• Journal of Biomedical Engineering Research
• /
• v.17 no.3
• /
• pp.327-336
• /
• 1996

This study was performed to investigate the effec% of immersion in water and thermal cycling on the mechanical peoperties of light cured restorative composite resins. Five commerically available light-cured composite resins(Photo Clearfil A : CA, Lite-Fil A . LF, Clearril Photo Posterior CP, Prisms AP.H.. PA, 2100 : ZH) were unto The specimens of 12 m in diameter and 0.7 m in thickness were made, and an immersion in $37^{\circ}C$ water for 7 days and a thermal cycling of 1000 cycles at 15 second dwell time each in $5^{\circ}C$ and $55^{\circ}C$ baths were performed. Biaxial flexure test was conducted using the ball-on-three-ball method at the crosshead speed of 0.5mm/min. In order to investigate the deterioration of composite resins during the thermal cycling test, Weibull analysis for the biaxial flexure strengths was done. Fracture surfaces and the surfaces before and after the thermal cycling test were examined by SEM. The highest Weibull modulus value of 10.09 after thermal cycling tests which means the lowest strength variation, was observed in the CP group, and the lowest value of 4.47 was obsered in the LF Group. Biaxial flexure strengths and Knoop hardness numbers significantly decreased due to the thermal cycling ($\textit{p}$< 0.01), however, they recovered when specimens were drie4 The highest biaxial flexure strength of 125.65MPa was observed in the ZH group after the thermal cycling test, and the lowest value of 64.86MPa was observed in the CA group. Biaxial flexure strengths of ZH and CP groups were higher than those of PA, CF, and CA groups after thermal cycling test($\textit{p}$< 0.05). Knoop hardness numbers of CP group after the thermal cycling test was the highest(95.47 $\pm$ 7.35kg/$mm^2$) among the samples, while that of CA group was the lowest(30.73 $\pm$ 2.58kg/$mm^2$). Knoop hardness numbers showed the significant differences between the CP group and others after the thermal cycling test(($\textit{p}$< 0.05). Fracture surfaces showed that the composite resin failure developed along the matrix resin and the filler/resin interface region, and the cracks propagated in the conical shape from the maximum tensile stress zone.

• Korean Journal of Ichthyology
• /
• v.20 no.1
• /
• pp.13-20
• /
• 2008

Internal and external reproductive parameters of the striped bitterling, Acheilognathus yamatsutae were compared. Internal reproductive parameters was used gonadosomatic index (GSI), hepatosomatic index (HSI) and gonadal development stage. External reproductive parameters was used ovipositor in female and pearl organ, dorsal and caudal fin nuptial color in male. The GSI and HSI of the female and male showed highest in February. Gonadal development was observed mainly ripe and spawning/spent stage in February to May. The ovipositor length index (OLI) of the female showed highest in March to April. Pearl organ number and expression rate of the male showed highest in February to May. Dorsal fin nuptial color expression rate and index (NCI-DF) showed highest in February to May. Caudal fin nuptial color expression rate and index(NCI-CF) showed highest in February to April. The study suggested same change of internal and external reproductive parameters in female and male.

• KSBB Journal
• /
• v.20 no.1 s.90
• /
• pp.60-65
• /
• 2005

The objective of this work was to evaluate a solid-state fermentation process for the practical production of arachidonic acid(AA) by Mortierella alpina ATCC 32222. In the present investigation, batch culture kinetics for both submerged- and solid-state fermentations was carried out at $25^{\circ}C$ to identify the relationship between growth and arachidonic acid (AA) production. Glucose and yeast extract were used in submerged fermentations by using flasks, while rice bran was used as a sole raw material in the other type of fermentations by using a series of Petri dishes. It was evident that a mixed-growth associated pattern existed between the two variables, irrespective of modes of fermentations. The effect of carbon to nitrogen (CfN) ratio on AA production in solid-state fermentation was studied in the range of 6.5 - 20. As a result, an optimum condition was found to be 6.5. Supplementary carbon source was not necessary to meet the optimum C/N ratio. Unlike the Previous results obtained by other researchers, a supplement of sodium glutamate up to $4\%$ (w/w) to the rice bran medium did not have a positive effect on the AA productivity. However, an increase in AA productivity was obtained with the rice bran medium supplemented with sesame oil.

