총 가스 유량은 10 sccm)이 많을수록 증가함을 보여주었다 (PMMA: 10 sccm $CF_4$에서 330 nm/min, 3.5 sccm $CF_4$/6.5 sccm Ar에서 260 nm/min., PET: 10 sccm $CF_4$에서 260 nm/min, 3.5 sccm $CF_4$/6.5 sccm Ar에서 210 nm., PC: 10 sccm $CF_4$에서 230 nm, 3.5 sccm $CF_4c$/6.5 sccm Ar에서 160 nm). 이는 펄스 직류전원 플라즈마 식각에서 $CF_4$와 Ar의 가스 혼합비를 조절함으로서 고분자 소재의 식각률을 적절히 변화시킬 수 있다는 것을 의미한다. 표면 거칠기는 실험 후 표면단차 측정기와 전자 현미경 등을 이용하여 식각한 샘플의 표면을 측정하여 알 수 있었다. 실험전 기준 샘플 표면 거칠기는 PMMA는 1.53nm, PET는 3.1nm, PC는 1.54nm 이었다. 식각된 샘플들의 표면 거칠기는 PMMA는 3.59~10.59 nm, PET은 5.13~11.32 nm, PC는 1.52~3.14 nm 범위였다. 광학 발광 분석기 (Optical emission spectroscopy)를 이용하여 식각 공정 중 플라즈마 발광특성을 분석한 결과, 탄소 원자 픽 (424.662 nm)과 아르곤 원자 픽 (751.465 nm, 763.510 nm)의 픽의 존재를 확인하였다. 이 때 탄소 픽은 $CF_4$ 가스에서 발생하였을 것으로 추측한다. 본 발표를 통해 펄스 직류전원 $CF_4$/Ar의 고분자 식각 결과에 대해 보고할 것이다.

• Macromolecular Research
• /
• v.8 no.1
• /
• pp.6-11
• /
• 2000

In this study, we examined the charging behavior of chopped carbon fibers during electro-flocking process, which is one of the key processes of the novel technique for fabricating conductive polymer composite films. Short carbon fibers (CF) during electroflocking were electrically charged by the combined effect of contact charging, corona charging and tribocharging. The specific charge built on CF surface was measured by using Faraday cup method. Specific charge increased not only with increasing electric field strength and potential impressed to mesh electrode as expected from theoretical considerations in literature, but with decreasing mesh opening size due to the improved contact charging condition. However, CF length was found unexpectedly to influence the amount of CF specific charge due to the agglomerated nature of CF flocks leading to the change in charging conditions.

• Carbon letters
• /
• v.26
• /
• pp.11-17
• /
• 2018

Milled carbon fiber (mCF) was prepared by a ball milling process, and X-ray diffraction (XRD) diffractograms were obtained by a $2{\theta}$ continuous scanning analysis to study mCF crystallinity as a function of milling time. The raw material for the mCF was polyacrylonitrile-based carbon fiber (T700). As the milling time increased, the mean particle size of the mCF consistently decreased, reaching $1.826{\mu}m$ at a milling time of 18 h. The XRD analysis showed that, as the milling time increased, the fraction of the crystalline carbon decreased, while the fraction of the amorphous carbon increased. The (002) peak became asymmetric before and after milling as the left side of the peak showed an increasingly gentle slope. For analysis, the asymmetric (002) peak was deconvoluted into two peaks, less-developed crystalline carbon (LDCC) and more-developed crystalline carbon. In both peaks, Lc decreased and $d_{002}$ increased, but no significant change was observed after 6 h of milling time. In addition, the fraction of LDCC increased. As the milling continued, the mCF became more amorphous, possibly due to damage to the crystal lattices by the milling.

• Clean Technology
• /
• v.20 no.1
• /
• pp.22-27
• /
• 2014

Under low pressures of $CF_4$ and $C_2F_6$ up to 20.7 kPa, the equilibrium adsorbed quantity on activated carbon was experimentally examined using the volumetric method at various temperatures between 293.15 K and 333.15 K. To give the best fit to the experimental data curve, the two step model (i.e., Langmuir model for the first layer adsorption and then Freundlich physisorption) is suggested. The method of initial slope yielded the enthalpy of adsorption for the first step while we could apply the Clausius-Clapeyron equation to find the heat of adsorption of the second step. They are 25.9 kJ/mol and 11.8 kJ/mol, respectively, with $CF_4$, and 38.7 and 38.2 kJ/mol with $C_2F_6$.

