• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.6B
• /
• pp.387-395
• /
• 2005

In this paper, we propose an end-to-end mobility management and TCP flow control scheme which considers different link characteristics for vertical handover environments. The end-to-end mobility management is performed by using SIP protocol. When a mobile node moves to a new network, it informs its movement of the correspondent node by sending SIP INFO message containing a new IP address which will be used in the new network. And then the corresponding node encapsulates all packets with the new IP address and sends them to the mobile node. in general, RTT of WLAN is shorter than RTT of cdma2000. when the MN moves from WLAN network to cdma2000 network, TCP retransmission timeout will be occurred in spite of non congestion situations. Thus, TCP congestion window size will be decreased and TCP throughput will be also decreased. To prevent this phenomenon, we propose a method using probe packets after handover to estimate a link delay of the new network. We also propose a method using bandwidth ratio of each network to update RTT. It is shown through NS-2 simulations that the proposed schemes can have better performance than the previous works.

• Journal of information and communication convergence engineering
• /
• v.7 no.2
• /
• pp.176-181
• /
• 2009

This study is part of a project to develop and improve mooring systems for oceanographic use that include an electro-optical sensor, 1MHz Nortek Aquadopp Doppler Profiler and AIRMAR multipurpose Sensor. The adaption of Doppler current profilers to measure directional wave spectra has provided a new instrumentation approach to coastal and nearshore oceanographic studies. The HEIOB is developed are light weight and of a compact design, and can be easily installed in marine environment. Since there are no base station and gateways in marine environments, we selected CDMA and Orbcomm to send the data information. Therefore, the data can be sent by either e-mail service or Short Message Service (SMS). This paper will present some of scientific sensor results regarding real-time oceanographic and meteorological parameters such as wind spend, wind direction, wave direction, and etc. The modeling and test results highlight the engineering challenges associated with designing these systems for long lifetimes. It can also be used in future application to build wave observation buoy network in real-time using multiple ubiquitous buoys that share wave data and allow analysis of multipoint, multi-layer wave profiler.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.8
• /
• pp.1169-1174
• /
• 2002

In this paper, we implemented the sign board system that displays user's image, user's sentence, the information from DARC. The existing sign board is displaying only user's image and sentence. Or other existing sign board is displaying the information via CDMA network. However, our system is also able to display the user's message like other system and gain the information more cheap by DARC. This system includes the main processor, the program memory, the external memory, the DARC module and the LED display module. The external memory stores the user's message files and the order file that decides the displaying order of user's file and the DARC information The DARC module extracts the DARC information from FM signal. From the experiment, we could confirm that this system display the DARC information and the user's message by the order file.

• 한국정보통신설비학회:학술대회논문집
• /
• 2002.08a
• /
• pp.175-178
• /
• 2002

본 연구에서는 단문메시지서비스(SMS, Short Message Service)를 이용하여 다수의 CDMA중계기의 운용 및 보수 유지관리를 위한 망관리 서버시스템 개발내용을 기술한다. 단문메시지서비스를 이용하여, 원격지의 이동통신용 중계기를 감시, 제어하기 위한 Client/Server환경의 망관리 (NMS, Network Management System)와 하위단 SMS단말기와의 통신을 이용한 망관리 운영센터(OMC, Operating and Maintenance Center) 구축에 관한 개발과정 및 절차, 설계결과들을 기술한다. 주요 감시제어 항목은 통신링크관리, 중계기 제원관리, 운용상태관리, 중계기 상태 감시 및 제어, 장애 이력 및 통계자료 조회 및 출력, 중계기 서버 통계 및 이력검색, 보고서 작성, MMI 기능, Alarm/Event 처리 등이 있어서 이는 향후 기타 네트워크 장비관리에도 범용적으로 이용이 가능하다.

• Proceedings of the KIEE Conference
• /
• 2002.11c
• /
• pp.454-456
• /
• 2002

Embedded system is used a lot in electric home appliances and home network equipment. However, this system is designed to operate by the system operator directly at home and operator could find out them only when he pays attention to the system in case event happens. In this paper, to improve above things, it designed to remote-control system anywhere in which internet access is possible as well as at home, and also it designed SMS(short message service) information transmission system to inform the errors to the operator when they happen. To design the system, development board(be included the Strong Arm), CDMA module, and electric door lock are used as hardware, and web browser, CGI(common gateway interface) programming, and C-language are used for implementation of software in embedded-linux platform.

• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2093-2095
• /
• 2002

Nowadays, there are actually lots of changes in wireless communications of Korea. But it is not an exact PTP(Peer to Peer) Communication. In other words, a mobile station which can find fixed station can be connected with wireless internet server or other services, oppositely fixed station cannot approach to mobile station. Even though it exists, it is difficult to communicate with full duplex. We can service using CDMA 1X techniques such as cellular based SMS (Short Message Service) service or very simple MPRG Services. In this paper, we propose a system, using DirectX based mobile/fixed station stand alone program, depending on bandwidth of wireless service provider, tranceiving high resolution moving picture or reliable data regularly by a fixed connection each other.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.25 no.4
• /
• pp.334-341
• /
• 2015

This paper develops a new system for remotely monitoring and controlling the windows and doors in mobile environment. We design and implement the opening and shutting unit, the gateway, and the control server system, respectively. The opening and shutting unit consists of the driver using DC motor and the motion controller which monitors the state and transfers the control information. The gateway supports TCP/IP and CDMA protocol, which is the interface of wire and wireless communication for transferring the current state and control information. The control server consists of the program to store and process the control information, the middleware to support the processing of various state message, and DB for monitoring the state and remotely controlling the system. Especially, an application software and the Web-based user interface have also been developed to support the mobile environment. The operation performances, environment influences, driving persistences, and operation failure ratio, which are based on PC and smart-phone, have been tested in 2 authorized agencies. The test results show that the developed system has a superior performance.

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.6
• /
• pp.842-848
• /
• 2011

A fabricated hybrid control board using multi-communication is designed with a low power 8-bit microcontroller, ATxmega128A1. The microcontroller consists of 8 UART (Universal asynchronous receiver/transmitter) ports, 2 kbytes EEPROM, 128 kbytes flash memory, 8 kbytes SRAM. The 8 URAT ports are used for a multi-communication modem, a GPS module, etc. The EEPROM is used for saving a configuration for running programs, and the flash memory of 128 kbytes is used for storing a F/W (Firm Ware), and the 8 kbytes SRAM is used for stack and for storing memory of global variables while running programs. If we use the multi-communication of CDMA, TRS and RF to remotely control Aid to Navigation, it is able to remove the communication shadow area. Even though there is a shadow area for an individual communication method, we can select an optimal communication method. The compatibility of data has been enhanced as using of same data frame per communication device. For the test, 8640 of data have been collected from each buoy during 30 days in every 5 minutes and the receiving rate of the data has shown more than 85 %.

• The KIPS Transactions:PartB
• /
• v.14B no.6
• /
• pp.401-406
• /
• 2007

This study discusses the development of a u-Health care system that can detect quickly and cope actively with emergent situations of chronic disease patients who lead everyday life. If a patient's emergent situation is detected by personal health care host(PHCH), which is composed of acceleration and vibration sensors, GPS, and CDMA communication module, a text message on the patient's current location is transmitted to the hospital and the guardian's mobile terminal so that they can cope with the situation immediately. Especially, the system analyzes data from sensors by using neural network and determines emergent situations such as syncope and convulsion promptly. The exact location of patients can also be found in the electronic map by using GPS information. The experiments show that this system is very effective to find emergencies promptly for chronic disease patients who cannot take care of themselves and it is expected to save many lives.

• Journal of Advanced Navigation Technology
• /
• v.14 no.5
• /
• pp.684-690
• /
• 2010

Recently, the NG(Next Generation) system is studied for supporting convergence of various services and multi mode of single terminal. And a demand of user for taking the various services is getting increased, for supporting these services, many systems being able to transmit a large message have been appeared. In the NG system, it has to be supporting the CDMA and WCDMA besides the tele communication systems using OFDM method with single terminal An intergrated system can be improved with adopting of SoC technique. For adopting SoC technique on the intergrated terminal, we have to solve the non linear problem of HPA(High Power Amplifier). Nonlinear characteristic of HPA distorts both amplitude and phase of transmit signal, this distortion cause deep adjacent channel interference. We adopt a polynomial pre-distortion technique for this problem. In this paper, a noble modem design for NG mobile communication service and a method using polynomial pre-distorter with PAPR technique for counterbalancing nonlinear characteristic of the HPA are proposed.