• Korean Journal of Poultry Science
• /
• v.16 no.3
• /
• pp.157-167
• /
• 1989

Pretreatment of egg white and ion exchange resins was attempted to separate lysozyme from egg white efficiently. Apparent viscosity of egg white could be decreased to 3cp by homogenization for 30 minutes at 2, 000rpm and ultrasonication for 45 minutes. The result of testing adsorption capacity of lysozyme was as follows； CM-Sephadex C-25 ＞Duolite C464＞Amberlite C-50＞Dowex MSC-1＞Amberlite IRC-50＞Amberlite IRC-84. Although CM-Sephadex C-25 showed highest adsorption capacity of lysozyme, egg white could not eluted easily. Duolite Cf64 was selected based on relatively high lysozyme adsorption and good egg white eluting property for separation of egg white lysozyme. Na$^{＋}$ form of Duolite C-464 was most effective on adsorption of Iysozyme. To separate lysozyme from egg white efficiently rinse buffer and eluting solution were selected 0.1M sodium phosphate buffer at pH 6.5 and 10% ammonium sulfate respectively. After separating lysozyme from egg white, foaming power of egg white was decreased to 85.3%. Color of egg white gel was not changed while hardness of egg white gel was decreased by 30% after separating lysozyme. However, elasticity of egg white gel was increased by 13% in lysozyme-separated egg white.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2003.05a
• /
• pp.55-55
• /
• 2003

최근 높은 해상도의 평판 디스플레이 장치 특히 차세대 TFT-LCD를 개발하기 위해서는 건식식각공정의 개발이 필수 불가결하며 이는 플라즈마 공정장치의 대면적화가 가능해야 한다. 따라서 산업계는 이러한 제조 조건에 알맞는 대면적 플라즈마 반응기 개발을 추구하고 있다. 이를 위해서는 건식식각공정의 개발이 필수 불가결하며 이를 위해선 플라즈마 공정장 치의 대면적화가 가능해야 한다. 이러한 대면적 공정을 위해서는 낮은 공정압력, 고밀도, 높은 플라즈마 균일도가 요구된다. 또한 이러한 대면적 고밀도 플라즈마에의 적용을 위하여 새로운 유도결합형 플라즈마 소오스의 개발이 진행되고 있으며, 안정적인 300mm웨이퍼 공정을 위하여 여러 형태의 안테나가 연구되어지고 있다. 그러나 차세대 TFT-LCD에 적용 가 능하게끔 기존의 ICP 소오스를 직접적으로 대면적화 하는데 있어서는 안테나의 인덕턴스의 값이 키지며, 유전물질의 두께 증가 및 그에 따른 재료비의 상슴에 의해 그 한계점을 나타 내었다. 본 연구에서는 차세대 TFT-LCD 및 POP 대면적 공정에 적용 가능한 고밀도 플라즈마를 발생시키기 위해서 내장형 유도결합형 선형 안테나를 사용하였다. 내장형 유도결합형 선형 안테나가 가지고 있는 고유의 정전기적 결합효과를 최소화시키기 위해 직사각형모양의 플라즈마 챔버(830mm*1,020mm)에서 영구자석을 사용하였다. 영구자석을 사용하여 외부자 장을 인가하였을 때가, 그럴지 않은 때보다 RF 안테나에 걸리는 코일의 전압을 낮춰주었으며, 영구자석의 배열에 따라 코일의 인덕턴스의 값이 크게 변함을 알 수 있었다. 그리고, 최적화된 자장의 배열은 플라즈마의 이온밀도를 증가시켰으며, 플라즈마 균일도 또한 10% 이 내로 유지됨을 알 수 있었다. 따른 식각 메커니즘에 대하여 알아보고자 하였다. $CF_4/Cl_2$ gas chemistry 에 첨 가 가스로 $N_2$와 Ar을 첨 가할 경 우 텅 스텐 박막과 하부 layer 간의 etch selectivity 증가는 관찰되지 않았으며, 반면에 첨가 가스로 $O_2$를 사용할 경우, $O_2$의 첨가량이 증가함에 따라 etch s selectivity 는 계속적으로 증가렴을 관찰할 수 있었다. 이는 $O_2$ 첨가에 따라 형성되는 WOF4 에 의한 텅스텐의 etch rates 의 감소에 비하여, $Si0_2$ 등의 형성에 의한 poly-Si etch rates 이 더욱 크게 감소하였기 때문으로 사료된다. W 과 poly-Si 의 식각 특성을 이해하기 위하여 X -ray photoelectron spectroscopy (XPS)를 사용하였으며, 식각 전후의 etch depth 를 측정하기 위하여 stylus p pmfilometeT 를 이용하였다.X> 피막이 열처리 전후에 보아는 기계적 특성의 변화 양상은 열역학적으로 안정한 Wurzite-AlN의 석출에 따른 것으로 AlN 석출상의 크기에 의존하며, 또한 이러한 영향은 $(Ti_{1-x}AI_{x})N$ 피막에 존재하는 AI의 함량이 높고, 초기에 증착된 막의 업자 크기가 작을 수록 클 것으로 여겨진다. 그리고 환경의 의미의 차이에 따라 경관의 미학적 평가가 달라진 것으로 나타났다.corner$적 의도에 의한 경관구성의 일면을 확인할수 있지만 엄밀히 생각하여 보면 이러한 예의 경우도 최락의 총체적인 외형은 마찬가지로