• Weed & Turfgrass Science
• /
• v.6 no.3
• /
• pp.235-248
• /
• 2017

This study was initiated to investigate seed germinating vigor, germination speed, and establishment characteristics of Festuca species under natural conditions ($5-25^{\circ}C$). Germination rate was 62.0% in CRF 'Audubon' to 97.0% in TF 'Olympic Gold'. It was greater with TF over fine-type fescues, being TF>SF>CF, HF>CRF. The germination speed, measured as days to seed germination of 50% through 80%, was fastest with TF, medium to high with CF, medium with HF and SF, and slowest with CRF. However, it was approximately 4 days slower under natural conditions, as compared with that under alternative conditions ($15-25^{\circ}C$). Germination peak time was much faster with TF. It ranged from 0.73 to 1.84 days with TF, being 1.45 days in average. But it varied with 2.16 to 11.75 days among fine-type species. The peak time was longer in order of SFCF>SF>HF>CRF.

• Applied Chemistry for Engineering
• /
• v.32 no.3
• /
• pp.283-289
• /
• 2021

Adsorption characteristics of carbol fuchsin (CF) dye by coal-based activated carbon (CAC) were investigated using pH, initial concentration, temperature and contact time as adsorption variables. CF dissociates in water to have a cation, NH₂⁺, which is bonded to the negatively charged surface of the activated carbon in the basic region by electrostatic attraction. Under the optimum condition of pH 11, 96.6% of the initial concentration was adsorbed. Isothermal adsorption behavior was analyzed using Langmuir, Freundlich, Temkin and Dubinin-Radushkevich models. Langmuir's equation was the best fit for the experimental results. Therefore, the adsorption mechanism was expected to be adsorbed as a monolayer on the surface of activated carbon with a uniform energy distribution. From the evaluated Langmuir's dimensionless separation coefficients (R_L = 0.503~0.672), it was found that CF can be effectively treated by activated carbon. The adsorption energies determined by Temkin and Dubinin-Radushkevich models were E = 15.31~7.12 J/mol and B = 0.223~0.365 kJ/mol, respectively. Therefore, the adsorption process was physical (E < 20 J/mol, B < 8 kJ/mol). The experimental result of adsorption kinetics fit better the pseudo second order model. In the adsorption reaction of CF dye to CAC, the negative free energy change increased as the temperature increased. It was found that the spontaneity also increased with increasing temperature. The positive enthalpy change (40.09 kJ/mol) indicated an endothermic reaction.

• Korean Journal of Soil Science and Fertilizer
• /
• v.43 no.3
• /
• pp.341-348
• /
• 2010

To investigate the effect of continual pre-plant application of liquid pig manure (LPM) on malting barley growth, quality and soil environment in double cropping system of rice and malting barley, the liquid pig manure was applied after harvesting rice and malting barley for 3 years. Field experiment was designed with non-fertilizer, chemical fertilizer (CF) recommended by soil testing, rice (LPM 50%+CF 50%)+malting barley (CF 100%), rice (LPM 50%+CF 50%)+malting barley (LPM 50%+CF 50%), rice (LPM 100%)+malting barley (CF 100%) and rice (LPM 100%)+malting barley (LPM 100%). By continuous application of LPM 100%, the contents of available $P_2O_5$ and exchangeable K in the soil were increased. The available $P_2O_5$ increased from 243 to 350 mg $kg^{-1}$ and exchangeable K was changed 0.31 to 0.44 $cmol_{c}\;kg^{-1}$. However, the contents of available $P_2O_5$ and exchangeable K were not significant changes in rice (LPM 50%+CF 50%)+malting barley (LPM 50%+CF 50%) plot. Bulk density of soil was not affected by application of LPM. The microbial density was high in order of bacteria > actinomycetes > fungi. The population of aerobic bacteria in rice (LPM 100%)+malting barley (LPM 100%) plot was higher than other plots. The ratio of aerobic bacteria/fungi and biomass C content were the highest in rice (LPM 100%)+malting barley (LPM 100%) plot. The yield of malting barley was increased 22% by increasing culm length, panicle length, No. of panicle and 1,000 grains as 358 kg $10a^{-1}$ in rice (LPM 100%)+malting barley (LPM 100%) plot compared with 294 kg $10a^{-1}$ in rice (CF 100%)+malting barley (CF 100%) plot. The content of ${\beta}$-glucan was low by 4.5 and 4.4% in non-fertilizer and rice (CF 100%)+malting barley (CF 100%) plot, respectively. The content of crude protein was the lowest by 8.2% in non-fertilizer and rice (CF 100%)+malting barley (CF 100%) plot and the quality of malting barley was good as within 11%.

• Proceedings of the Korea Contents Association Conference
• /
• 2010.05a
• /
• pp.91-94
• /
• 2010

본 논문은 국내 TV광고의 품목별 키네틱 타이포그래피 활용에 대하여 2009년 11월 기준 품목별 베스트 50위 내의 광고를 중심으로 총 388개의 광고를 비교, 분석 및 대조하여 각 품목별 키네틱 타이포그래피가 현재 어떠한 형태로 활용되고 있는지를 분석하였고, 결과적으로 품목별 키네틱 타이포그래피 활용에 대한 특징을 도출할 수 있었다.