• Molecules and Cells
• /
• v.39 no.7
• /
• pp.515-523
• /
• 2016

Long-term immunity to many viral and bacterial pathogens requires$ CD8^+$ memory T cell development, and the induction of long-lasting$ CD8^+$ memory T cells from a $na{\ddot{i}}ve$, undifferentiated state is a major goal of vaccine design. Formation of the memory$ CD8^+$ T cell compartment is highly dependent on the early activation cues received by $na{\ddot{i}ve}$ $CD8^+$ T cells during primary infection. This review aims to highlight the cellularity of various niches within the lymph node and emphasize recent evidence suggesting that distinct types of T cell activation and differentiation occur within different immune contexts in lymphoid organs.

• Korean Journal of Veterinary Research
• /
• v.64 no.3
• /
• pp.25.1-25.5
• /
• 2024

A 7-year-old castrated male Persian cat presented with a cutaneous mass and an increase in serum amyloid A concentration. Fine needle aspirates of the mass indicated lymphoma, which was also the top differential diagnosis on histopathologic examinations. Immunohistochemically, neoplastic cells tested negative for anti-CD3, PAX5, CD20, and c-Kit, but positive for MUM1, CD79α, and CD138, suggesting extramedullary plasmacytoma. There were tumor-infiltrating non-neoplastic CD3⁺ T and PAX5⁺ B cells. Practitioners should be aware of feline plasmacytoma characterized by lymphoma-like cytologic and histologic features. The present study is valuable in providing the first clinical evidence that proves the immunogenicity of feline plasmacytoma.

• Korean Journal of Environmental Agriculture
• /
• v.19 no.4
• /
• pp.314-318
• /
• 2000

To compare heavy metal phytoavailability in paddy soils near five abandoned mining areas, 4 different soil extractants such as 0.1M-HCl, $0.1M-HNO_3$, 0.05M-EDTA, and 0.005M-DTPA were used. Total acid digestion method $(H_2SO_4:HClO_4:HNO_3)$ was also employed to analyze heavy metal content in 30 paddy soils and brown rice. The rates of extracted heavy metal to total content were in the range of $12.1{\sim}39.1%$ for Cd, $20.5{\sim}45.5%$ for Cu, $10.6{\sim}30.7%$ for Pb, and $6.7{\sim}13.0%$ for Zn. 0.1M-HCl and $0.1M-HNO_3$ extractable both Cu and Pb were relatively less extracted at the high soil pH and extractable calcium site(Mine D) whereas 0.05M-EDTA and 0.005M-DTPA extractable Pb were strongly extracted at the same soils. In case of Cd, Cu, and Zn in soil, 4 types of extractable heavy metals and total content were highly correlated with each other. However, there were positive correlations between 0.1 M-HCl and $0.1M-HNO_3$ extractable Pb as well as between 0.05M-EDTA and 0.005M-DTPA extractable Pb, which were relatively similar extractants in chemical properties. The rates of heavy metals in brown rice to total contents in soils were in the order Zn>Cd>Cu>Pb. Specially, the rate of Cd, Pb, and Zn were lower at the highest level of soil pH and Ex. Ca. Both Cd and Zn in brown rice were positively correlated with those of all soil extractants. It was estimated that the solubility following to the plant uptake of Cd and Zn were higher than those of Cu and Pb considering relationships between all kinds of heavy metal contents in soil and those in brown rice.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.22 no.12
• /
• pp.1023-1027
• /
• 2009

Cadmium sulfide (CdS) thin film for flexible optical device applications were prepared at $H_2/(Ar+H_2)$ flow ratios on polyethersulfon (PES) flexible polymer substrates at room temperature by radio frequency magnetron sputtering technique. The CdS thin films deposited at room temperature showed a (002) preferred orientation and the smooth surface morphologies. Films deposited at a hydrogen flow ratio of 25% exhibited a photo- and dark-sheet resistance of about 50 and $2.7\;{\times}\;10^5\;{\Omega}/square$, respectively. From the result of the bending test, CdS films exhibit a strong adhesion with the PES polymer substrates and the $Al_2O_3$ passivation layer deposited on the CdS films only shows an increase of the resistance of 8.4% after exposure for 120 h in air atmosphere.