• Journal of the Semiconductor & Display Technology
• /
• v.21 no.3
• /
• pp.74-79
• /
• 2022

In this study, the plasma corrosion resistance and the change in the number of contamination particles generated using the plasma etching process and cleaning process of coating parts for semiconductor plasma etching equipment were investigated. As the coating method, atmospheric plasma spray (APS) was used, and the powder materials were Y₂O₃ and Y₃Al₅O₁₂ (YAG). There was a clear difference in the densities of the coatings due to the difference in solubility due to the melting point of the powdered material. As a plasma environment, a mixed gas of CF₄, O₂, and Ar was used, and the etching process was performed at 200 W for 60 min. After the plasma etching process, a fluorinated film was formed on the surface, and it was confirmed that the plasma resistance was lowered and contaminant particles were generated. We performed a surface cleaning process using piranha solution(H₂SO₄(3):H₂O₂(1)) to remove the defect-causing surface fluorinated film. APS-Y₂O₃ and APS-YAG coatings commonly increased the number of defects (pores, cracks) on the coating surface by plasma etching and cleaning processes. As a result, it was confirmed that the generation of contamination particles increased and the breakdown voltage decreased. In particular, in the case of APS-YAG under the same cleaning process conditions, some of the fluorinated film remained and surface defects increased, which accelerated the increase in the number of contamination particles after cleaning. These results suggest that contaminating particles and the breakdown voltage that causes defects in semiconductor devices can be controlled through the optimization of the APS coating process and cleaning process.

• Composites Research
• /
• v.36 no.4
• /
• pp.270-274
• /
• 2023

The stacking configuration of fiber-reinforced polymer (FRP) composites, achieved via the filament winding process, exhibits distinct variations compared to conventional FRP composite stacking arrangements. Consequently, it becomes challenging to ascertain the influence of mechanical properties based on the typical stacking structures. Thus, it becomes imperative to enhance the mechanical behavior and optimize the interleaved structures to improve overall performance. Therefore, this study aims to investigate the impact of incorporating amorphous halloysite nanotubes (A-HNTs) within different layers of five unique layer arrangements on the low-velocity impact properties of interleaved carbon fiber-reinforced polymer (CFRP) structures. The low-velocity impact characteristics of the laminate were validated using a drop weight impact test, wherein the resulting impact damage modes and extent of damage were compared and evaluated under microscopic analysis. Each interleaved structure laminate according to whether nanoparticles are added was compared at impact energies of 10 J and 15 J. In the case of 10 J, the absorption energy showed a similar tendency in each structure. However, at 15 J, the absorption energy varies from structure to structure. Among them, a structure in which nanoparticles are not added exhibits the highest absorption energy. Additionally, various impact fracture modes were observed in each structure through optical microscopy.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.30 no.4
• /
• pp.309-316
• /
• 2010

