• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.9 no.2
• /
• pp.49-56
• /
• 1991

In this study, 3D positioning of CCT digital imagery was done by using a personal computer image processing method to increase the economic and time efficiency of SPOT satellite imagery. Image matching technique which applies statistical theories, was applied to acqusition of satellite imagery. The reliability of these coordinates was anlysed to presente a new algorithm for three dimensional positioning necessary in digital elevation modelling and orthophoto production. In acquiring image coordinates from CCT digital satellite imagery, accuracy of planimetric and height coordinates was improved by applying the image matching technique and it was found through analysis of correlation factors between sizes of target window that 19$\times$19 pixels was the most suitable size for image coordinate acquisition. From these results, it was able to present an algorithm about utility of digital imagery in the analysis of SPOT satellite data.

• Journal of Microbiology and Biotechnology
• /
• v.23 no.7
• /
• pp.1004-1014
• /
• 2013

Six nonpathogenic fungal strains isolated from alkaline soils of Buenos Aires Province, Argentina (Acremonium murorum, Aspergillus sidowii, Cladosporium cladosporoides, Neurospora tetrasperma, Purpureocillium lilacinum (formerly Paecilomyces lilacinus), and Westerdikella dispersa) were tested for their ability to produce keratinolytic enzymes. Strains were grown on feather meal agar as well as in solid-state and submerged cultures, using a basal mineral medium and "hair waste" as sole sources of carbon and nitrogen. All the tested fungi grew on feather meal agar, but only three of them were capable of hydrolyzing keratin, producing clear zones. Among these strains, P. lilacinum produced the highest proteolytic and keratinolytic activities, both in solid-state and submerged fermentations. The medium composition and culture conditions for the keratinases production by P. lilacinum were optimized. Addition of glucose (5 g/l) and yeast extract (2.23 g/l) to the basal hair medium increased keratinases production. The optimum temperature and initial pH for the enzyme production were $28^{\circ}C$ and 6.0, respectively. A beneficial effect was observed when the original concentration of four metal ions, present in the basal mineral medium, was reduced up to 1:10. The maximum yield of the enzyme was 15.96 $U_c/ml$ in the optimal hair medium; this value was about 6.5-fold higher than the yield in the basal hair medium. These results suggest that keratinases from P. lilacinum can be useful for biotechnological purposes such as biodegradation (or bioconversion) of hair waste, leading to a reduction of the environmental pollution caused by leather technology with the concomitant production of proteolytic enzymes and protein hydrolyzates.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.11
• /
• pp.4395-4403
• /
• 2010

The aim of this study is to know about condition of alternative medicine. Methods which An literature search in Pubmed January 2000 to March, 2010 was performed. RCT(Randomized Controlled Trial), CCT(Controled Clinical Trials), and OD(efficacy studies with either a controlled or an Other than controlled Design) were included. PubMed databases were searched using key terms relating to alternative medicine. 19 clinical trials were included among 682 studies searched. RCT was 44%, CCT was 16% and OD was 40% in the review. In the all of included studies, the acupuncture and the massage was the biggest part. The using rate was 20% of pain control about Disease of the Musculoskeletal system and Connective tissue, 15% of Certain infectious and parasitic diseases, and 15% of Neoplasms. There was lack of evidence that alternative medicine was effective for progress. Future well-designed clinical trials is needed.

• Korean Journal of Radiology
• /
• v.22 no.6
• /
• pp.890-900
• /
• 2021

Objective: To identify the association between morphological and functional characteristics of the bicuspid aortic valve (BAV) and bicuspid aortopathy and to identify the determinants of aortic dilatation using transthoracic echocardiography (TTE) and cardiac computed tomography (CCT). Materials and Methods: This study included 312 subjects (mean [SD] age, 52.7 [14.3] years; 227 males [72.8%]) who underwent TTE and CCT. The BAVs were classified by anterior-posterior (BAV-AP) or right-left (BAV-RL) orientation of the cusps and divided according to the presence (raphe+) or absence of a raphe (raphe-) based on the CCT and intraoperative findings. The dimensions of the sinus of Valsalva and the proximal ascending aorta were measured by CCT. We assessed the determinants of aortic root and proximal ascending aortic dilatation (size index > 2.1 cm/m²) by Univariable and multivariable logistic regression analyses. Results: Of the 312 patients, BAV-AP was present in 188 patients (60.3%), and 185 patients (59.3%) were raphe+. Moderate-to-severe aortic stenosis (AS) was the most common hemodynamic abnormality (54.8%). The most common type of aortopathy was the combined dilated root and mid-ascending aortic phenotype (62.5%). On multivariable analysis, age and AS severity were significantly associated with aortic root dilatation (p < 0.05), and age, sex, and AS severity were significantly associated with ascending aortic dilatation (p < 0.05). However, the orientation of the cusps, presence of a raphe, and severity of aortic regurgitation were not associated with aortic root and ascending aortic dilatation. Conclusion: BAV morphological characteristics were not determinants of aortic dilatation. Age, sex, and AS severity were predictors of bicuspid aortopathy. Therefore, age, sex, and AS severity, rather than valve morphology, need to be considered when planning treatment for BAV patients.