• Journal of the Korean Applied Science and Technology
• /
• v.32 no.3
• /
• pp.451-460
• /
• 2015

An enantioselective recognition of D- and L-tryptophan (Trp)-b-cyclodextrin (CD) inclusion complex was performed using electrochemical and FT-Raman spectroscopic analysis. From the electrochemical analysis, the selectivity coefficient ($K_{DL}$) of b-CD inclusion complexes was found higher than that of the D- and L-Trp in phosphate buffered saline (PBS, pH=7.0) solution. The percentage of enantioselectivity ($I_{%{ee}}$) for peak current of D-Trp-b-CD inclusion complexes was observed higher than that of L-Trp-b-CD inclusion complexes in PBS solution. From Raman spectroscopy, chemical shift difference (D, $cm^{-1}$) for the C=C stretch, ring vibration, and ring breathing of D-Try-b-CD inclusion complex were observed higher than that of L-Trp-b-CD inclusion complex. The electrochemical and Raman spectroscopic analyses were found very useful for chiral detection of racemic amino acid in the presence of b-CD.

• Archives of Pharmacal Research
• /
• v.27 no.8
• /
• pp.873-877
• /
• 2004

This study was designed to determine the optimum conditions of three different factors (mixing time, mixing temperature, and tube size) in reduction of cholesterol in milk using immobilized $\beta$-CD beads. Immobilized $\beta$-CD glass beads were prepared at different conditions of silaniza-tion and $\beta$-CD immobilization reactions. In result, the glass beads (diameter 1 mm) at 20 mM 3-isocyanatopropyltriethoxysilane and 30 mM $\beta$-CD without base showed the highest choles-terol removal rate as 41%. Using above immobilized $\beta$-CD glass beads, the cholesterol removal rate was 40.2% with 6 h of mixing time in 7 mm diameter tube at $10^{\circ}C$. After choles-terol removal from milk, the glass beads were washed for cholesterol dissociation and reused. In recycling study, the cholesterol removal rate was 41%, which was mostly same as that using new glass beads. These results indicated that cholesterol removal rate was about 40% with $\beta$-CD immobilized glass beads, however, the recycling efficiency was almost 100%.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.26-26
• /
• 2010

Cadmium sulfide (CdS) thin film for flexible optical device applications were prepared at $H_2(Ar+H_2)$ flow ratios on polyethersulfon(PES) flexible polymer substrates at room temperature by radio frequency magnetron sputtering technique. The CdS thin films deposited at room temperature showed a (002) preferred orientation and the smooth surface morphologies. Films deposited at a hydrogen flow ratio of 25% exhibited a photo- and dark-sheet resistance of about 50 and $2.7{\times}10^5{\Omega}$/square, respectively. From the result of the bending test, CdS films exhibit a strong adhesion with the PES polymer substrates and the $Al_2O_3$ passivation layer deposited on the CdS films only shows an increase of the resistance of 8.4% after exposure for 120 h in air atmosphere.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.399-399
• /
• 2012

II-V 족 화합물 반도체인 황화카드뮴(CdS)은 상온에서 2.42 eV의 밴드갭을 갖는 직접 천이형 물질로서 CdTe 또는 $CuInSe_2$와 같은 박막형 태양전지의 투과층(window layer)으로 널리 사용되고 있다. CdS 박막은 전자빔 증착법(e-beam evaporation), 화학용액증착법(chemical bath deposition), 열분해법(spray pyrolysis), 스퍼터링법(sputtering) 등으로 제작되고 있다. 이 중 스퍼터링법의 경우, 다른 증착법에 비해 조작이 간단하고 넓은 면적에서 균일한 박막을 증착할 수 있을 뿐만 아니라, 박막두께 조절이 용이하다. 따라서 본 실험에서는 RF 마그네트론 스퍼터링법으로 증착된 CdS 박막의 기판온도 및 열처리 온도변화에 따른 구조적 및 광학적 특성을 조사하였다. 기판은 RCA 기법으로 세정된 Corning Eagle 2000 유리 기판을 사용하였다. 박막 공정은 초기 진공 $1{\times}10^{-6}Torr$ 상태에서 20 sccm의 Ar 가스를 주입하고 100 W의 RF 파워, 7 mTorr의 공정 압력에서 기판 온도를 $200^{\circ}C$부터 $500^{\circ}C$까지 변화시키면서 수행하였다. 증착된 CdS 박막은 질소 분위기의 가열로(furnace)를 이용해 $300-500^{\circ}C$ 온도에서 30분간 열처리되었다. 시료들의 표면 형상은 scanning electron microscope를 사용하여 관찰하였으며, UV-vis-NIR spectrophotometer를 사용하여 400-1,000 nm 파장영역에서의 투과율을 측정하였다. 그리고 X-선 회절분석(X-Ray Diffraction)으로 결정구조를 조사하고 결정립 크기를 산출하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.378-378
• /
• 2011