The performance of grass filter strips (GFS) in reducing $PO_4$-P concentrations and soil loss from the forage cropland was tested in an experiment on the 10% slope in Grassland and Forages Division, National Institute of Animal Science, Rural Development Administration (RDA) from October 2007 to September 2009. Forage cropland with rye-corn double cropping system receiving inorganic fertilizer or livestock manure (LM) were compared in a natural condition. The plots were hydrologically isolated in a randomized block layout of 3 treatments $\times$ 2 factors $\times$ 3 replicates. Main plots consisted of the length of GFS, such as $25\;m^2$ ($5{\times}5\;m$), $50m^2$ ($5{\times}10\;m$), $75m^2$ ($5{\times}15\;m$). Sub plots consisted of the type of LM, such as chemical fertilizer (CF), cattle manure (CM) and swine manure (SM). Concentrations of $PO_4$-P in surface runoff water were reduced as the length of GFS increased. Especially, GFS with 10 m and 15 m reduced $PO_4$-P concentrations significantly compared to that with 0 m (p<0.05). However, there was not significant different between $PO_4$-P concentrations of GFS with 10m and that of GFS with 15 m. Moreover, Soil loss in surface runoff water were reduced as the length of GFS increased. GFS with 15 m reduced soil loss significantly compared to that with 5 m and 10 m (p<0.05). The results from this study suggest GFS improve the removal and trapping $PO_4$-P and soil loss from forage cropland.

• Journal of Animal Science and Technology
• /
• v.53 no.4
• /
• pp.349-356
• /
• 2011

This study was conducted to investigate the effects of brown seaweed waste (BSW) fermented with DS-01 microbe on in vitro rumen microbial fermentation. In in vitro trial, three different diets supplemented with 2%, 4%, 6% BSW fermented with DS-01 either for one month or two months was tested at 3 h, 6 h, 9 h, 12 h, and 24 h incubation. The chemical composition (CP, EE, CF, and ash) between brown seaweed waste (BSW) and fermented BSW (FBSW) were not different. The contamination of pathogenic microbes was not detected in FBSW. The pH value tended to be higher with 6% level of supplementation of FBSW for one month than other treatments. The pH at 24 h was significantly higher in FBSW than that of treatments without FBSW (p<0.05). In FBSW for two months, the pH value in 6% FBSW at 3 h in vitro fermentation tended to be higher than 2% or 4% FBSW treatments (p=0.0540), but there were no differences in other fermentation times. Although the concentration of $NH_3$-N of BSW fermented for one month was higher than control at 3 h (p<0.05), the volatile fatty acid values were significantly increased in 4 and 6% FBSW fermented for one month at 6 h incubation (p<0.05). In BSW fermented for two months, the volatile fatty acid values were significantly decreased in 6% treatment at 9 h (p<0.05). As a result of in vitro trial, it was recommended that the 2~4% supplementation level of brown seaweed waste fermented with DS-01 microbe for two months could be utilized for in vivo trial in ruminants.

• Journal of Animal Science and Technology
• /
• v.53 no.2
• /
• pp.161-169
• /
• 2011

Methane production during anaerobic fermentation in the rumen represents an energy loss to the host animal and induces emissions of greenhouse gases in the environment. Our study focused on comparison in methane production from growing Korean native steers fed different grain sources. Six Hanwoo steers (BW = $180.6{\pm}3.1$ kg) were fed, on a DM basis (TDN 2.80 kg), 40% timothy and 60% barley concentrate (Barley) or corn concentrate (Corn), respectively, based on the Korean Feeding Standards. Each period lasted 18 days including a 14-day adaptation and a 4-day measuring times. The steers were in the head hood chamber system (one cattle per chamber) during each measuring time to measure heat and methane production per day. Different grain sources did not affect digestibilities of dry matter, crude protein, crude fiber, crude fat, NDF, ADF and nitrogen-free extract. The mean methane concentrations per day were 202.0 and 177.1 ppm for Barley and Corn, respectively. Methane emission averaged 86.8 and 77.7 g/day for Barley and Corn, respectively. Methane emission factor by maintenance energy requirement for the growing steers fed barley based concentrate was higher than the steers fed corn based concentrate (Barley vs. Corn, 31.7 kg $CH_4\;head^{-1}\;yr^{-1}$ vs. 28.4 kg $CH_4\;head^{-1}\;yr^{-1}$). Thus, methane conversion rate was 0.065 (6.5%) and 0.055 (5.5%) for Barley and Corn, respectively.