• Journal of Internet Computing and Services
• /
• v.24 no.2
• /
• pp.19-26
• /
• 2023

Humans have adapted and evolved to natural light. However, as humans stay in indoor longer in modern times, the problem of biorhythm disturbance has been induced. To solve this problem, research is being conducted on lighting that reproduces the correlated color temperature(CCT) of natural light that varies from sunrise to sunset. In order to reproduce the CCT of natural light, multiple LED light sources with different CCTs are used to produce lighting, and then a control index DB is constructed by measuring and collecting the light characteristics of the combination of input currents for each light source in hundreds to thousands of steps, and then using it to control the lighting through the light characteristic matching method. The problem with this control method is that the more detailed the steps of the combination of input currents, the more time and economic costs are incurred. In this paper, an LED lighting control method that applies interpolation and combination calculation based on the minimum spectral power distribution information for each light source is proposed to reproduce the CCT of natural light. First, five minimum SPD information for each channel was measured and collected for the LED lighting, which consisted of light source channels with different CCTs and implemented input current control function of a 256-steps for each channel. Interpolation calculation was performed to generate SPD of 256 steps for each channel for the minimum SPD information, and SPD for all control combinations of LED lighting was generated through combination calculation of SPD for each channel. Illuminance and CCT were calculated through the generated SPD, a control index DB was constructed, and the CCT of natural light was reproduced through a matching technique. In the performance evaluation, the CCT for natural light was provided within the range of an average error rate of 0.18% while meeting the recommended indoor illumination standard.

• Journal of electromagnetic engineering and science
• /
• v.3 no.2
• /
• pp.104-110
• /
• 2003

A ring filter is proposed as a wide-banded filter. It consists of a ring and two short stubs, which are connected at 90$^{\circ}$ and 270$^{\circ}$ points of the ring. Since the termination impedance at 90$^{\circ}$ and 270$^{\circ}$ points of the ring and the characteristic impedance of the short stub have an effect on designing of it, the relation between them and bandwidths has been studied. Based on the study, two types of small-sized wideband CVT(constant VSWR-type impedance transformer)- and CCT(constant conductance-type impedance transformer)-ring filters are introduced, designed, simulated and one of two, a CCT -ring filter, is tested. The circumference of the ring can be reduced theoretically up to 60$^{\circ}$ and two of many cases having about 300$^{\circ}$ circumferences are simulated. The simulated results show more than 100 % fractional bandwidth, which can be obtained with more than 5 stages in conventional filter-design techniques. To test the designed CCT-ring filter, it has been fabricated in microstrip technology and the measured results show good agreement with the simulated ones, having more than 100 % fractional bandwidth.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.3
• /
• pp.528-533
• /
• 1997

In the analysis of fatigue crack propagation behavior, the crack length is one of the most important factors. In the test of crack propagation, compliance method is widely used to detect crack length. The measurement of surface crack length is not so easy with compliance method. In this study, the image processing technique was applied to measure the surface crack length. CCD(Charge-coupled device) camera was used to observe the crack image and the computer program to detect crack length from stored crack image was developed. CCT(Center Cracked Tension) specimen was used to compare the compliance method with the image processing technique. The crack length which detected by the image processing techniques was found to be well consistent with that from the optical measurement.

• ETRI Journal
• /
• v.38 no.2
• /
• pp.314-325
• /
• 2016

This paper examines the resource gain that can be obtained from the creation of clusters of nodes in densely populated areas. A single node within each such cluster is designated as a "hotspot"; all other nodes then communicate with a destination node, such as a base station, through such hotspots. We propose a semi-distributed algorithm, referred to as coordinated cognitive tethering (CCT), which clusters all nodes and coordinates hotspots to tether over locally available white spaces. CCT performs the following these steps: (a) groups nodes based on a modified k-means clustering algorithm; (b) assigns white-space spectrum to each cluster based on a distributed graph-coloring approach to maximize spectrum reuse, and (c) allocates physical-layer resources to individual users based on local channel information. Unlike small cells (for example, femtocells and WiFi), this approach does not require any additions to existing infrastructure. In addition to providing parallel service to more users than conventional direct communication in cellular networks, simulation results show that CCT can increase the average battery life of devices by 30%, on average.

• Journal of Preventive Medicine and Public Health
• /
• v.44 no.4
• /
• pp.157-166
• /
• 2011

Objectives: This study was conducted to show the intraocular pressure (IOP) distribution and the factors affecting IOP in subjects with type 2 diabetes mellitus (DM) in India. Methods: We measured the anthropometric and biochemical parameters for confirmed type 2 DM patients. A comprehensive ocular examination was performed for 1377 subjects aged > 40 years and residing in Chennai. Results: A significant difference in IOP (mean ${\pm}$ standard deviation) was found between men and women ($14.6{\pm}2.9$ and $15.0{\pm}2.8$ mmHg, p = 0.005). A significantly elevated IOP was observed among smokers, subjects with systemic hypertension and women with clinically significant macular edema (CSME). After a univariate analysis, factors associated significantly with higher IOP were elevated systolic blood pressure, elevated resting pulse rate and thicker central corneal thickness (CCT). In women, elevated glycosylated hemoglobin was associated with a higher IOP. After adjusting for all variables, the elevated resting pulse rate and CCT were found to be associated with a higher IOP. Conclusions: Systemic hypertension, smoking, pulse rate and CCT were associated with elevated intraocular pressure in type 2 DM. Women with type 2 DM, especially those with CSME, were more prone to have an elevated IOP.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.8 s.239
• /
• pp.1118-1122
• /
• 2005

The direct current potential drop (DCPD) method and the unloading compliance (UC) method with a crack opening displacement gauge were applied simultaneously to the Zr-2.5Nb curved compact tension (CCT) specimens to determine which of the two methods can precisely determine the crack initiation point and hence the crack length for evaluation of their fracture toughness. The DCPD method detected the crack initiation at a smaller load-line displacement compared to the UC method. As a verification, a direct observation of the fracture surfaces on the curved compact tension specimens was made on the CCT specimens experiencing either 0.8 to 1.0 mm load line displacement or various loads from $50\%\;to\;80\%$ of the maximum peak load, or $P_{max}$. The DCPD method is concluded to be more precise in determining the crack initiation and fracture toughness, J in Zr-2.5Nb CCT specimens than the UC method.