ZnO 나노선 구조는 나노선 구조를 통해 입사한 빛을 산란시켜 광흡수를 촉진시키고, 바닥 전극으로 바로 이어진 수직의 1차원 구조를 통해 전자가 빠르게 이동할 수 있으며, 넓은 표면적을 가지고 있는 등의 장점을 가지고 있어 오래전부터 광전소자에 이용되었다. 하지만 ZnO 물질 자체의 밴드갭 에너지가 3.2 eV로 비교적 큰 편이라 가시광 영역의 빛을 흡수, 이용하기 위해서는 작은 밴드갭을 가지는 광감응 물질이 필요하다. 본 연구에서는 저온의 수열합성법을 통해 합성한 ZnO 나노선 구조 상에 Cd 계열의 무기물 양자점을 증착하여 이종구조를 형성하는 방법을 개발하였다. 본 연구에서 사용한 양자점인 CdS와 CdSe는 벌크 밴드갭 에너지가 각각 2.3 eV, 1.7 eV로 가시광 영역의 빛을 흡수할 수 있으며, ZnO 나노선과 type-II 밴드구조를 가지기 때문에 전자-정공 분리 및 포집에 유리하다. 합성된 구조를 이용하여 photoelectrochemical 특성을 분석하였으며, 그 결과 양자점의 증착으로 광전류 생성이 향상됨을 확인하였다. 특히 ZnO 나노선 상에 CdS 양자점 증착 후 추가적으로 CdSe 양자점을 증착하여 다중접합 나노선 구조를 형성한 경우 광전류 생성이 가장 크게 향상된 결과를 확인하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.471-471
• /
• 2011

1차원 나노 와이어는 나노 디바이스를 구현하는데 있어 중요한 요소로 연구되고 있다. 하지만 나노 와이어를 바람직한 위치에 선택적으로 배열하는 부분은 해결할 과제로 남아있다. DNA 분자가 가지고 있는 음의 전하를 띄는 phosphate backbone과 자기조립 특성은 이러한 문제점들을 해결할 수 있는 중요한 요소이다. 본 연구에서는 DNA 분자 형틀을 이용해서 CdSe/ZnS core-shell 나노입자의 pH 의 변화에 따른 표면 전위 변화를 이용하여 선택적 위치의 나노입자 배열을 통한 나노 와이어를 제작하는 연구를 하였다. 1-step 방법을 이용하여 합성한 CdSe/ZnS core-shell 나노입자를 무극성 용매인 chloroform 용액에 분산시키고 dimethylaminoethanethiol (DMAET) 를 이용하여 표면을 양전하로 치환하였다. 그리고 치환한 CdSe/ZnS 나노입자 용액에 HCl 을 이용해서 pH 7, 6, 5, 4로 변화를 주어 zeta potential 변화를 측정하였고 3-aminopropyltriethoxysilane (APTES) 코팅된 Si 기판에 ${\lambda}$-DNA를 정렬하고 이를 형틀로 이용하여 CdSe/ZnS 나노입자를 정렬하는 실험을 하였고 FE-SEM 을 이용하여 측정하였다. 그 결과 CdSe/ZnS 나노입자의 pH 값이 작아지면서 전위가 커짐에 따라서 APTES 코팅된 기판 표면에 나노입자들이 반응하는 것보다 음전하를 띄는 ${\lambda}$-DNA의 phosphate backbone에 반응하는 것이 커짐에 따라 DNA 분자 형틀에 선택적으로 나노입자가 배열되는 것을 확인하였다.